Turnigy GT-10X 1/10 Pan Car w / Carbon-Faser-Chassis (KIT)

• Overall
• Quality
• Value

Customer Rated

Jul 14, 2016

Got my car the other day, not s bad quality car, missing 2 x steering ball studs, oh well easy fix, tyres...replaced with tamiya foam f014 front and rear, replaced spur gear to 48 pitch. Servo saver is weak, replaced, setup car for 1s speed run on a 4.5t motor, and 1s esc, tested and rsn 63mph, 101kph under speed traps, it went dead straight, next time i will crank up boost and timing, overall im happy

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 17, 2016

decent constrruction and drives well, servo saver is a bit soft so steering wont centre properly.

• Overall
• Quality
• Value

Customer Rated

Nov 02, 2015

very good car quality components an absolute bargain but the wheels are not universal meaning that only these wheels will fit apart from that the car is awesome

• Overall
• Quality
• Value

Customer Rated

Jun 12, 2015

Nearly complete. My kit did not include the pinion gear or the servo saver ball connectors. Also, the chassis damper tubes are dry and need lube to work properly. Tires and wheel are non standard and upgrades are unavailable. Handling is good on asphalt. First time out I lost pod chassis link ball connector and side springs, which is unavailable, had to refit with aftermarket components. Alternate spur gear is unavailable. Must use theadlocker on ALL components. I ultimately refitted drive with components from different manufacturer. Good buy if you don't race, or crash.

• Overall
• Quality
• Value

Certified Buyer Rated

May 27, 2015

Bought two of these. One for me and one for my wife. Great little cars. They handle nicely. The servo saver is weak and sloppy so we modded it on each car. Other than that, great cars. We are running 2s lipos in them.

• Overall
• Quality
• Value

Customer Rated

May 11, 2015

Excellent car! Three important notes I wish someone told me:
- It doesn't come with a motor pinion. Pick out a 25-40 tooth *64pitch* (I had to buy mine at a local hobby store)
- As many have mentioned the tires are horrifically bad. Mine shredded themselves at low speed. I stopped by an autozone and spent 30 minutes trying to find a radiator hose. Buy a Dayco C71593, use a knife to cut and glue with super glue They're actually spectacular as tires.
- Take out every bolt that goes into an aluminum part and add locktight! (that includes most of the bottom screws, everything related to the suspension and motor). Luckily I have extra screws of the right sizes to replace the ones I lost in 3 minutes of early test driving.
- Pro tips: Use some WS2812 LEDs and an ATTiny for great looking headlight/taillights! Partially cut the battery trey to hold a longer 2s battery and use a riser velcro to help hold it in place. Buy a nicer servo-saver. Use a prop balancer to balance the wheels for smoother high speeds.

• Overall
• Quality
• Value

Customer Rated

Apr 13, 2015

Great little platform. I was very septical at first, but after all the abuse I've put it through, and running it over 60 mph, I can say this is a great little car for the money. I do suggest ordering an extra set of wheels (or more), replace the servo saver with something stronger, and thread lock every screw! This is well worth the price!!!

• Overall
• Quality
• Value

Customer Rated

Aug 30, 2014

Ottima qualit per una macchina da un costo cos contenuto , le gomme fanno pena difatti le cambiano tutti con quelle della tamiya f104 .

Very good machine for the money but tires very bad ....

• Overall
• Quality
• Value

Customer Rated

Aug 06, 2014

I got this kit and it looked great, easy and fast build with a old Novak 540 brushless I had spare. The kits doesn't come with the needed steering ball joints on the servo saver but I already had the needed parts on hand. The ONLY real downside of this kit is the tires that comes with it. They simple wont grip on ANY known surface and the car just spins out. I have hunted all over and have not been able to find any tires that will work on this. I would love to find some rubber tires a little taller so I could use it on the street. The rims are one off kind for the rear so don't expect to walk into a hobby shop and find something that will work as its not gonna happen.

I was able to switch to a 48 tooth pinion easy and found that a Turnigy 2 cell A-Spec 4.2 lipo fits perfect but you been to take off one side of the battery holder, add the battery and replace it. I have no dought this would be a rocket ship if I could find a set of tires that would fit and hook up. If you find a work around for the tires please let me know and thanks.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 03, 2014

everything about this pan car is amazing, only docked a star because the shock dumped its oil.