Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy K-Force 40A Brushless Regler

Turnigy K-Force 40A Brushless Regler

Discontinued Product

Please continue searching for a similar product.
Gewicht:
73 g
SKU:
KF-40A
WANT FREE SHIPPING? Click here to find out more!

Die Turnigy K-Force-Serie sind auf einem völlig neuen leistungsfähigen Mikroprozessor basiert in der Regel High-Speed-Auto ESC ist reserviert für. Die neue CPU bedeutet ultraschnelle Sync Timing, schärfere Kehlenantwort, weniger Batteriebelastung und reduziert FET Wärmestau.

Technische Daten:
Ausgang: Stetig 40A
Eingangsspannung: 2-6 Zellen (5-18 Zellen NiMh)
BEC: Twin Spannung Auswahl, 5,25V und 6v.
Steuersignalübertragung: Optisch gekoppeltes System.
Größe: 59mm (L) * 27mm (W) * 12mm (H).
Gewicht: 38g.

Höchstgeschwindigkeit;
2 Pole: 210,000rpm
6 Pole: 70,000rpm
12 Pole: 35,000RPM

Eigenschaften:
Hochleistungs-Mikroprozessor (24kHz)
Heatsink entwickelt Verlustwärme schnell.
Verbesserte Normal, weich, sehr-Soft-Start-Modus
Kompatibel mit Flugzeugen und Hubschrauber.
Glatt, linear, schnell und präzise Gasannahme.
Mehrere Schutzfunktionen: Niederspannungsabschaltung Schutz / Hitzeschutz / Drosselsignalverlust Schutz
Governor Modus für Hubschrauber.
Die Firmware des ESC kann über den USB-Adapter aktualisiert werden.
Vom Anwender programmierbar über Tx, Programmierkarte oder PC-USB-Port.
Nicht kompatibel mit nicht 'K-Force "esc Programmierkarte.

  • Artikelbezeichnung KF-40A
  • Brand Turnigy K-Force
  • Kapazität ( mAh) -
  • Gewicht ( g) 73.00
  • Länge 150.00
  • Breite 14.00
  • Höhe 112.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The quality as expected BUT HOBBYKING makes people confused, as they this this product "programmable via Tx, Programming card or pc USB port." but to program by USB port yo must have the programming Card....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The quality as expected BUT HOBBYKING makes people confused, as they this this product "programmable via Tx, Programming card or pc USB port." but to program by USB port yo must have the programming Card....

I use it in mini eco expert racing boats and it still good, I have it 2 years and still the best

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use it in mini eco expert racing boats and it still good, I have it 2 years and still the best

Flew it with a 3s battery on a bixler a while a ago for a few times. After i put it in storage for a year i decided to test it as i usually do just to keep the stuff fresh. After connecting everything i revved it up on a testbench and i noticed instantaneously that it got very hot while applying only 20-30pcnt power on 3s. I pulled the power out and let it cool for a minute. After that i tried again and it bursted in smoke! If i had it in a plane it would have burned up the whole thing. Luckily it was on my test bench. Worked awsome as long as it lasted until it decided to kill itself in smoke. Nothing i would use on expensive systems. Only for some cheep epo stuff without expensive equipment.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flew it with a 3s battery on a bixler a while a ago for a few times. After i put it in storage for a year i decided to test it as i usually do just to keep the stuff fresh. After connecting everything i revved it up on a testbench and i noticed instantaneously that it got very hot while applying only 20-30pcnt power on 3s. I pulled the power out and let it cool for a minute. After that i tried again and it bursted in smoke! If i had it in a plane it would have burned up the whole thing. Luckily it was on my test bench. Worked awsome as long as it lasted until it decided to kill itself in smoke. Nothing i would use on expensive systems. Only for some cheep epo stuff without expensive equipment.

These things are awesome. The governor issue with hthe others needs to be flashed with blheli using arduino uno. I use these on my bigger rigs with high poles and low kv motors w/o heat. ONLY issue is the amount of noise on the gps frequency in some cases knocking out gps signal (bad bec) just disable bec. These are hobbywing platinum esc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These things are awesome. The governor issue with hthe others needs to be flashed with blheli using arduino uno. I use these on my bigger rigs with high poles and low kv motors w/o heat. ONLY issue is the amount of noise on the gps frequency in some cases knocking out gps signal (bad bec) just disable bec. These are hobbywing platinum esc.

good quality. Comes with motor connectors. Have to get a programming box to change parameters if you chose.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good quality. Comes with motor connectors. Have to get a programming box to change parameters if you chose.

Mont sur un HK450, aucun problme, la configuration avec la radio est un peu particulire et je ne m'y tenterai pas, j'ai utilis le cble USB avec le programme Hobbywing et aucun problme. Fonctionne trs bien avec un Turnigy Typhoon 2218.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mont sur un HK450, aucun problme, la configuration avec la radio est un peu particulire et je ne m'y tenterai pas, j'ai utilis le cble USB avec le programme Hobbywing et aucun problme. Fonctionne trs bien avec un Turnigy Typhoon 2218.

This ESC is pretty great. The very soft start is 8 secs so you won't have a problem with that, and it barely gets warm during usage. I highly recommend NOT buying any programming card, because programming with tx might be a little scary at first but it's really really easy and fast. The usb programmer might be useful for fw updates, but I'm happy with its current state already.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This ESC is pretty great. The very soft start is 8 secs so you won't have a problem with that, and it barely gets warm during usage. I highly recommend NOT buying any programming card, because programming with tx might be a little scary at first but it's really really easy and fast. The usb programmer might be useful for fw updates, but I'm happy with its current state already.

Great ESC. I haven't had any problems programming this using the Turnigy Multifunction LCD Program Box. Works great every time. Haven't had it get hot and I have given it a fair bit of stick. All around great ESC!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great ESC. I haven't had any problems programming this using the Turnigy Multifunction LCD Program Box. Works great every time. Haven't had it get hot and I have given it a fair bit of stick. All around great ESC!

No consegui ativar o modo soft start, mesmo com o carto de programao. Minha compra foi frustrada, j que o principal motivo do pedido foi ter uma acelerao inicial lenta. J tentei fazer pelo rdio Turnigy e tambm no tive sucesso. Acho que o produto est com algum problema de srie. No gostei da compra. Estou arrependido.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No consegui ativar o modo soft start, mesmo com o carto de programao. Minha compra foi frustrada, j que o principal motivo do pedido foi ter uma acelerao inicial lenta. J tentei fazer pelo rdio Turnigy e tambm no tive sucesso. Acho que o produto est com algum problema de srie. No gostei da compra. Estou arrependido.

No consegui ativar o modo soft start, mesmo com o carto de programao. Minha compra foi frustrada, j que o principal motivo do pedido foi ter uma acelerao inicial lenta. J tentei fazer pelo rdio Turnigy e tambm no tive sucesso. Acho que o produto est com algum problema de srie.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No consegui ativar o modo soft start, mesmo com o carto de programao. Minha compra foi frustrada, j que o principal motivo do pedido foi ter uma acelerao inicial lenta. J tentei fazer pelo rdio Turnigy e tambm no tive sucesso. Acho que o produto est com algum problema de srie.

Customer files
Navod CZ Download [410]
No File Name Download [646]
No File Name Download [646]
No File Name Download [646]
No File Name Download [646]
TURNIGY_K-FORCE-Series 40A_S1 Download [962]
TURNIGY_K-FORCE-Series 40A_S2 Download [845]
No File Name Download [962]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!