Turnigy Multistar 3525-650Kv 14Pole Multi-Rotor Kundschafterschulterstücke

• Overall
• Quality
• Value

Shaft size not per spec.

May 12, 2018

Please note: Threaded shaft is 6 mm not 4 mm. No prop adapter included.

• Overall
• Quality
• Value

Customer Rated

Aug 15, 2016

after re-soldering all bullet connectors there was no problem, however the material of the cables can be better, is a bit rigid for me.

• Overall
• Quality
• Value

Customer Rated

Feb 14, 2016

I use this motor in a 1:12 Me 163B aircombat plane at 6S with a 8x6.

Damn fast and much power.

The prop mount is not so nice for an airplane, but it works. My reference motor for aircombat planes up to 800g.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 10, 2015

what a great power unit, i have these mounted on my tarot fy650 running 11" props and a 4000 4s pack with 18min longest flight (pushing it a bit) very happy

• Overall
• Quality
• Value

Customer Rated

Aug 04, 2014

Running these on an Alien 560. Using an Flightmax 5000mah 4s Lipo, 30 amp HK blue ESC's flashed SimonK, 11x.4.7 GemFans, MultiWii Pro FC, FPV transmitter, camera, OSD, etc. AUW 1730grams. Hovers at slightly over half throttle, good power. 10-12 minutes flying time just cruising around.

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 01, 2014

very powerful motors, its a tight squeeze for the prop adapters but I recommend at least 12x6 3 blade props (come as pushers and pullers) from master airscrew.

• Overall
• Quality
• Value

Certified Buyer Rated

May 25, 2014

Received mine the last week. Tested with a 10x4.7 with 4S LiPo, not enough thrust.

Mount a spoon style prop 11x4.7 for a good torque.

Very good product for the Talon tricopter !

• Overall
• Quality
• Value

Customer Rated

Jan 24, 2014

I'm using this motor on my SafeFlight Copters and its giving me 10 minutes of flight time w/ a Nanotech 3000 maH lipo, 10" APC slowfly props, and flying weight of 2500 g. It comes down cool to the touch, same with the DJI 30 amp ESC.

• Overall
• Quality
• Value

Customer Rated

Nov 26, 2013

I purchased a 850KV and 650KV. 850KV was OK, but 650KV had a bad ball bearing noise and very cheap metal washer of the ball bearing was damaged.
But most issue, is the bad position of the axis when mounting in the bell. It's visible and make some vibrations, magnets are nearly touching the stator.
The other elements are very good and it's really a pity. I hope it's not a common problem and HoobyKing will control this points.

• Overall
• Quality
• Value

Customer Rated

Oct 20, 2013

buy five motors and one failure the connection of windings, it seems that do not meet the expectations placed on the product, loose terminals and poor soldiers and worm threads unfortunate complete product quality