Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy Multistar 4830-420Kv 22Pole Multi-Rotor Kundschafterschulterstücke

Turnigy Multistar 4830-420Kv 22Pole Multi-Rotor Kundschafterschulterstücke

Discontinued Product

Please continue searching for a similar product.
Gewicht:
354 g
SKU:
9392000006
WANT FREE SHIPPING? Click here to find out more!

Der Suche nach dem ultimativen Power-System für Ihre nächste Multi-Rotor-Projekt? Suchen Sie nicht weiter!

Die Turnigy Multistar outrunners sind mit einer Sache im Auge - Multi-Rotor Leistung zu maximieren! Sie verfügen über High-End-45SH Magneten, hochwertige NMB Lager, 22 Polen, benutzerdefinierte Motorhalterung und alle sind feingewuchtet für Laufruhe, diese Motoren sind speziell konstruiert für Multi-Rotor.

Der 4830-420 enthält einen Prop-Adapter (6 mm) und hat ein in Aluminium für die schnelle und einfache Installation auf Ihrem Multirotor-Rahmen eingebaut montieren. Diese Motoren sind in einem schönen Schaum geliefert ausgekleidet Multistar Metall-Box.

Diese Multistar outrunners wurden von Grund auf für Multirotor-Gebrauch entwickelt und basieren nicht auf Flugzeugmotoren.


spec:
KV (RPM / V): 420
Lipo - Zellen: 6s
Max Surge Watt (W): 650
Arbeitsstrom: 21 Ampere
Max.current (10s): 29 amps
Nein Ladestrom: 1,1 Ampere
Inteme Widerstand: 0,080 Ohm
Anzahl der Pole: 22
Abmessungen (Dia.xL): 47,5 x 33 mm
Schaft: 3 mm
Prop: 14 x 15.04 x 5
Gewicht: 154g

* Die Farbe kann variieren

  • Artikelbezeichnung 9392000006
  • Brand MultiStar
  • Gewicht ( g) 354.00
  • Länge 110.00
  • Breite 60.00
  • Höhe 75.00
  • Kv (rpm / v) 420.00
  • Max Current (A) 29.00
  • Widerstand ( mh) 8.00
  • Max Spannung (V) 22.00
  • Leistung ( W) 650.00
  • Welle A ( mm) 3.00
  • Länge B (mm) 37.00
  • Durchmesser C (mm) 48.00
  • Kann Länge D (mm) 33.00
  • Gesamtlänge E ( mm) 41.00
  • MultiStar Motors
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Vorsicht!
Es sind unter dieser Bestell-Nr. andere Motoren (4 Arm Motorflansch, kurze Anschlusskabel, keine Propellerandruckscheibe. Habe Probleme mit Rcklieferung
(geliefert aus Niederlande- Zurck ???? wohin,bernahme Kosten ???

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Vorsicht!
Es sind unter dieser Bestell-Nr. andere Motoren (4 Arm Motorflansch, kurze Anschlusskabel, keine Propellerandruckscheibe. Habe Probleme mit Rcklieferung
(geliefert aus Niederlande- Zurck ???? wohin,bernahme Kosten ???

Amazing motors, using them on my heavy duty hexa, really powerfull, i started using standard 13 apc props, then switched to 15 cf's and got 50pcnt more out of my batteries, which by the way im using a battery per motor, 2,2 and 3 mah (six 2.2 At a time, and another 6 3.0) 6s, weighing in 7 kg on the 3.0 mah batteries, with a gimbal and a dslr, using naza v2. Flying time of 15 minutes

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Amazing motors, using them on my heavy duty hexa, really powerfull, i started using standard 13 apc props, then switched to 15 cf's and got 50pcnt more out of my batteries, which by the way im using a battery per motor, 2,2 and 3 mah (six 2.2 At a time, and another 6 3.0) 6s, weighing in 7 kg on the 3.0 mah batteries, with a gimbal and a dslr, using naza v2. Flying time of 15 minutes

A replacement bearing kit photo has just been uploaded to files section. These motors use large replacement bearings which is in general a better design concept for high pole count, lower KV motors. All these Turnigy Multistar motor have the same size shaft and bearings. A size that is very common in the RC world, i.e., 686Z or 686ZZ available from many manufacturers. BOCA 686Z bearings shown in files section photo.
Best to always confirm motor has no runout before going ahead with bearing replacement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A replacement bearing kit photo has just been uploaded to files section. These motors use large replacement bearings which is in general a better design concept for high pole count, lower KV motors. All these Turnigy Multistar motor have the same size shaft and bearings. A size that is very common in the RC world, i.e., 686Z or 686ZZ available from many manufacturers. BOCA 686Z bearings shown in files section photo.
Best to always confirm motor has no runout before going ahead with bearing replacement.

I have 17 of these motors.... Most are excellent, i.e., 99pcnt balanced out of the box but I had 4 or 5 that could not be balanced. This issue was runout! Runout is a misalignment between the motor shaft and the motor bell. The motor shaft is held in place by a tiny set screw. Specialized tools may be required to get the shaft re-aligned with the motor bell. I recommend buying extra motors initially and returning those that cannot be balanced. Motor coil polarity and individual magnet polarity are all 100pcnt as are the original bearings. Use quality 686ZZ replacement bearings if/when required.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have 17 of these motors.... Most are excellent, i.e., 99pcnt balanced out of the box but I had 4 or 5 that could not be balanced. This issue was runout! Runout is a misalignment between the motor shaft and the motor bell. The motor shaft is held in place by a tiny set screw. Specialized tools may be required to get the shaft re-aligned with the motor bell. I recommend buying extra motors initially and returning those that cannot be balanced. Motor coil polarity and individual magnet polarity are all 100pcnt as are the original bearings. Use quality 686ZZ replacement bearings if/when required.

bought them for an 90cm y6 multicopter. run them on 6s and witch 15x5.5 carbon props

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bought them for an 90cm y6 multicopter. run them on 6s and witch 15x5.5 carbon props

I own 15 of these motors..... 8 for my new Octo, 1 spare and 6 for my Hex which has now had more than 100 flights using these motors..... and I will likely buy more as the price and quality meets the value I am looking for.
Note that bearings need to be replaced sooner or later and the pancake style motors are prone to damage during bearing replacement. I have sourced all parts including bearing retainer clips and have developed a jig that prevent motor winding damage during bearing replacement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I own 15 of these motors..... 8 for my new Octo, 1 spare and 6 for my Hex which has now had more than 100 flights using these motors..... and I will likely buy more as the price and quality meets the value I am looking for.
Note that bearings need to be replaced sooner or later and the pancake style motors are prone to damage during bearing replacement. I have sourced all parts including bearing retainer clips and have developed a jig that prevent motor winding damage during bearing replacement.

I own 14 of these already, 6 for my custom hex and another 8 for my new Octo. I am very pleased. However after approx 100 flights with these on my hex I had a couple of ground flips and had to replace bearings. One word of caution.... pancake style motors are prone to winding damage during bearing replacement..... additional info available upon request.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I own 14 of these already, 6 for my custom hex and another 8 for my new Octo. I am very pleased. However after approx 100 flights with these on my hex I had a couple of ground flips and had to replace bearings. One word of caution.... pancake style motors are prone to winding damage during bearing replacement..... additional info available upon request.

Great built quality, great value by the included prop mount and motor mount

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great built quality, great value by the included prop mount and motor mount

These are re-labelled HL motors. Amazingly good motors, just remember to remove the multistar sticker and clean off the glue so they are balanced again (balancing was done before sticker was added), the prop adapters are not balanced. Run these on 15-17inch CF "paddle" style props directly attached to the motor to get the most out of you motor (yes at 17inch props on an Octo means you are looking at a wheel base of about 1300mm if you do not wish to overlap the props). You are wasting the motor using wooden/APC/Turnigy props on these, they need light paddle style props to get the most out of the motor which means you need to run carbon fibre.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are re-labelled HL motors. Amazingly good motors, just remember to remove the multistar sticker and clean off the glue so they are balanced again (balancing was done before sticker was added), the prop adapters are not balanced. Run these on 15-17inch CF "paddle" style props directly attached to the motor to get the most out of you motor (yes at 17inch props on an Octo means you are looking at a wheel base of about 1300mm if you do not wish to overlap the props). You are wasting the motor using wooden/APC/Turnigy props on these, they need light paddle style props to get the most out of the motor which means you need to run carbon fibre.

well made motors, they came in nice protective metal box with foam inside. Also screws and prom mount included. Mounting wall is little thicker than on 4822 series multistar motors. only they should came with soft silicon wire instead of those wires. Motors are balanced and they run very nice. Will use them on tarot T960 hexacopter for AP.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

well made motors, they came in nice protective metal box with foam inside. Also screws and prom mount included. Mounting wall is little thicker than on 4822 series multistar motors. only they should came with soft silicon wire instead of those wires. Motors are balanced and they run very nice. Will use them on tarot T960 hexacopter for AP.

  1. 1
  2. 2
Customer files
Effciency Download [58]
Power Download [52]
Replacement bearing kit Download [1958]
Measurements of the connection holes. (A Download [183]
5 prop tests - I,V,F,e Download [745]
results with 14x4.7APC Download [73]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save