Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy Multistar 5130-350Kv 16Pole Multi-Rotor Kundschafterschulterstücke

Generating Links

Turnigy Multistar 5130-350Kv 16Pole Multi-Rotor Kundschafterschulterstücke

Preis:

Now save speichern 0,00 € 0,00 €

60,18 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9392000014
Kostenloser Versand? Klicke hier um mehr zu lernen!

Der Suche nach dem ultimativen Power-System für Ihre nächste Multi-Rotor-Projekt? Suchen Sie nicht weiter!

Die Turnigy Multistar outrunners sind mit einer Sache im Auge - Multi-Rotor Leistung zu maximieren! Sie verfügen über High-End-45SH Magneten, hochwertige NMB Lager, 16 Polen, benutzerdefinierte Motorhalterung und alle sind feingewuchtet für Laufruhe, diese Motoren sind speziell konstruiert für Multi-Rotor.

Der 5130-350 enthält einen Prop-Adapter und verfügt über ein in Aluminium für die schnelle und einfache Installation auf Ihrem Multirotor-Rahmengestell aufgebaut. Diese Motoren sind in einem schönen Schaum geliefert ausgekleidet Multistar Metall-Box.

Diese Multistar outrunners wurden von Grund auf für Multirotor-Gebrauch entwickelt und basieren nicht auf Flugzeugmotoren.


spec:
KV (RPM / V): 350
Lipo - Zellen: 6s
Max Surge Watt (W): 400
Arbeitsstrom: 13 A
Max.current (10s): 16 Ampere
Nein Ladestrom: 0,5 Ampere
Inteme Widerstand: 0,099 Ohm
Anzahl der Pole: 16
Abmessungen (Dia.xL): 51 x 30 mm
Schaft: 4 mm
Empfohlene Prop: 15 x 5.5
Gewicht: 152 g

  • Kv (rpm / v) 350.00
  • Max Current (A) 16.00
  • Widerstand ( mh) 0.00
  • Max Spannung (V) 22.00
  • Leistung ( W) 400.00
  • Welle A ( mm) 4.00
  • Länge B (mm) 30.00
  • Durchmesser C (mm) 52.00
  • Kann Länge D (mm) 20.00
  • Gesamtlänge E ( mm) 35.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

John | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jul 08, 2015

I'm going to upgrade this review of this motor. Since we replaced the bearings on all 6 units, we are impressed by the power and efficiency this motor delivers. Running on a 21lb Hex, spinning 16x5 APC props these motors don't even get warm under heavy stress. ESC's are Castle 35A multirotor ESC. It seems to be a perfect match as even the ESC's remain cool.

10Kx2 ma 22v batterys provide 30 minute mission times with a decent reserve.

We made custom tooling for these to get the out-runner can open and to remove and replace the stock bearings with NSK. Custom shims were ground to adjust the pre-load.

With the price reduced to 48 bucks this is a good deal for any project needing heay lifting power on a 22v hex

John | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 24, 2015

So sad, This motor is an epic fail...read on
Completely unusable, All 6 motors for my customers Hex have .003 in. axial play in the shaft. Once again, HK goes to great length to provide a superb looking product, Well machined, Well Wound. Only to fail with the bloody top bearing on ALL 6.

These Motor run cool, deliver the rated power and would have been a perfect match if my Hex didn't move. any roll motion caused the motors to vibrate and emit a horrible crunching sound with a serious increase in vibration. I don't trust them as they are. Put them on the shops test stand and the same issue if the assembley was rotated.

Mechanical Play is not an option on a brushless multi-rotor motor this size.

We took a chance on these and now stuck with almost $400 of SCRAP. Due to thier closed can design, bearing replacement is not an option.

Not even going to argue a return, Just will stick to the few thing my business needs that are proven to work with no issues from HK...Lesson learned

~johnny
Aromas Robotics

Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!