Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy Park450 Brushless Outrunner 1200KV

Generating Links

Turnigy Park450 Brushless Outrunner 1200KV

Preis:

Now save speichern 0,00 € 0,00 €

18,29 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
Park450-1200
Kostenloser Versand? Klicke hier um mehr zu lernen!

Entwickelt, um eine direkte Swap-out für Park 450 die Größe von Motoren sein. Diese Brushless Outrunner wird mehr Leistung und längere Laufzeiten mit seiner hohen Effizienz.
Ein Qualitätsmotor, gebaut speziell für Flugzeuge entwickelt, um mit Park 450 die Größe von Motoren zu fliegen.

Spec.
Batterie: 2 ~ 3 Zelle /7.4~11.1V
RPM: 1200KV
Max Strom: 18A
Watts: 175w
Leerlaufstrom: 11,1 V / 1,1 A
Interner Widerstand: 0,06 Ohm
Gewicht: 66g
Der Durchmesser der Welle: 4mm
Abmessungen: 28x37mm

Testdaten:
7.4V - 10X4.7 Prop - 12A - 640g Schub
11.1v - 8x4.3 Prop - 13.2a -800g Thrust

  • Kv (rpm / v) 1200.00
  • Max Current (A) 18.00
  • Widerstand ( mh) 0.06
  • Max Spannung (V) 13.00
  • Leistung ( W) 175.00
  • Welle A ( mm) 4.00
  • Länge B (mm) 18.00
  • Durchmesser C (mm) 28.00
  • Kann Länge D (mm) 33.00
  • Gesamtlänge E ( mm) 51.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

qqq | Verifizierter Käufer

  • Overall
  • Quality
  • Value

It's OK

Aug 26, 2019

Works well, just the wires are a bit weird, their insulation is quite loose.

Dominick | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Update

Jun 16, 2018

Now that I have been using this motor for almost two months & many fliest , an update. The motor continues to run strong. Having reversed the prop shat so that it is the same as the pictured has worked without issue. Have continued to use a GWS orange 8/6 prop, 3 cell 20C Turnigy 3000ma battery , & 30amp ESC. One problem has occurred in regards to the 3 motor wires. It appears that the insulation on these wires is NOT bonded to the wire core. As a matter of fact very loose around the wire. I happened to notice on a pre flight inspection that the insulation on one of the wires has slipped well forward leaving exposed wire out passed the metal case by about 3/8" ( 6-7 mm ) . Had this wire touched the case a short could have occurred. I was able to slide the insulation back into the opening on the case. I then took some clear silicone & a tooth pick & worked it into the case opening. When this set up all was secure. I highly suggest doing this to your wires before the insulation slips. Had this not have happened I would have given 5 stars. Still a good strong running motor.

koolkid9000 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Best

Mar 27, 2018

This might be the best motor I have.
I've used it on many planes like the FT Simple Cub, two FT mustangs etc.
I am ordering a second one for a twin engine so i hope i wasn't just lucky.

Brian in Grand Forks | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Great option for bloody wonders

Jul 25, 2017

Great power for foamboard planes, we are using this motor with a plush 18a ESC, APC 8x6e prop on 3S. The bloody wonders are pulling about 14A static at 140 watts WOT and weigh about 1 pound with this setup and 1500 mah battery. Combat/racing fights at full throttle last 5 mins.

Alpower | Verifizierter Käufer

  • Overall
  • Quality
  • Value

un po delicato

Dec 11, 2016

batt lipo 3s 1500 mah 20c , 30amp esc , nylon 8x5 prop , 650 grams combat profile , 5 min fling .
Però alla minima toccata si rompono subito i cuscinetti e si piega l'albero , è un pò delicato .

Aldo | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Un po delicato

Dec 08, 2016

Montato su un combat profile 600gr con elica 8x5 apc e lipo 3s1500 5 minuti a fullthrottle , sale bene , però è delicato sia di albero che di cuscinetti , dura poco ma si sa ...... è un combat .

goldenhobbies | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2015

BEWARE! When Hobbyking has a problem with an order their customer service sucks BIG TIME. I have had about 4 orders that didn't ship for days because they were out of stock on an item that I ordered and their online ordering system said it was in stock. Then it takes days for them to resolve the issue. If you are in a hurry for a big order, go elsewhere.

__:-) | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 18, 2015

Probably the nicest quality motor I've had from HK: no slop, good thick shaft and big bearings. The quality of the machining is excellent and the motor appears to be well balanced and smooth. Overall a very nice wee motor.

zejackal | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 30, 2015

A perfectly good motor for the price.

Tim | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 13, 2015

Great motor, tons of power. I am using it as a replacement on my Pz P-51 gunfighter and i get full vertical with a 9-5 Prop.

  1. 1
  2. 2
  3. 3
  4. 4
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör