Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy REAKTOR 30A 1000W Balance Charger

Generating Links

Turnigy REAKTOR 30A 1000W Balance Charger

Preis:

Now save speichern 35,97 € 35,97 €

Special Price 114,03 € 114,03 €

You save speichern 35,97 € 35,97 €

Was  150,00 €

Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9466000002-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Diese neue Turnigy REAKTOR 30A 1000W Balance Charger mit einem kompakten Gehäuse-Design werden Sie wirklich durch seine hohe Leistung wegblasen, Hochstrom und seine äußerst effizient erweiterte Synchronous Buck-Boost-DC / DC-Wandlersystem. Ein leistungsfähiger Mikroprozessor behandelt zahlreiche Arten von Lade- / Einstellungen für verschiedene Arten von Batteriechemie entladen. Hinzu kommt, dass, es kommt auch mit speziellen Funktionsmodi wie Motor (gebürstet) Einbruch und Schaum-Schnitt-Laufwerk, das wie Sahnehäubchen auf dem Kuchen sind. Zum Schutz selbst, der interne Lüfter des Reaktor wird automatisch gestartet, wenn die interne Temperatur erreicht 55 Grad Celsius (131F), wird die Ausgangsleistung automatisch um 25% reduziert. Wenn die Temperatur 60 Grad übersteigt celcius (140F), wird der Zyklus beendet.

Für zusätzliche Sicherheit während Lithium-Batterien geladen werden, sieht ein Zellenüberwachungsprogramm an der pro-Zellenspannungen, Batterietemperatur und Prozesszeit während der Ladung / Entladung. Wenn eine einzelne Zelle erscheint über geladen / entladen, die Packung zu heiß ist oder der Prozess zu lange gedauert hat, wird das Ladegerät einen Alarmton und die zugehörigen Informationen blinken erzeugen. Überwachen Sie die Gesundheit Ihrer Packung durch den Innenwiderstand des Akkus überprüft sowie die pro-Zelle-Innenwiderstand auf Balance Hahn ausgestattet Lithium-Packs. Der Reaktor hat auch einen Schutz für Verpolung (Eingang oder Ausgang), niedrige Eingangsspannung, Batterietemperatur, Ladekapazität und Zeitüberschreitung.

Im Bundle mit dem Turnigy REAKTOR 30A 1000W ist ein Array von heute Kabel, Stecker, Präzisions-Temperaturmessfühler und ein Balance Board geeignet für die meisten der Batterien auf dem Markt geladen.

Eigenschaften:
• Hohe Leistung, hohe Ströme, High-Performance-Leistungsumwandlungsschaltung
• Voraus synchronen Buck-Boost-DC / DC-Wandler-Technologie mit einer Leistung Umwandlungseffizienz, die mehr als 90% erreichen
• Der Lüfter wird Start / Stopp automatisch entsprechend der Innentemperatur und Lade / Entlade-Leistung, und schützen Sie das Ladegerät vor Überhitzung.
• Praktische Satz von 10 Batterie-Profile, die für eine spätere Verwendung gespeichert werden können
• 2x16 beleuchtetes LCD-Bildschirm, der reich Informationen einschließlich der aktiven Modus, Strom, Spannung, Gesamtladung (mah), Ladezeit und Temperatur usw. liefert
• Verschiedene Lade- / Entlade-Einstellungen und Zyklen eine breite Palette von Kundenanforderungen zu erfüllen
• Bis zu einzigartigen regenerative Ableitfähigkeit 1000W
• Einzigartige Lithiumbatterie erweitert Entladeprogramm. Wenn Sie die externe Kapazität Widerstand anschließen, können Sie es als die maximale Entladeleistung Kapazitäts 1200W verwenden (@ 40V / 30A)
• Lithium-Batteriezelle Monitor schaut auf die pro-Zellenspannungen, Batterietemperatur und Prozesszeit während der Ladung / Entladung
• Elektromotor Testmodus kann auf Lauf in gebürstetem Elektromotoren verwendet werden, Testmotorparameter und die Leistung, die Prüfung Toleranzen etc.
• Schaum-Cut-Laufwerk ermöglicht das Ladegerät als eine bequeme Stromversorgung für einen heißen Draht Styroporschneider zu wirken.
• Batterieinnenwiderstandsmessung
• Die REAKTOR Ladegerät hat Schutz für Verpolung (Eingang oder Ausgang), niedrige Eingangsspannung, Batterietemperatur, Ladekapazität und Zeitüberschreitung.
• Das Ladegerät verfügt über einen 16Mbit Flash-Speicher, die offline Lade- und Entlade-Daten in 36 Stunden anmelden können

Specs:
Eingangsspannungsbereich: 5,0 ~ 36.0VDC
Ladestrombereich: 0.05 ~ 30.0A
Entladestrom Bereich: 0,05 ~ 30.0A
Maximale Ladeleistung Kapazität: 1000 W @ Eingangsspannung 23V & 500W @ Eingang voltage12V
Maximale Entladungsleistung Leistung: 80W
Maximale regenerative Entladungsleistung Leistung: 1000W
Maximale externe Entladungsleistung Leistung: 1200W @ 40V / 30A
Stromaufnahme für den Ausgleich: <500mA
Balance Genauigkeit: <10mV
Lithium (LiPo / Lilo / Life) Batteriezellenzahl: 1 ~ 10 - Serie (In Nicht-Balance - Modus, Leben Zellzahl kann 12S erweitert werden)
NiCd / NiMH - Akkuzellenzahl: 1-25 Serie
Pb Batteriezellenzahl: 1 ~ 18series (2 ~ 36V)
Log - Dateien Lagerung: 16Mbit (31 Stunden)
Batterie - Setup Speicher: 10
Intelligente Temperaturregelung: Ja
PC anschließen: USB - Anschluss
Gewicht: 870g
Dimension: 143x146x60mm

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Byung-Yong | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Discharge Power is not 80 Watts

Jun 15, 2019

I tried to discharge a battery pack with setting of 60 watts and the charger became faulty. Now the charger repeats rebooting when I try to discharge a battery pack over 20 watts. HobbyKing sent a replacement to me but the same symptom repeats.
Please pay attention to the fact that this charger's maximum discharge power is limited to about 20 watts instead of 80 watts which is indicated in the manual.

Vadim | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 04, 2016

Peace of sh...., after 2 month broke, by disconnecting the battery display started to blink and charger started to shortcut my power supply, hobby king send my new item but with new after 6 month happened the same sh....when it works it is god but it brake fast, I am very disappointed. because last time I must wait so long until came new charger and I can't fly my planes now again the same story I hope hobby king resolve this problem this time faster

Gonzor | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 27, 2016

A good item which does all that you need.
Only degenerative discharging you have to be care full and must know
what you do.
One weak point with 10s and backload in car battery!!!
But with 3,4,5 s are no problems with all program points.
Resistance measure is good.

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 30, 2016

müll, an 3s angeschlossen und sofort gequalmt und heftig explodiert wobei das gerät feuer gefangen hat.

dank hobbyking aber anstandslos geld gutgeschrieben.

steven | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 05, 2016

i bought one of these last year i think in august. i am now on my 3rd one because they keep failing. im not sure why but the first 2 i have had went up in smoke. the first one actually had fire coming out of the cooling vents. if you want to roll the dice on a 140 dollars then do it cautiously, they do have a 1 year warranty that hobbyking backs up but i dont know what im going to do once my warranty is gone

Steve | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 27, 2016

I love the 300W. Period. It is awesomness incarnate. This has all the goody of the 300W unit with an internal discharge power of 80W. Nice little bonus. 30A is getting a little "overkill" for my purposes.

The only struggle I am having is determining how to capture log data accurate in DataExplorer. Icharger 3010 gets close, but no temp data comes across. I may have to go to logview. ew.

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 26, 2015

Very good so far after a few test charges.

On power supply will discharge 1s at 22A and 2s at 11A (I thought 8 was the max so a nice surprise).

JST-XH balance leads fit the balance port, doesn't matter which size you use, so I would recommend adding a balance lead extension to your order for however many cells yore charging. You can then make up your own charge/balance lead negating the need for the board.



Regenerative discharge (up to 30A) can discharge into 12v car battery or even another lipo, just make sure you are using a discharged lipo, there are settings to manage this for safety. It also asks you to confirm regen discharge as a double check that you aren't about to kill your power supply.



Charge voltage termination is adjustable in 0.01v/cell steps which is useful for competition where voltage checks are taken



Good solid feel to the charger, 4mm plugs pre installed on input leads.

Abo Soud | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 05, 2015

this charger is powerful, not an I charger308 duo like the one got burnt after couple of month of light use. I'm still waiting for hk to decide what should be done next. also not so expensive you'll be upset if something went wrong like that blue monster. I only miss the balance only mode which balance the cells to exact voltage without charging, nonetheless I'm happy with this for the moment as its powerful enough to charge my quad batteries all at once using a parallel board. also you don't need to buy special balancing board for this. as long as you connect the balancer starting from the right and last wire is the red one the charger will accept your balance board. I had to buy special cable to use hk parallel board to make it work with my duo not a problem here.

scottc | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Nov 09, 2014

so I have had this charger for a few weeks now, and it dose just what it is expected to do. I do only have a 350 watt power supply tho, I have do some good charging of 3/4/5 and 6 cell packs with good results that iam happy with / with this charger , now I don't get fancy with charging I just do charging/discharging and storage, well worth the money if you want a big charger, also the menu is the same as the ICharges. not sure what else to say tho. peace on Kids.

Kundendateien
Manual Download [2030]
Screen Flow Chart Download [1191]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!