Vereinigte Staaten
Shipped From:
  • UK
  • United States (US)
  • Global
  • Australia (AUS)
  • EU

Turnigy Talon Hexcopter (V1.0) Carbon Fiber-Rahmen - 625mm

Turnigy Talon Hexcopter (V1.0) C...

Die Turnigy Talon V1.0 Hexcopter Rahmen ist aus hochwertigem Echtcarbon gefertigt beide eine tolle Optik und Performance. Unsere Ingenieure setzen einen Hexcopter Rahmen ohne Kompromisse zu schaffen aus wurden mehrere Materialien getestet und ver...

Now save Speichern 12,95 € 12,95 €

Special Price 51,83 € 51,83 €

Now save Speichern 12,95 € 12,95 €

Was  64,78 €


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!


essential items and

Die Turnigy Talon V1.0 Hexcopter Rahmen ist aus hochwertigem Echtcarbon gefertigt beide eine tolle Optik und Performance. Unsere Ingenieure setzen einen Hexcopter Rahmen ohne Kompromisse zu schaffen aus wurden mehrere Materialien getestet und verworfen, bis sie beschlossen, dass nur echte Kohlefaser, die Ziele erfüllen würden wir uns vorgenommen hatten zu erreichen. Jede Komponente wurde gewogen und gemessen bloße Gramm Rasieren, wo möglich, ein geringes Gewicht und dennoch extrem steifen Rahmen zu erreichen. Wir haben damit keine Kompromisse ein und weder sollten Sie.

Der zusätzliche Hubkraft von einem Hex-Konfiguration macht diesen Rahmen ideal für größere Nutzlasten wie Kamerasysteme und andere elektronische Komponenten tragen. Dies sorgt für eine außergewöhnliche Kamera-Rig oder einfach ein sehr agil und leistungsstark für Kunstflug Multirotor-Rahmen!

Der Talon Hexcopter wird aus den gleichen hochwertigen Komponenten, die in der beliebten Talon V2 Quadcopter Rahmen verwendet werden, aber wir haben den Hauptrahmen für die Verwendung in einem Hex-Konfiguration neu gestaltet.

Bei der Entwicklung des Talon V2 nahm unser Team die bereits beliebten Talon Rahmen und studierte das Design, basierend auf dem Feedback aus dem Multirotor-Gemeinschaft und unsere eigenen Ideen, die wir den Motor Montageplatten neu gestaltet so dass für oben oder unten Montage von 28 und 35 Größe Brushless outrunner Motoren (Fotos als Referenz von verschiedenen Befestigungsmöglichkeiten sehen). Das verbesserte Spannsystem unterzog sich allein drei Re-Designs, bis unsere Ingenieure zufrieden waren, dass die perfekte Festigkeit und Gewicht sparende Kombination erreicht worden war. Der Mittelrahmen Spannsystem wurde fast doppelt so groß wie eine starke Stütze an jedem Ausleger zu gewährleisten. Jeder Aspekt dieses Rahmens wurde gründlich untersucht und durchdacht.

All dies viel Liebe zum Detail in der eleganten Einfachheit ergab, dass die Talon Hexcopter ist, ein Hex-Rahmen, die wir so stolz sind mit unserem Namen hinter, wie Sie sein, zu besitzen.

Wir bieten auch eine breite Palette von hochwertigen Multirotor-Elektronik wie Multirotor-Steuerplatine, ESC, Motoren und mehr, so gibt es keine Notwendigkeit, entweder auf dem Elektronik-Setup zu gefährden!

Gewicht: 440g (w / out Elektronik)
Breite: 625 mm
Motor Schraubenlöcher: 16/19 / 25mm

28-XX oder 35-XX Brushless Outrunner Motor x 6
18 ~ 25A Brushless Regler x 6
8x4 ~ 10x4.7 Propeller x 6 (3 Standard / 3 Rückwärtsdrehung)
Multi-Rotor Steuerplatine
2500 ~ 3300mAh 11.1V LiPoly
4-Kanal-Transmitter & Receiver


Zusätzliche Information

  • Blade- Count:
    Nicht zutreffend
  • Durchmesser X (Inch ):
  • Artikelnummer
  • Wattstunden
  • Gewicht ( g):
  • Länge:
  • Breite
  • Höhe

Schreiben Sie Ihr eigenes Review

Nur registrierte Benutzer können Bewertungen schreiben. Bitte loggen Sie sich ein oder registrieren Sie sich

Looks very good quality and sturdy but I haven't built it yet.
Good quality carbon fiber and very lightweight. There is no assembly instruction inside the pack (or may be i have not received it). BTW, I test it with 920 KV motor with 8045 prop. I have enjoyed my first Hex-copter flight without any damage.I forgot to said that, i used CC3D flight controller and multistar bheli 20A ESC. some headless nuts are missing which are important, i used hot glue for this purpose.

Thanks Hk

Good frame, don't forget to thread lock the screws. Only complaint I have there isn't any room on the frame to mount anything. I manged to squeeze a gopro on the top, and put the esc on the arms, but it looks bad. I fit the battery underneath, but now I can't put a gimbal on it. Anyway, overall it's a solid frame, but I'd look at a tarot 610 or something instead.
I have been using this frame for about 6 months now and I am VERY happy with it. It is my first 'non-toy' size frame and it has served me well. It does however have some limiting factors so I will list the pros and cons as I see them.
Very nice looking clean frame. Happy with the build quality and its looks. It's goes together easily and the flight characteristics are stable and balanced. Kit was complete with nothing missing/damaged/other. Booms were the same length and straight.
A screw hole on 1 motor mount threaded when tightening to a boom. So I have put longer screws and nuts on all. I highly recommend doing this to ALL motor mounts where it meets the boom. No issues after that. Space - you run out of it. The gap between the top and bottom plate is only enough for wiring basically and I have since added some extra surfaces to mount the FPV gear.
Longer screws and bolts on the motor mount plates where it secures to the boom. Lock-tight all screws. TAKE YOUR TIME putting it together and read the instructions. It is easy to put together but do it once and do it right. Protect the surface that you are building on, the landing gear will scratch it.

I would recommend this frame to anyone looking for a first one to learn on, but you will outgrow it. Saying that, I am awaiting a FPV250 frame which is much smaller and I will keep this as my mid-size frame.
This is a great looking kit. Don't be thrown off by the small box. The only thing that would make this better would be a larger diameter main hub. It's really small, so fitting anything other than the flight controller on there is difficult.
If you want FPV or a camera, buy the Tarot 680 kit. There's too much missing here to recommend it.

great frame with mainly good points have built a fairly serious one and the only problem I have found is although the frame is extremely crash resistant (have had some very hard ones) the clamps that hold the arms in the centre of the hub have a tendency to come loose so getting them tight takes time as parts settle and a gentle hand for getting the right amount of torque on the little m3 screws without stripping the aluminium tube nuts that hold it together however after a few hours flight and a few crashes parts seem to settle and stay tight AND THE MAIN THING YOU NEED TO KNOW is that the aluminium motor mounts at the end of the arms bend quite easily on high angle crashes while this isn't a problem if you can straighten them without snapping them but they are ten dollars each in the spare parts selection on hk .soooo with a frame selling for 80 dollars its a no brainer to just buy a whole new frame then you get a whole new frame in spares because you WILL bend those motor mounts otherwise a very good frame im happy with mine
Good workmanship, everything fits well and is quickly assembled.
This is an extremely nice kit. I own the Carbon Quad, X525, and plastic/glass quad. The Carbon Quad and this Hex Quad are by far superior and worth the extra money.

The carbon fiber is real carbon fiber, not the fake sticker stuff. The metal pieces are super light and work very well. Overall the kit fits together very nicely and is well put together. The 3 motor mount holes makes it easy to fit multiple types of motors. Currently I have the 350KV's on my Hex and the 750 KV's on my Quad. I think I prefer the 750's.

I really like that you can run the motor wires through the arm tubs for a cleaner looking craft. That is a real bonus. Keep in mind that carbon fiber is conductive so you will need to isolate your wire ends with heat shrink, tape or something to protect the leads from shorting against the carbon fiber.

The Hex is quite light for its size and is extremely sturdy. The only thing that would make it better is to have instructions, but it is easily figured out by looking at pics.

-Looks really good
-Can run motor wires through tubes
-Has 3 motor mount hole configurations
-Ample space for electronics
-Easily assembled
-Can custom adjust configuration

-No instructions
I got the same hex copter u got but the speed controlers I soderd all the black together and the red and wire the goes to the kk2 board to the main deans plug .is that ok or did I mess up.i saw it on u tube that u can soder all the black and red together to the deans plug
or do I need a power board . HELP ME
View all reviews
  • Turnigy Talon Hexcopter Frame

Upload video


essential items and


Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.