Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy TR-55 55CC Gasmotor 5.6PS

Generating Links

Turnigy TR-55 55CC Gasmotor 5.6PS

Preis:

Now save speichern 0,00 € 0,00 €

245,63 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9477000002-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Der Turnigy TR-55-Motor hat eine Leistung von 5.6PS und enthält eine komplett bearbeitete Billet-Aluminium-Kurbel, Hochleistungs-Membranventile und Anschlüsse für hohes Drehmoment! Das maschinell bearbeitete Billet-Aluminiumgehäuse ist stark und leicht, was die TR-55 in Kombination mit der Leistung, die sie ausstrahlt, perfekt für Ihre 3D- und Kunstflugzeuge der 50-55CC-Klasse macht. Da der TR-55 mit normalem Pumpgas betrieben wird, sind die Betriebskosten gering und der Spaßfaktor hoch.


Eigenschaften:
• Billet-Alu-Gehäuse mit Sandguss-Zylinderköpfen
• Elektronische CDI-Zündung
• Inklusive kompaktem Schalldämpfer


Spezifikationen:
Hubraum: 55.64cc
Leistung: 5.6 PS bei 7500 U/min
Leerlauf: 1500 U/min
Empfohlene Stütze: 22x8, 23x10
Zündkerze: (CM6)
Bohrung/Hub: 45 x 35mm
Treibstoff: 2C Normalgas gemischt 30:1 (Einfahren) - 40:1 (Normales Fliegen)

  • unboxing
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Graydon | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Incorrect carby fitting

Apr 25, 2022

The carby to reed valve fitting is incorrect. There is a gap between these ,the face of the carby is to small for the reed valve block assembly. This alows air to enter and the engine will not idle.
I have made a plate to fit between these that seals the passage.To see this fault you need to remove the cap with the big screw in it .

Serju | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Very strong

Jan 10, 2022

Very strong, runs well even at running in phase. Easy to adjust .
Could be a little better finished, regarding casting and some flashes. Best buy at this size !

thierry | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Incomplete after-sales service on dispute declare

Nov 24, 2021

Engine incorrectly fitted at the factory, central propeller fixing nut It was loosened on first use which caused the fixing bolts in the propeller plate to break. After complaint we received the front washer and the 4 bolts but not the damaged propeller plate.
So still waiting for the propeller part to be able to use it.

Jean-Francois | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Very bad motor

Oct 25, 2021

Impossible to adjust correctly iddle and hight with the screw. How I regret my DLE 55!!

JFJ | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Moteur très décevant loin de la qualité de fonctionnement du vrai DLE55

Oct 24, 2021

Impossible de régler correctement ce moteur. Si le moteur tourne bien, le lendemain il faut reprendre les réglages. Et même dans la même journée il faut reprendre les réglages. Le moteur est rodé et j'ai mis une bougie de qualité.
Impossible d'utiliser ce moteur sur un avion.

Monroe | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Curious things worth mentioning I've noticed on the new 55CC gas engine I purchased.

Oct 22, 2021

First, let me state I just today decided to leave a review, and then coming to Hobby King I found less than two weeks from my invoice date of 10/06/21, for purchase of the 55CC gas engine, it has been discounted by $35.45, it might have been discounted the day after my invoice. I'm disappointed that I was not included in the discount given so soon after my purchase.
Now for the review; I have not ran the engine as yet, I have mounted a PK 22-8 propeller while doing so and noted the propeller bolts run through the hub and without tightening them they make contact with the inner hub where the ignition magnet is installed. Looks like I will have to shorten the propeller bolts by as much as 3mm before I tighten them properly.
Additionally, I notice a "slack" in the piston action. If rotating the propeller with the spark plug and muffler removed, placing a finger lightly on top of the piston for a little resistance, there is a definite click in either direction of rotation, I presume caused by loose clearance of the rod either on the wrist pin or the crank shaft. The bearings feel smooth, but this "click/slack" concerns me. I plan to update this review after successfully running the engine.
If after getting some satisfactory airtime with the engine I will increase the rating I've given.

BP | Verifizierter Käufer

  • Overall
  • Quality
  • Value

TURNIGY 55 CC

Sep 04, 2021

Excellent value for the money.
Started easy runs really well .
It's turning a 22x10 prop in my Edge 540
Vertical performance is Amazing.

Jan-Roger | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Super!!

Jul 24, 2021

Started right out off the box.... and running strong with a 22x10 wooden prop...no adjustments so far...change the vakum tube with a longer one,because the original one is to short. With the orignal tube mounted you get a kink in it so the carburettor get no vacum to the fuel pump/membrane on top off the carburettor, therefore fuel starvation of fuel on low rpm/idle. Put in a longer vakum tube with no kinks on and engine runs beatifull! :-)

Gregory | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Garbage

Jun 17, 2021

As you can see with other reviews it won't idle. It has an air leak and I can tell you exactly where. The two engine halves are screwed together and sealant in between. Mine spews fuel from the seam. Runs good as long as you never want to land your plane because is won't idle. So what to do ship it back get another terd. Hmm probably toss it in the junk bin and call it a waste. Should have bought the DLE.

Oldrich | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Stojí to za h....Motor jde jen ve vysokých otáčkách a dělá si co chce .

May 01, 2021

Motor sám nenasaje palivo .Po dodání paliva do karburátoru jde jen ve vysokých otáčkách a dělá si co chce . Absolutně nepoužitelné . Netěsnost sání jsem nezjistil .
Vyměnil jsem i karburátor a je to stejné .

  1. 1
  2. 2
  3. 3
  4. 4
Kundendateien
Manual Download [735]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör