Registrieren

Product Finder

Einstellungen

Useful links

 
[["US","AU","GB","DE"]]
Registrieren
Shipped From:
  • Global
  • USA

Turnigy Track 1/5-Skala geber 200amp 8s Opto-Auto ESC

Turnigy Track 1/5-Skala geber 200amp 8s Opto-Auto ESC

QTY:

Now save Speichern 0,00 € 0,00 €

94,48 €
Stock:
Gewicht:
674 g
SKU:
9052000026

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Product
Description
Das ist die große! Der eine der 1/5 Baja Jungen gewartet haben!
Auf 8s ist dieser ESC fähig genug Strom zum Produkt über 5800W zu versorgen - das sind über 7,5 PS !!

Unser neues 200 Ampere Trackgeber ESC für 1 / 5. Maßstab Autos und Gas in elektrische Umwandlungen, es verfügt über eine Vollmetallgehäuse mit zwei externen Fans zu gewährleisten, ist es seine kühl hält, auch wenn ein wenig zu hart die eingebauten Wärmeschutz geschoben vorhanden ist, zum Schutz Ihrer Investition. RAW Brushless Power - Dann gibt es die riesige 8 Awg Batterie und Motorleitungen liefern den Saft dieser esc wurde mit eins im Sinn gebaut!

Unsere Track 1 / 5. ESC ist eine "Opto" Typ; was bedeutet, dass BEC ist keine eingebaute dort, benötigen Sie einen externen Ubec benutzen, um Ihre RX und Lenkservo mit Strom zu versorgen.
Dieser ESC ist programmierbar über die Trackprogrammierkarte.
Specs:
Auto Größe: 1 / 5. Skala
Arbeitsstrom: 200 Ampere
Burst - Strom: 1000 Ampere
Zellenzahl: 4-8s Lipo
Motor - Typ: Sensorless brushl ess
Ein / Aus - Schalter: Ja
Betrieb: Fwd / Bremse / rev - Fwd / Bremse nur (programmierbar)
Thermischer Überlastschutz: Ja
Batteriekabel: 8 AWG - Größe (8mm Rundstecker)
Motorkabel: 8 AWG - Größe (8mm weibliche Kugeln)
Abmessungen: 120mm x 53.5mm x45mm
Gewicht: 346g

Programmiermöglichkeiten: (über optionale Programmierkarte)
Bremse / Rückwärts-Typ
Bremsbetrag
Reverse-Betrag
Punch-Steuerung
Drag Brems
Drosselklappen Totband
Spannungsabschaltung
Motor-Timing
Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    9052000026
  • Brand:
    TrackStar
  • Gewicht ( g)
    674.00
  • Länge
    210.00
  • Breite:
    120.00
  • Höhe:
    160.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Amazing ESC, be sure to pick up a programming card as well! Great build quality and pretty decent electronics to! Best value for money for sure
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great esc put in a 1/8 buggy and the the speed was amazing until the car crashed and front diff exploded and the esc shot out the front of the car and still works fine
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my custom E-maxx based 1/5th scale short course truck. It's paired with the Redcat 980kv motor. I've run 4S, 5S, and 8S with this setup and it has been a great ESC. I've only run it about 5 times, but ESC has yet to get warn (including when I forgot to plug in the fans, lol). I'm posting now because so many people are having issues initially that I wanted to share my good experience. Strangely enough, the "other" 1/5th scale controllers have their horror stories too, but some still recommend them...oh well. I plan on picking up 2 more (1/5th scale E-maxx based monster truck and for my converted Redcat Dunerunner).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
wow got my second esc and had trouble again,little puff of smoke,did not even get to program,or check for correct rotation of motor,ended up disassembling esc and found two areas that were burnt,looks like I have to put back my vorza 6 cell esc and stay with that till I can afford something different,i doubt hobbyking will take this back after I took esc apart.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I give this contrivance full points on all accounts. First, it uses components matching truthfully to its advertised voltage rating. Second, its sensorless startup and running algorithm is much more intelligent than the average air controller. It can detect cogging and pole-slippage and will automatically try to open-loop run the motor at lower and lower rotational frequencies, until it pulls in. From there, startup is rapid.

It's designed for 1/5 scale R/C cars, but starting at roughly 1/4 scale and down, you might as well just ride it yourself! See Youtube: /watch?v=ydWABtLXjlo To do this properly, your sensorless drivetrain needs a very high (typically 15 or 20:1 and up) gear ratio. The startup performance is virtually flawless and the power available from this setup with a Aquastar T20 motor on 8S exceeds 4000W in a ground application....which is a huge deal.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I run on 1/5 GT Car, it's the 3rd time i drive this scale, normaly on 1/8 off road
you can see the video:

http://www.youtube.com/watch?v=Uk553xzfdqg&feature=youtu.be
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have had 3 go bad on me!!! J U N K!!! Cool lipos and cool motor. I bought the BEC from here so I quit. Castle XL2 from now on.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It work very good with that trackstar 1/5 esc in a baja......the standard gear is great 57/14 ! You don t need the programing card...it already programed for all lipo.


Nice gadget
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have only tested it 2 times so far on my e-bike. I only draw about 70amps in the bursts and 20 when at tops speed (stays ice cold for the whole ride) so not really pushing the esc. I use it on 5cell and it works good if it fails on me I will defiantly come back and make a new review.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice ESC, typically I dont run anything but Castle Creation or Tekin ESCs. However I have cooked 2 Mamba XLs one was a first generation and the next its replacement a V2. At that point I was fairly aggravated with Castle Creations and decided to give something else a try. I am glad I did this ESC is by far a better buy at 1/3 the cost of a Mamba XL, and so far doesnt have any of the Mambas issues. The lack of a BEC is somewhat inconvenient, but when dealing with large scale servos plus cooling fans an internal BEC really doesnt have the power you need anyways. I use a 2 cell LiFe where the T/B servo used to sit in my 5ive and that works perfectly, plus you can keep the fans running between runs to cool down the elecs.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Trackstar 1/5 Scale ESC

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.