Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy TY-P1 25Amp HEXFET Brushless Drehzahlregler

Turnigy TY-P1 25Amp HEXFET Brushless Drehzahlregler

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
TYP1-25A
WANT FREE SHIPPING? Click here to find out more!

Die Turnigy TY-P1 25Amp ESC ist eine abheben Performer. Mit Qualität IR HEXFET®-Leistungs-MOSFETs in den USA entwickelt wurde, ist das ESC-Kabel der Stromaufnahme von mehr als 40 Ampere Handhabung. Doch diese im Haus entworfen ESC wurde vom Hobbyking Engineering-Team mit einem Ziel vor Augen, Qualität und Zuverlässigkeit entwickelt und produziert. Anstatt über Rate der ESC und schieben Sie es bis an die Grenze mit einem größeren Kühlkörper, so viele Unternehmen tun, wollten wir einen Drehzahlregler für diejenigen, die eine kugelsichere Lösung suchen zu entwerfen. Wir verwenden SMT-Technologie eher als Handlöten gleichbleibender Qualität und Zuverlässigkeit jedes Mal zu erzeugen. Der TY-P1 25A ESC verfügt auch über unabhängige Spannungsregler (eine für das BEC und eine für die MCU) Dies stellt die MCU im Falle eines hohen momentanen amp Zug von der BEC-Schaltung und umgekehrt bleiben eingeschaltet. Ein XT-60 Batterie-Anschluss und 3,5-mm-Kugel-Anschlüsse haben der Einfachheit halber wurden vorge verlötet.

Specs:
Cont. Strom: 25A
Burst - Strom: 50A
BEC: 5Volts / 2amps
Gewicht: 42,5 Gramm (einschließlich Kabel und Stecker)
Batterie - Stecker: XT-60
Motor Stecker: 3,5 - mm - Rundstecker

Programmiermöglichkeiten:
Brake (OFF / ON).
Cut-off-Typ (Soft-Schnitt / Cut-off).
Cut-off-Spannung (Low / Mittel / Hoch).
Startmodus (Normal / Soft / sehr weich).
Taktmodus (Low / Mittel / Hoch).
Zelle (Auto, 2S, 3S, 4S).

Hinweis: Die Programmierung kann über die optionale Programmierkarte erfolgen. Siehe unten zugehörige Artikel.

Dieser ESC muss der Benutzer den Gasbereich auf Installation einzustellen. Bitte laden Sie das Handbuch für weitere Anweisungen.

HEXFET® ist ein eingetragenes Warenzeichen von International Rectifier Gruppe Kalifornien, USA.

  • Artikelbezeichnung TYP1-25A
  • Brand Turnigy TY-P1
  • Kapazität ( mAh) -
  • Gewicht 70.0000
  • Länge 120.00
  • Breite 10.00
  • Höhe 100.00
  • Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

love these ESC great for bigger planes like the Flite Test Guinea Pig

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

love these ESC great for bigger planes like the Flite Test Guinea Pig

come da descrizione all'atto dellla vendita, molto soddisfatto

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

come da descrizione all'atto dellla vendita, molto soddisfatto

Very good esc , easy card programming for multirotor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good esc , easy card programming for multirotor

This is very good for my Quad

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is very good for my Quad

Great works perfectly with my ft Guinea pig and just like vid says this wax is meant to be 40 amp

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great works perfectly with my ft Guinea pig and just like vid says this wax is meant to be 40 amp

Tought it was broken, but is didn't calibrate it... normally you don't have to wait so long to calibrate it but its ok. Actually these are pretty nice

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tought it was broken, but is didn't calibrate it... normally you don't have to wait so long to calibrate it but its ok. Actually these are pretty nice

I actually have 17 of these in various multirotor aircraft that have worked perfectly for years now. They are reflashed with SimonK firmware. These were bought some time ago. I bought one recently that did burn out when setting up a FPV plane, I think it was a bad solder joint either on the esc or on one of the extensions I was using because the motor kicked back and forth when trying to power up and that's a sure sign of a bad connection.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I actually have 17 of these in various multirotor aircraft that have worked perfectly for years now. They are reflashed with SimonK firmware. These were bought some time ago. I bought one recently that did burn out when setting up a FPV plane, I think it was a bad solder joint either on the esc or on one of the extensions I was using because the motor kicked back and forth when trying to power up and that's a sure sign of a bad connection.

The moment I plugged this in it blew up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The moment I plugged this in it blew up.

I can't recommend this product to anyone. Please avoid this product.

I had some test flights (5mins?) with my new quadcopter and these ESCs yesterday. After some KK2.1 parameter tuning today, I went to field to test new configuration. Right after plugging in the battery (Turnigy 2200mAh, 3S), I noticed some propeller movement, spark sounds from the esc AND SMOKE FROM THE ESC! Esc warmed a bit and is for sure broken.

Please note: the esc burned right after plugging in the battery. No throttle, no overload.

Now I am considering whether I should replace all my ESCs because if one burns like this, others may also. Next one might burn the flight controller and/or motors, if this one already didn't...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I can't recommend this product to anyone. Please avoid this product.

I had some test flights (5mins?) with my new quadcopter and these ESCs yesterday. After some KK2.1 parameter tuning today, I went to field to test new configuration. Right after plugging in the battery (Turnigy 2200mAh, 3S), I noticed some propeller movement, spark sounds from the esc AND SMOKE FROM THE ESC! Esc warmed a bit and is for sure broken.

Please note: the esc burned right after plugging in the battery. No throttle, no overload.

Now I am considering whether I should replace all my ESCs because if one burns like this, others may also. Next one might burn the flight controller and/or motors, if this one already didn't...

Bought 4 of these since they were suggested by HK for my quad project. I would not suggest getting these to use with the Multiwii board. After many, many hours of work 1 works all the time, 1 works sometimes, and 2 just beep. They all work fine connected directly to a Spektrum receiver. I don't think they communicate well with the multiwii.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 4 of these since they were suggested by HK for my quad project. I would not suggest getting these to use with the Multiwii board. After many, many hours of work 1 works all the time, 1 works sometimes, and 2 just beep. They all work fine connected directly to a Spektrum receiver. I don't think they communicate well with the multiwii.

Customer files
Manual Download [89]
Back TY-P1 Macro Download [304]
Capacitors Download [2630]
Capacitors Download [3339]
pin-out-better Download [140]
melted ground wire Download [121]
3 of 6 burn out of the box Download [1074]
3 of 6 burn out of the box Download [885]
Manual Download [93]
pin-board to flash without soldering Download [2659]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save