Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy X5 3S 5 Port Lithium-Polymer-Akku-Ladegerät

Turnigy X5 3S 5 Port Lithium-Polymer-Akku-Ladegerät

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
T-X5-3S
WANT FREE SHIPPING? Click here to find out more!
Ladung und das Gleichgewicht bis zu 5 3S Lipo-Packs zur gleichen Zeit!
Groß für 3,000mAh oder kleinere Packungen und ideal für Menschen, die länger in der Luft bleiben wollen, ohne ihre nächste Batterie warten zu müssen bis zu laden!
Da dieses Ladegerät 3A begrenzt ist, kann es durch die Balance Drähte berechnen, Verbindung einfach und schnell zu machen. Keine Notwendigkeit, mess around mit den Tasten und LCD-Bildschirme, stecken Sie einfach in Ihrem Rucksack und Sie sind bereits geladen.
Das Ladegerät verfügt über eine JST-XH Ladestecker, die es kompatibel mit Zippy, HXT, Turnigy und jede Packung mit einem JST-Adapter macht.
Spec.
Eingangsspannung: 13,5 ~ 18V DC
Ladestrom: 1.0 ~ 3.0A Einstellbar in jedem Kanal
Maximale Leistung: 190W / 15A
Präzisionswaagen: 10mV
  • Artikelbezeichnung T-X5-3S
  • Brand Turnigy
  • Kapazität ( mAh) -
  • Gewicht 293.0000
  • Länge 0.00
  • Packaging Width 0.00
  • Höhe 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

It's an OK charger, but HK does have better choices. Remember that the input voltage must be 13.5v so it may not work off your car battery, and it may not work off your home modified PC power supply. But willwork off some of the good HK Power Supplies available here.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's an OK charger, but HK does have better choices. Remember that the input voltage must be 13.5v so it may not work off your car battery, and it may not work off your home modified PC power supply. But willwork off some of the good HK Power Supplies available here.

All my 3S bateries 2,2, 1,6 and 1 A, Nanotech, are getting fat.
I checked the bateries and found ALL of them overcarged, 5,0 V per cell and some 4,8V. I opened the charger and will try set the correct charging voltage in the trim pots, if not, the litter will be their final rest place. RIP.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

All my 3S bateries 2,2, 1,6 and 1 A, Nanotech, are getting fat.
I checked the bateries and found ALL of them overcarged, 5,0 V per cell and some 4,8V. I opened the charger and will try set the correct charging voltage in the trim pots, if not, the litter will be their final rest place. RIP.

Purchased this charger for the feild... connected 3s 1000mAh and puff the magic dragon appeared right away... not reccomended!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased this charger for the feild... connected 3s 1000mAh and puff the magic dragon appeared right away... not reccomended!

When having charged, the flame went up from the start with the sound called Pons in about 10 minutes, and smoke was full all over the room on yesterday night... It was slept and saved.

This charger is very dangerous! If you buy it, it does not arrange!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

When having charged, the flame went up from the start with the sound called Pons in about 10 minutes, and smoke was full all over the room on yesterday night... It was slept and saved.

This charger is very dangerous! If you buy it, it does not arrange!!

I have four of these has have used them for almost a year. The lights are confusing at first because the lights change if it is balancing or charging. I admit that a couple of my batteries balancing plugs have not worked well in their plugs but I have charged hundreds of batteries with these chargers and they are all within 0-.05V of 4.2V when the charge is complete. I have learned that you cannot turn off the power supply and leave the batteries plugged in or it will run the batteries down as it continues to balance the cells and IT HAS TO HAVE A 13.5 VOLT (or more) POWER SUPPLY OR IT DOESN'T WORK!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have four of these has have used them for almost a year. The lights are confusing at first because the lights change if it is balancing or charging. I admit that a couple of my batteries balancing plugs have not worked well in their plugs but I have charged hundreds of batteries with these chargers and they are all within 0-.05V of 4.2V when the charge is complete. I have learned that you cannot turn off the power supply and leave the batteries plugged in or it will run the batteries down as it continues to balance the cells and IT HAS TO HAVE A 13.5 VOLT (or more) POWER SUPPLY OR IT DOESN'T WORK!!!

So far so good still working well, like all cheap balance charger, about 0.01 to 0.02 volts difference between cells after charge. Have 2 noisy fans below the box. Able to stand alone balancing for LIPO without DC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So far so good still working well, like all cheap balance charger, about 0.01 to 0.02 volts difference between cells after charge. Have 2 noisy fans below the box. Able to stand alone balancing for LIPO without DC.

el mayor problema que observo en este cargador es que necesita mas de 12 volts para funcionar, no le encuentro logica, solemos usar los cargadores en el campo de vuelo y no me parece logico tener que dejar el vehiculo en marcha

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

el mayor problema que observo en este cargador es que necesita mas de 12 volts para funcionar, no le encuentro logica, solemos usar los cargadores en el campo de vuelo y no me parece logico tener que dejar el vehiculo en marcha

After a while of testing, i checked the balance between the cells.
Cell1 : 3,88V
Cell2 : 4,31V
Cell3 : 4,41V

Total of 12,60V is good, but the balance is too bad !!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After a while of testing, i checked the balance between the cells.
Cell1 : 3,88V
Cell2 : 4,31V
Cell3 : 4,41V

Total of 12,60V is good, but the balance is too bad !!

at first it worked good but after many charges, it didn't charge well. i bought another one thinking the old one had gotten bad. but it still wasn't charging my batteries. i won't buy another one again.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

at first it worked good but after many charges, it didn't charge well. i bought another one thinking the old one had gotten bad. but it still wasn't charging my batteries. i won't buy another one again.

These chargers are great as long as you have the correct power supply. I use a Turnigy T-20Pro Quality 16A Power Supply and charge 3 2100mah quadcopter batteries in 1hr 15min.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These chargers are great as long as you have the correct power supply. I use a Turnigy T-20Pro Quality 16A Power Supply and charge 3 2100mah quadcopter batteries in 1hr 15min.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!