Turnigy ™ TGY-1440A Analog Servo (V2) 0.8kg / 0.10sec / 4.4g
Turnigy ™ TGY-1440A Analog Servo (V2) 0.8kg / 0.10sec / 4.4g
Copy and Share the Below URL
Präzise, Jitter freie Antwort für kleine Parkflyer oder Licht 3D.
Modell: TGY-1440A
Spannung: 3.7 ~ 6v
Geschwindigkeit @ 4.8V: 0.12sec
Geschwindigkeit @ 6,0V: 0.10sec
Drehmoment @ 4.8V: 0,6 kg / cm
Drehmoment @ 6.0V: 0,8 kg / cm
Gewicht: 4,4 g
Größe: 20x19.6x8.0mm
-
Artikelbezeichnung TGY-1440A
-
Brand Turnigy
-
Gewicht 19.0000
-
Länge 130.00
-
Packaging Width 8.00
-
Höhe 80.00
-
Drehmoment ( kg) (min. 0,01 kg ) 1.00
-
Speed ( Sec / 60deg ) 0.10
-
A ( mm) 25.00
-
B (mm) 21.00
-
C ( mm) 23.00
-
D ( mm) 9.00
-
E ( mm) 28.00
-
F ( mm) 15.00
ok
ok
Son demasiado delicados como los uses para algo acrobático o le des un golpe adiós servo
Son demasiado delicados como los uses para algo acrobático o le des un golpe adiós servo
good little servos, only had one glitched one in a order of six. they do the job.
good little servos, only had one glitched one in a order of six. they do the job.
great little servo for the price, getting the job done and i couldn't be happier
great little servo for the price, getting the job done and i couldn't be happier
awesome little servos fit almost perfectly into the Bonsai wing.leads are a bit short as they just reach the cavity for the receiver with not much extra. will buy again for this application if needed.
awesome little servos fit almost perfectly into the Bonsai wing.leads are a bit short as they just reach the cavity for the receiver with not much extra. will buy again for this application if needed.
excellent small servos that my FB and I now use in our indoor models.. our models get lots of combat damage but all the servos are all going good.. they are smooth and the gears are tough, non have been stripped
excellent small servos that my FB and I now use in our indoor models.. our models get lots of combat damage but all the servos are all going good.. they are smooth and the gears are tough, non have been stripped
Great little Servos. I use these on the Flite Test mini series
Great little Servos. I use these on the Flite Test mini series
Muy buen servo para usos variados en modelos electricos basicamente
Muy buen servo para usos variados en modelos electricos basicamente
Two of there power my bonsai. Nothing to complain, good performance, crash resistant. Only the original leads are too short for the bonsai on one side.
Two of there power my bonsai. Nothing to complain, good performance, crash resistant. Only the original leads are too short for the bonsai on one side.
Cheap and cheerful. I have 2 on my HK Bonsai wing and crash it into everything and 40mphplus still working fine and don't miss a beat
Cheap and cheerful. I have 2 on my HK Bonsai wing and crash it into everything and 40mphplus still working fine and don't miss a beat
Others Also Bought
-
HXT900 Micro Servo 1.6kg / 0.12sec / 9gSKU: HXT900
2,60 € -
Turnigy Plüsch 10amp Speed Controller w ...SKU: TR_P10A
11,12 € -
9,02 € -
Hobbyking 10A ESC 1A UBECSKU: 261000002
7,30 € -
HXT500 Micro Servo 0.6kg / 0.08sec / 6.2gSKU: HXT500
3,16 €
Zubehör
-
Turnigy 2211 Brushless Motor Indoor 2300kvSKU: T2211-2300
Beginnend von: 10,60 € 11,02 € -
Carbon Fiber Rod (fest) 1x750mmSKU: CF7
1,80 € -
Hobbyking ™ HK15168 Coreless Analog Servo ...SKU: HK15168
2,31 € -
2,4 GHz A-FHSS unterstützte 5CH Micro-Empf...SKU: 236000010
12,64 € -
GWS-Art Propeller 7x3.5 Schwarz (CCW) (5 S...SKU: H7011A
Beginnend von: 2,31 € 2,55 €