Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Universal-12-Wege-120A Acromodelle Power Distribution Hub W / LEDs & Dual-BECs

Universal-12-Wege-120A Acromodelle Power Distribution Hub W / LEDs & Dual-BECs

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

15,76 €
Status:
Auf Lager
SKU:
206000016-0
WANT FREE SHIPPING? Click here to find out more!

Dies ist eine Energieverteilung Nabe speziell für Acromodelle Anwendungen, bei denen spezielle, separate Stromversorgung für die Flugsteuerung und Hilfssysteme wünschenswert ist.

Es kann bis zu 8 ESC / Motoren handhaben und macht die Verkabelung Ihres Acromodelle System einfach und ordentlich.

Inbuilt, dual BEC / Spannungsregler die Verwendung Ihrer Hauptbatterie ermöglichen für die Versorgung sowohl der Flugregler (5 V) und FPV-Systeme (10 ~ 20V)

Geeignet für multirotors bis 800mm Rotor Spannweite und ein Gesamtarbeitsstrom nicht höher als 120A max.

Eigenschaften:
• Zwei integrierte UBEC und FPV Spannungsregler: 1 x 5 V festgelegt, 1 x 10 ~ 20V einstellbar
• Laufwerke bis zu 8 ESC / Motor-Kombinationen (octacopter)
• helle LED-Leuchten
• Bietet eine einfache Verdrahtung Lösung

Specs:
Max Leistung: 120A Max
Leistungsaufnahme: Bis zu 6S (22.2V)
BEC 1 Ausgang: 5V 3A befestigt (15 Watt max)
BEC 2 -Ausstoß: 10 ~ 20V einstellbar (36Watts max)
Außendurchmesser: 77mm
Innendurchmesser: 40 mm
Befestigungslöcher: 45 x 45 mm
Gewicht: 23g (einschließlich Steckerstifte)


* LEDs auf der Hauptplatine wird nur aufleuchten, wenn die 5V BEC-Modul installiert ist.

  • Artikelbezeichnung 206000016-0
  • Brand Unknown
  • Kapazität ( mAh) -
  • Gewicht 30.0000
  • Länge 70.00
  • Breite 15.00
  • Höhe 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The space between the PCB and the regulators is a bit wide, so the whole thing measures 21mm in height.
Regulators did, what they meant to do, but the adjustable one has a drop down of approx. 3V.
So you need 13V, to get it working with a 10V output (or 15V to get 12V).

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

The space between the PCB and the regulators is a bit wide, so the whole thing measures 21mm in height.
Regulators did, what they meant to do, but the adjustable one has a drop down of approx. 3V.
So you need 13V, to get it working with a 10V output (or 15V to get 12V).

Well I bought this for the BEC's... Because there were no other small form-factor adjustable and 5V BEC's avalible on this site at the time.
Neither of the BEC's work. I bought 2 of these boards, and they both act identically.
The 5V BEC outputs only around 3.8V, and the adjustable BEC is stuck at 9.2V because the variable resistor is disconnected internally and turning the knob does not change it's resistance (on BOTH of the boards!)
Pretty disappointed with this, it was pretty expensive just for some little BEC's...
Although I must admit, looking past the BEC's not working, the PCB is really nice. I just wish the BEC's worked.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well I bought this for the BEC's... Because there were no other small form-factor adjustable and 5V BEC's avalible on this site at the time.
Neither of the BEC's work. I bought 2 of these boards, and they both act identically.
The 5V BEC outputs only around 3.8V, and the adjustable BEC is stuck at 9.2V because the variable resistor is disconnected internally and turning the knob does not change it's resistance (on BOTH of the boards!)
Pretty disappointed with this, it was pretty expensive just for some little BEC's...
Although I must admit, looking past the BEC's not working, the PCB is really nice. I just wish the BEC's worked.

Good way to manage power distribution. It drastically reduces excessive wire webs. You gotta be VERY careful while soldering as the positive/negative pins have hairline gap separating them. Even a slightest error can cause serious damages and short-circuits. LEDs are blue in color, not so bright, you'll barely see them during daytime. Remember- soldering skill is needed.Rest is all good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good way to manage power distribution. It drastically reduces excessive wire webs. You gotta be VERY careful while soldering as the positive/negative pins have hairline gap separating them. Even a slightest error can cause serious damages and short-circuits. LEDs are blue in color, not so bright, you'll barely see them during daytime. Remember- soldering skill is needed.Rest is all good.

Customer files
Universal 12-way 120A Multirotor Power D Download [303]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save