Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Van Flugzeuge RV-4 Sport-Skala Balsa, Glühen / EP 1600mm (ARF)

Van Flugzeuge RV-4 Sport-Skala Balsa, Glühen / EP 1600mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
437000004
WANT FREE SHIPPING? Click here to find out more!

Die RV-4 ist eine der erfolgreichsten und meistverkauften "home-Builds" in der Welt, der RV-4 ist ein Sportflugzeug, das in Bezug auf die Cross-Country durchaus in der Lage ist, in der Tat dieses particlar Modell auf der Basis RV-4 verwendet, von Jon Johanson für seine berühmte Millenium 2000 Round the World Solo Flug.

Dieser große schau ARF baut ein traditionelles halbschaligen Licht-lagig / Balsaholzausführung für eine Kombination aus geringem Gewicht und Festigkeit verwendet wird. Die Abdeckung ist gedruckt, um eine hohe Detail Finish zu geben, die Flachpaneelanlagen und Nieten, während die hochglänzende Oberfläche für einfache Reinigung und eine ausgezeichnete Haltbarkeit macht enthält. Die RV-4 ist mit einem sehr umfassenden Hardware-Kit geliefert, die ein einzigartiges Motor / Motorsystem für entweder leuchten oder EP Antriebsstrang, einer Legierung Spinner, Tank & Motorlager, schwere und eloxierten Gabelkopf und Gestängen etc. Firewall Halterung enthält die RV-4 ist auch praktisch, der Schwanz ist abnehmbar und die Flügel sind ein Stecker in der Anordnung, das Modell verfügt auch über robuste Hauptunterwagen und ein lenkbares Spornrad.

Die RV-4 verfügt über all jene attibutes Sie bei einem großen Sportmodell aussehen würde, ein leichtes Fluggewicht mit einem großzügigen Flügelfläche kombiniert für vorhersehbare und dennoch wendig Flugeigenschaften, Klappen für ausgezeichnete langsame Geschwindigkeit Handhabung und natürlich Robustheit und Funktionalität, werfen die großen Skala aussieht, das hohe Niveau der im Lieferumfang enthaltene Hardware und der sehr attraktiven Preis, es ist ziemlich klar, dass die RV-4 ist ein stehlen!

Eigenschaften:
• Leichtbau
• Gedruckte Abdeckung mit High Level of Detail
• Stabile Unterwagen
• Umfassende Hardware-Kit inklusive
• Glow oder Electric Power
• Schneller Bauen
• Plug-in-Flügel

Specs:
Spannweite: 1600mm
Länge: 1190mm
Gewicht: 3000 g

Benötigt:
Ihre eigene 6-Kanal-TX / RX
7 x Std Servo (6 x für EP-Version)
0,46 ~ 0,52 Zweitakt Glow Motor
42mm Motor 600kv ~ 650kv (EP Version)
3300mAh ~ 4000mAh 4s Lipo Akku (EP Version)
60A OPTO ESC (EP Version)
RX-Batterie
RX Ein / Aus-Schalter
UBEC / Regler ggf. (Lipo RX Batterie)

  • Artikelbezeichnung 437000004
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 4180.0000
  • Länge 940.00
  • Breite 260.00
  • Höhe 330.00
  • Van's Aircraft RV-4 Sport Scale Balsa
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Ok here again, action speaks louder than words! You will see so e loops, rolls, stall turn, inverted and half-assed knife edge etc.

radiobirds .com /?articleID=66&type=article (please omit spaces)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok here again, action speaks louder than words! You will see so e loops, rolls, stall turn, inverted and half-assed knife edge etc.

radiobirds .com /?articleID=66&type=article (please omit spaces)

http://radiobirds.com/?articleID=66&type=article

See it flies, action speaks louder than words!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

http://radiobirds.com/?articleID=66&type=article

See it flies, action speaks louder than words!

Looks as good as it flies and flies as good as it looks. 15cc gas used with 15x6 prop. Flies slow, lands slow. No bad habit. Low stall speed even with the weight of gasso and 100g of lead on the tail. Elevator push rod has some friction but it was rectified by changing them to full metal push rods. Flaps are redundant but sure can slow down the landing speed. Servo tray flexes easily, but not a 3D plane so I don't care much

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks as good as it flies and flies as good as it looks. 15cc gas used with 15x6 prop. Flies slow, lands slow. No bad habit. Low stall speed even with the weight of gasso and 100g of lead on the tail. Elevator push rod has some friction but it was rectified by changing them to full metal push rods. Flaps are redundant but sure can slow down the landing speed. Servo tray flexes easily, but not a 3D plane so I don't care much

Further to my earlier review - I flew the plane today and it is a great flyer. I leveled out all control surfaces before flying and it flew "out of the box" with no trims needed. I used the recommended motor NTM 4248/650 kV and prop 14x6. With 4S, 3000 mAh it drew 45A and gave a torque of 3 kg which is same as full weight of plane with battery. It is a very forgiving plane, easy to fly almost like a trainer. Only small problem- the supplied wheels are off center and too large for the wheel cover so I recommend installing slightly smaller wheels. Still as I said in my earlier review, the plane is a true bargain, very nice looking with lots of details as well as a great flyer. A grand 5 crowns version

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Further to my earlier review - I flew the plane today and it is a great flyer. I leveled out all control surfaces before flying and it flew "out of the box" with no trims needed. I used the recommended motor NTM 4248/650 kV and prop 14x6. With 4S, 3000 mAh it drew 45A and gave a torque of 3 kg which is same as full weight of plane with battery. It is a very forgiving plane, easy to fly almost like a trainer. Only small problem- the supplied wheels are off center and too large for the wheel cover so I recommend installing slightly smaller wheels. Still as I said in my earlier review, the plane is a true bargain, very nice looking with lots of details as well as a great flyer. A grand 5 crowns version

I have just received mine and just started assembly so not flown as yet.
First impressions- it looks very quality and well presented. People who are speculating if it is an old V-Mar model I can tell you the instruction book is V-Mar dated 2002!
The model gives the impression of one of the very early Chineese type kits altho I think V-Mar made in Vietnam. Very impressed with the standard of the hardware package - for a change! Very nice anodised and colouerd alloy horns and push rod connectors. And a very clever EP conversion power pod module.
However as I started the assembly the very poor quality control at the factory became evident. Very nice F/glass wheel pants but when fitted to the fibreglass undercarriage the wheels will not revolve - they catch on the inside top of the wheel pant. I can only think of a smaller size wheel being the fix for this? I have left the pants off in the meantime.
When fitting the tail plane - the factory has left the slot in the tail joined with a block of balsa so the tail plane won't slide into the slot. I had to saw this block out and then sand the slot smooth. The little metal fitting that slots into the rudder to activate the tail wheel is not glued in .
The main wings have a wooden dowell locating peg at their trailing edge which fits into the fuselage. Mine only had one dowell in one of the wings and it was about 5 sizes too big and had

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have just received mine and just started assembly so not flown as yet.
First impressions- it looks very quality and well presented. People who are speculating if it is an old V-Mar model I can tell you the instruction book is V-Mar dated 2002!
The model gives the impression of one of the very early Chineese type kits altho I think V-Mar made in Vietnam. Very impressed with the standard of the hardware package - for a change! Very nice anodised and colouerd alloy horns and push rod connectors. And a very clever EP conversion power pod module.
However as I started the assembly the very poor quality control at the factory became evident. Very nice F/glass wheel pants but when fitted to the fibreglass undercarriage the wheels will not revolve - they catch on the inside top of the wheel pant. I can only think of a smaller size wheel being the fix for this? I have left the pants off in the meantime.
When fitting the tail plane - the factory has left the slot in the tail joined with a block of balsa so the tail plane won't slide into the slot. I had to saw this block out and then sand the slot smooth. The little metal fitting that slots into the rudder to activate the tail wheel is not glued in .
The main wings have a wooden dowell locating peg at their trailing edge which fits into the fuselage. Mine only had one dowell in one of the wings and it was about 5 sizes too big and had

Kit arrived and as always in good condition. Workmanship of the plane is truly very good except for one thing. The white cover is semi transparent. Prints on the cover is excellent so I wonder why manufacturer did not use a white opaque covering film. You can actually see it on the pictures here if you look closely - you can see the balsa/ply structure on body and wings. One great feature- the landing gear is mounted with shock absorbing rubber inserts. But it seems from the manual that battery mounting is not so clever using a plywood box mounted to the firewall. Not sure if need to remove the cowling to install battery. But will see how it can be done in an easy way once I build the plane. Another feature not mentioned in the description - it comes with the pilot and a great looking 3D instrument panel. I am not sure if pilot is supposed to look like Jon Johansen whom I think is od Scandinavian decent? To me he looks like a South American. In all, this is a great looking plane, very high quality and at a fantastic low price. I am sure it will be a great flyer - will let you know.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Kit arrived and as always in good condition. Workmanship of the plane is truly very good except for one thing. The white cover is semi transparent. Prints on the cover is excellent so I wonder why manufacturer did not use a white opaque covering film. You can actually see it on the pictures here if you look closely - you can see the balsa/ply structure on body and wings. One great feature- the landing gear is mounted with shock absorbing rubber inserts. But it seems from the manual that battery mounting is not so clever using a plywood box mounted to the firewall. Not sure if need to remove the cowling to install battery. But will see how it can be done in an easy way once I build the plane. Another feature not mentioned in the description - it comes with the pilot and a great looking 3D instrument panel. I am not sure if pilot is supposed to look like Jon Johansen whom I think is od Scandinavian decent? To me he looks like a South American. In all, this is a great looking plane, very high quality and at a fantastic low price. I am sure it will be a great flyer - will let you know.

Customer files
No File Name Download [362]
No File Name Download [315]
No File Name Download [274]
No File Name Download [234]
No File Name Download [377]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save