Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

X-1 Mini-Fliegen-Flügel EPO 600mm (ARF)

X-1 Mini-Fliegen-Flügel EPO 600mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1 g
SKU:
304000012-0

Combine

essential items and
esc
servo
motor
acc
Product
Description

Eine schnelle, Spaß Nurflügler, die schnell zu bauen, schnell und preiswert? Der X-1 Nurflügel kommt als voll EPO Zelle Kit geformt, was bedeutet, können Sie wählen, was Motor, Batterie und Elektronik-Paket Sie wollen!

Gebäude geht schnell wie die Zelle ist 1 Stück. Schrauben Sie einfach auf den Kunststoff cloroplast Flossen, in Servos fallen und fliegen! Es kann bereit sein, in weniger als 2 Stunden gehen. Als völlig geformte EPO-Schaum, ist das Modell leicht und super haltbar. Die geringe Größe macht den X-1 ein ideales Modell für im Auto zu halten oder auf Wanderungen in einem Rucksack nehmen!

Eigenschaften:
• Fast fertig zu fliegen - das Modell mit Ihrer Wahl von Elektronik und Batterie bauen
• Geformte EPO Airframe
• Schraub-cloroplast Kunststoff Flossen
• Große Batterie / Elektronikschacht - ideal für einen Mikro FPV-Setup
• Geringe Anzahl von Teilen, schnell zu bauen
• Schnelle und Spaß!

Specs:
Spannweite: 600 mm
Länge: 400 mm
Fliegen Gewicht: 270g

Erforderlich:
3-Kanal-Sender und Empfänger mit Elevon Misch
3S 11.1V 1300mAh Lipo Akku
2 x 9g Servos
12A ESC
1806 2100kv Brushless Motor
5x3 Propeller

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    304000012-0
  • Brand:
    HobbyKing
  • Gewicht ( g)
    1155.00
  • Länge
    645.00
  • Breite:
    100.00
  • Höhe:
    400.00
  • Kanäle
    Nein
  • IC / 2: Elec
    Nein
  • Motorgrösse ( diam -or- cc):
    Nein
  • Spannweite (mm):
    600.00
  • Length(mm)
    Nein
  • SaleWeight ( g)
    Nein
  • Frame / PNF / RTF (mm):
    ARF
  • Kapazität ( mAh):
    Nein
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Two words - JUST FUN! it took me all of 15 minutes to get this from box to flying with FPV. It takes you back to fun flying. The video about the product is spot on, I ran it straight into the ground and it didnt damage anything. Great fun for the price and was able to use a spare multi rotor motor i had laying around.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very small, might fly quite slow with the right setup, I have a funfighter motor and ESC combo and it is crazy fast and twitchy even with a 1600 3S strapped in. Good fun and quite tough.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super flugeigenschaften sowohl langsam oder auch schnell, ist auch genug platz um alles unterzubringen . Habe ein 3s 1000er akku wrde auch noch locker 1300 passen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Can't beat this little bullet for the price! This is the first RC plane I have flown in 15 years and it was no problem. I have been messing with quads for FPV for the last 2 years but wanted to try out a tiny plane for FPV and watched this video: https://www.youtube.com/watch?v=UoqZs8OxKrY I was sold. I put it together with spare quad parts I had. The plane is durable and really does take a crash well. First flight I nosed right into the dirt due to a poor CG. That is my only complaint: poor explanation of the CG which is critical. Otherwise it's a great buy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The only down side to it is the complete lack of instructions. There are three important things to know: First, the CG should be set at around 7 mm ahead of the slot that carries the servo wires through the wing. Second, in order to mount the motor you will have to unglue the wooden motor mount, drill it for your motor, bolt the motor to it and then re-glue the mount. Use hot glue so you can unglue the mount again easily if you need to change motors later on. Third, set your elevons flush with the wing root trailing edge for the first flight. This wing already has the needed "up elevator" amount molded into the shape of the airfoil. I have crashed this wing several times trying to find the best cg position and I can say it is extremely strong. I highly recommend this product if you are looking for a very nice-flying, small wing. Would also make an excelent light-weight fpv model.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excelent little wing. Flies fantastically. I set mine up for line-of-sight flying (no fpv). Used 5-gram servos (hxt 500), a zmr 1804 2400 kv motor, 5x4 gemfan prop, 12 amp AFRO ESC, orange R410x receiver and an 850mah 30C 3S lipo pack. Ready-to-fly weight came in at 230 grams (much lighter than the design flying weight of 270 grams). It will do unlimited verticals in this set-up with this weight (at 1000 meters above sea level, 28 degrees C). I subsequently lit the wing up with internal leds (it's an awesome night-flyer in this configuration). Flying weight now is 240 grams and it will almost do unlimited verticals at that weight, but not quite. I will post a picture of the lit-up wing under the "files" tab above. Endurance is 16 minutes with the leds off and 14 minutes with leds on.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I forgot to mention that, if you need the extra room or you need to move stuff forward to get the right cg, you can cut off the epo bulkhead in the middle of the fuselage without any ill effects. I did this on mine. If you want to preserve the original stiffness during negative-g maneuvers, simply hot-glue a small piece of balsa wood to the top part of the fuselage (underneath the top hatch, so it's internal to the wing when the hatch is on). I did this too but then one day I noticed that the piece of balsa wood had come unglued on one side, with no noticeable effects on the flight characteristics, even when performing sequential inverted (outside) loops.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this to try to get some speed.
I have 20A 2825kv 4s setup with 6x4 prop three blade...
It flyes insane fast, going to test a 5x5 high speed prop..
it flyes faster than my Synapse edf...
It is not stable in high speed fligh, but ok is slower speed...
Good quality...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i am planing to meiden this wing with ax 1806 on her!

actually i want a not so fast micro fpv wing and after maiden i will downgrade the motor for some test.

nice finishing and i guess i can unscrew the fins and pack the wing in her box for transport!

the canopy require a extra small (micro) pair of magnets somwhere in the midle , otherwuse im afraid i will lose it on the flight

htx900

AX1806/2100kv

AR400

3s1000-1300mah

1300 seems to be max.

verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • X-1 Mini Flying Wing EPO 600mm

  • Skywalker X-1 Wing

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
x1_internal_leds download now [1587kb]

Combine

essential items and
esc
servo
motor
acc

Produkttags

Andere Leute haben dieses Produkt mit diesen Tags gekennzeichnet:

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.