This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The 3D/6G stabilization system is switchable between beginner mode and 3D mode via a simple push button on the top of the transmitter. In full stabilization mode, the amount of pitch, roll, and yaw is limited, plus it mixes in a small amount of rudder with the ailerons to enable it to perform perfectly coordinated turns, ideal for beginners. In 3D mode, it will allow the T-28 Trojan to carry out many aerobatic maneuvers such as loops, rolls, and much more. If you have 3D mode selected and get into a muddle whilst flying, a simple press of the button will return the model to the fully stabilized mode and it will return to normal level flight. The supplied transmitter also has an aileron and elevator rates function, once again this is a simple push button that will increase, or decrease the amount of throw of the control surfaces. Also included is a fail-safe system which will prevent any flyaways if the signal is lost between the transmitter and receiver.

The model is very quick to assemble and all the necessary tools are supplied in the box, no gluing is required. All the components are screwed together, which makes it perfect if you want to fit it back into its box for transportation, this makes it an ideal companion to take with you on vacation!

If you wish to fly the T-28 with your own transmitter then the included receiver/gyro board can operate with Futaba S-BUS receivers or any other receivers with S-BUS ports. It will also work with multi-protocol transmitters if the correct protocol is set, details in the user manual.

The model is supplied with everything you need to fly out of the box (except Tx batteries) including a 3.7V 400mAh battery, and USB charger.

Features:
• A beautiful ready-to-fly scale model of a T-28 Trojan
• Supplied with everything you need to fly including a 2.4GHz transmitter (Tx batteries not supplied)
• Includes a 3D/6G switchable gyro system making it suitable for beginners and experts
• Manufactured in tough, durable, crash-resistant EPP foam
• Fail safe to stop flyaways in the event of signal loss
• Has the ability to use your own TX and S-BUS receiver
• Approx 10-minute flight time

Specs:
Type: XK A210 (RTF) T-28 Trojan 4ch RC USAF Military Trainer
Wingspan: 380mm
Length: 325mm
Channels: Ailerons/Elevator/Rudder/Motor/Rates (High-Low)/Gyro Mode Select
Motor: 1020 brushed coreless
Gyro: 6-Axis switchable (fully stabilized mode/3D mode)
Transmitter: 2.4GHz
Servo: 2g micro (ailerons/elevator/rudder)
Range: Approx 150 meters
Battery: 3.7V 400mAh LiPo
Charger: USB type
Flight Time: Approx 10 minutes
Weight: 75g (w/battery)

Includes:
1 x XK A210 (RTF) T-28 Trojan 4ch RC USAF Military Trainer airframe in EPP w/motor, servos, receiver, 6-axis gyro
1 x Clip-in main landing gear & nosewheel
1 x 2.4GHz transmitter
1 x 3.7V 400mAh 25C LiPo battery
1 x USB charger
1 x Tool set
1 x Spare screw set
1 x User Manual

Requires:
4 x "AA" batteries for transmitter