Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

XR Typ B Beechwood 3D / SF Propeller 13x7

XR Typ B Beechwood 3D / SF Propeller 13x7

Discontinued Product

Please continue searching for a similar product.
SKU:
XRIIB13x7
WANT FREE SHIPPING? Click here to find out more!

XR Propeller werden aus importierten deutschen Beechwood gemacht. Digital bearbeitete (CNC) und fertig. Der XR Bereich von Propellern sind gut ausbalanciert und stark und dennoch leicht.
Alle XR sind grundiert und zweimal, um sicherzustellen, eine lange Lebensdauer und brillant glatten Glanz lackiert, die Reibung und Lärm zu reduzieren hilft.

Eigenschaften;
Sehr hohe Festigkeit / Gewichts-Verhältnis.
Erweiterter Knickpunkt Kornausrichtung.
Einzigartige 3D effiziente Krümmung gestaltet.
Wenig Lärm
Eine genaue Balance.

Holen Sie das Beste aus Ihrem Motor heute, erhalten eine XR Stütze!



  • Artikelbezeichnung XRIIB13x7
  • Brand -
  • Gewicht 33.0000
  • Länge 77.00
  • Packaging Width 24.00
  • Höhe 50.00
  • Durchmesser X (Inch ) 13.00
  • Pitch Y (Inch ) 7.00
  • Drehung CCW
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

After hassling customer service for two months because I felt that I got the wrong prop, I was prepared to really pan this prop in a review. I was sent a wooden prop labeled JXZ instead of the XR prop I had hoped to score. I finally gave up and did static tests much to my surprize it tested out to be one of the best props I have ever tested in this size range. Using a Scorpion 4020 motor, a well used turnigy 6s, 4000mah battery, and a Castle Ice controller (with data logging), this prop pulled over 1400w and gave a thrust/watts ratio as good as the best prop I have tested, a Xoar 13x8, and substantially better than most other props 9better than an APC std 13x8, 20 better than Turnigy and APC-e props in 13x8. Moveover, it looks like the hub is thick enough to be used with nitro power. The only hits, the weight at 30 gms is substantially greater than the equivant Xoar (20gms) and a few slight imperfections in the finish.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After hassling customer service for two months because I felt that I got the wrong prop, I was prepared to really pan this prop in a review. I was sent a wooden prop labeled JXZ instead of the XR prop I had hoped to score. I finally gave up and did static tests much to my surprize it tested out to be one of the best props I have ever tested in this size range. Using a Scorpion 4020 motor, a well used turnigy 6s, 4000mah battery, and a Castle Ice controller (with data logging), this prop pulled over 1400w and gave a thrust/watts ratio as good as the best prop I have tested, a Xoar 13x8, and substantially better than most other props 9better than an APC std 13x8, 20 better than Turnigy and APC-e props in 13x8. Moveover, it looks like the hub is thick enough to be used with nitro power. The only hits, the weight at 30 gms is substantially greater than the equivant Xoar (20gms) and a few slight imperfections in the finish.

otima helice , muito bem feita

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

otima helice , muito bem feita

Very nice looking prop. Well balanced and lighte weight (30g).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice looking prop. Well balanced and lighte weight (30g).

high quality prop, works great on my saito72 4 stroke engine. will buy more!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

high quality prop, works great on my saito72 4 stroke engine. will buy more!!!!

Tried this prop on my PA AMR. Good match to 850kv outrunner. Only weighs 29g. Nice finish and even better prop sound on a quiet motor. Centre hole is 5mm and need to be bored to fit onto my collet adapter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tried this prop on my PA AMR. Good match to 850kv outrunner. Only weighs 29g. Nice finish and even better prop sound on a quiet motor. Centre hole is 5mm and need to be bored to fit onto my collet adapter.

This propeller is very well crafted and is very durable. You can use this propeller with your both 2 cycle and 4 cycle glow engines as well as with your powerful electric motors.

Highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This propeller is very well crafted and is very durable. You can use this propeller with your both 2 cycle and 4 cycle glow engines as well as with your powerful electric motors.

Highly recommended.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!