Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Yak 54 1.5m Monster 3D Kit nur V2 EPO

Yak 54 1.5m Monster 3D Kit nur V2 EPO

Discontinued Product

Please continue searching for a similar product.
Gewicht:
4725 g
SKU:
Yak54_59inKit
WANT FREE SHIPPING? Click here to find out more!
Die YAK54 erforderlich, eine große 37-Serie outrunner und 60A ESC. Mit einer Spannweite von 1,5 m und einer Fläche von 43dm2, dann ist es eine riesige 3D-Schaummodell, das zu beeindrucken ist sicher!
Die YAK54 enthält viele hochwertige Details wie Flachpaneelanlagen und Nieten, Cockpit & Pilot, ein Doppelservo (nicht enthalten) gesteuert Aufzug (wie Riesen-Skala), in großem Maßstab Servos (nicht enthalten) für jedes Querruder und eine große mächtige Stütze hängen outrunner (NICHT ENTHALTEN). Der Hauptflügel verfügt über einen großen Kohlenstoff Holm und Schrauben fest zusammen, während sie leicht für den Transport zu entfernen. Die Schwanz Schlitze zusammen in drei Stücke mit zwei Schrauben und Epoxid für einen dringend benötigten extra starken Halt. Die Motorhaube und Motor Detail sind im Schaum (keine eisbehälter Kutte hier) geformt.
Sie haben noch nie ein Schaummodell-Modell dieser Größe und Detail gesehen. Es ist riesig!
Sie erhalten einen 3300mAh 4S Paket ist auch dieses Modell zu fliegen.
Spec.
Spannweite: 1500mm (59in)
Länge: 1210mm (47.6in)
Flügelfläche: 43.9dm2
Flächenbelastung: 50,1 g / dm 2
Fluggewicht: 2400g
Motor: 3740 Brushless Outrunner 700kv (nicht enthalten)
ESC: 60A (nicht enthalten)
Batterie: 3300mAh 14.8V 4S Lipo (nicht enthalten)
Propeller: 14x7
Servos: 17g x 5 (nicht enthalten)
Kanäle: 4 oder 6 mit ail / elev auf 2channel jeder

Erforderlich:
TX & RX
3740 Brushless Outrunner 700kv (nicht enthalten)
60A ESC
17g x 5 Servos
3300mAh 14.8V 4S Lipo
  • Artikelbezeichnung Yak54_59inKit
  • Brand HobbyKing
  • Kapazität ( mAh) -
  • Gewicht ( g) 4725.00
  • Länge 950.00
  • Breite 300.00
  • Höhe 425.00
  • Yak 54 1.5m Monster 3D Kit only V2 EPO
  • Hobbyking Monster Yak-54 3D 1500mm V2 EPO KIT
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

A really well constructed EPO plane. Powered by a Modellhobby Joker 4250-6 840kv - Zippy 4S 4000 Lipo - APC Electric Prop 13x6,5 - YEP 80A ESC - TGY211DMH on elevator and ailerons - TGY210DMH on rudder...... I really like its flight charactristics and awsome design!!!!!! Too sad that you can only get it from Global Warehouse

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A really well constructed EPO plane. Powered by a Modellhobby Joker 4250-6 840kv - Zippy 4S 4000 Lipo - APC Electric Prop 13x6,5 - YEP 80A ESC - TGY211DMH on elevator and ailerons - TGY210DMH on rudder...... I really like its flight charactristics and awsome design!!!!!! Too sad that you can only get it from Global Warehouse

sorry for my english , i just receive my yak and start buidl it ,then i discover a hole in tha tail and another one in the body of the plane ,afther few minutes i discovered that it can be used to renforce the body of the plane by a carbon tube .this hole goes from the tail till the wing ,and afther the wing till the fire mount ,but here, its already glued and closed so we can used it , but you can renforce the body by fill the hole with carbon tube .look very well the tail of the plane you will see it its about 7 or 8mm of diameter .so don't glue it quickly .and for me i will use a 4250 600kv but maybe a 4260 500kv will be better ,i have to try . i just tried with my 4250 kv600 prop 14x7 lipo 4s 4000mah and i just reach 570watt on 34A , which for me is not enough ,so i can conclude that we can use this for acrobatic fly but for 3d its necessary to have a lipo 5s to reach 700 or 800watt .So you can fly with the first combination and learn how you can do with your yak ,but after 10 to 20 fly you have to move to 5s for sure it will be the top , but never try smaller motor you will not have the power request for this plane .On 5s and 800watt we will stay on 38A , which is perfect .



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

sorry for my english , i just receive my yak and start buidl it ,then i discover a hole in tha tail and another one in the body of the plane ,afther few minutes i discovered that it can be used to renforce the body of the plane by a carbon tube .this hole goes from the tail till the wing ,and afther the wing till the fire mount ,but here, its already glued and closed so we can used it , but you can renforce the body by fill the hole with carbon tube .look very well the tail of the plane you will see it its about 7 or 8mm of diameter .so don't glue it quickly .and for me i will use a 4250 600kv but maybe a 4260 500kv will be better ,i have to try . i just tried with my 4250 kv600 prop 14x7 lipo 4s 4000mah and i just reach 570watt on 34A , which for me is not enough ,so i can conclude that we can use this for acrobatic fly but for 3d its necessary to have a lipo 5s to reach 700 or 800watt .So you can fly with the first combination and learn how you can do with your yak ,but after 10 to 20 fly you have to move to 5s for sure it will be the top , but never try smaller motor you will not have the power request for this plane .On 5s and 800watt we will stay on 38A , which is perfect .



After reading through the reviews below I decided to get this model. I built it with Hitec servos, a Turnigy 4240 motor and a 4S battery with 4,000 mAh. Well, it flies but not so well. The cg was way aft even with the large battery but more importantly, the gear is too far aft so it noses over when taxying even with full elevator up.
Had to tilt the gear forward and put quite a bit a lead on the motor bulkhead. Weight is in the range others mention, around 2.4 kg or 5.3 lbs. The canopy fit is very poor, large gap at the rear joint. They didn't even bother putting a magnet back there although the cavity for magnets is in the foam. Will see if my corrections make it fly any better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After reading through the reviews below I decided to get this model. I built it with Hitec servos, a Turnigy 4240 motor and a 4S battery with 4,000 mAh. Well, it flies but not so well. The cg was way aft even with the large battery but more importantly, the gear is too far aft so it noses over when taxying even with full elevator up.
Had to tilt the gear forward and put quite a bit a lead on the motor bulkhead. Weight is in the range others mention, around 2.4 kg or 5.3 lbs. The canopy fit is very poor, large gap at the rear joint. They didn't even bother putting a magnet back there although the cavity for magnets is in the foam. Will see if my corrections make it fly any better.

this plane as a kit is great i bought it and put metal gear hitec servos in it and a 100amp esc with 5055 700kv turnigy air motor with 4cell 3300 40c its awsome with 16x8 apc prop i pull 1250 watts this thing will hover at under half throttle and dose about 70mph this plane was tested by a unamed pro 3d flyer at watts over owatonna it can take whatever you can throw at it but it needs tail weight to hover easier i cant seem to find a replacement cowl as i have damaged mine moving it out of my truck....any help? i dont want to buy a new plane for cowl...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this plane as a kit is great i bought it and put metal gear hitec servos in it and a 100amp esc with 5055 700kv turnigy air motor with 4cell 3300 40c its awsome with 16x8 apc prop i pull 1250 watts this thing will hover at under half throttle and dose about 70mph this plane was tested by a unamed pro 3d flyer at watts over owatonna it can take whatever you can throw at it but it needs tail weight to hover easier i cant seem to find a replacement cowl as i have damaged mine moving it out of my truck....any help? i dont want to buy a new plane for cowl...

, , ))))))

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

, , ))))))

Hoy lo he probado con varias configuraciones pero va perfecto con casi todas:

motor 4260 Kv750, variador 80A, helice 14x7 (serie) lipos:

2x 3s 2650mAh = tira como un demonio. Despega en 2m. sube vertical a menos del 50pcnt. 10 min. vuelo sport.
1x 4s 3700mAh = sigue subiendo vertical pero la bateria sufre un poco cuando aceleras fuerte unos 7 min. vuelo sport.
1x 5s 3700mAh = Casi tan bien como con las dos de 3s aguanta perfectamente y sube vertical al 50pcnt de acelerador. mas de 12 min. vuelo sport.

Recomiendo este tamao de motor pesa bastante y un centro de gravedad perfecto (puse en la bancada un suplemento para adelantar el motor unos 10 mm).

Todas estas pruebas han sido en las mismas condiciones con bastante viento y sin cambiar trim.

Este avion es de otro mundo. El mejor que he visto hasta ahora y su vuelo es noble y facil. Lo recomiendo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hoy lo he probado con varias configuraciones pero va perfecto con casi todas:

motor 4260 Kv750, variador 80A, helice 14x7 (serie) lipos:

2x 3s 2650mAh = tira como un demonio. Despega en 2m. sube vertical a menos del 50pcnt. 10 min. vuelo sport.
1x 4s 3700mAh = sigue subiendo vertical pero la bateria sufre un poco cuando aceleras fuerte unos 7 min. vuelo sport.
1x 5s 3700mAh = Casi tan bien como con las dos de 3s aguanta perfectamente y sube vertical al 50pcnt de acelerador. mas de 12 min. vuelo sport.

Recomiendo este tamao de motor pesa bastante y un centro de gravedad perfecto (puse en la bancada un suplemento para adelantar el motor unos 10 mm).

Todas estas pruebas han sido en las mismas condiciones con bastante viento y sin cambiar trim.

Este avion es de otro mundo. El mejor que he visto hasta ahora y su vuelo es noble y facil. Lo recomiendo

I tried another configuration:



Motor : C5065-380 kv

ESC : 80 A

Lipo : 6S 3300 mAh 25-50C nano-tech

Prop : 15" x 8" 3-blade Graupner

Flight weight : 2780 g

Thrust : 4.6 kg

Curent : 49 A

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I tried another configuration:



Motor : C5065-380 kv

ESC : 80 A

Lipo : 6S 3300 mAh 25-50C nano-tech

Prop : 15" x 8" 3-blade Graupner

Flight weight : 2780 g

Thrust : 4.6 kg

Curent : 49 A

Finally got mine ready to fly. So far I am totally pleased with this kit. Everthing has gone together good, no problems. Let you know how it goes if it's not too cold tomorrow.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Finally got mine ready to fly. So far I am totally pleased with this kit. Everthing has gone together good, no problems. Let you know how it goes if it's not too cold tomorrow.

Admirvel mquina, resitente e com um bonito desing, estilo nico, resposta acrobticas excelentes, bonitas cores, caractersticas aerodinmicas para manobras de preciso, um tamanho admirvel que favorece para voos mais tranquilos e calmos, fiquei extremamente satisfeito pelo preo e frete sugerido, agradeo a promoo, indico a mquina, agradvel e bonita!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Admirvel mquina, resitente e com um bonito desing, estilo nico, resposta acrobticas excelentes, bonitas cores, caractersticas aerodinmicas para manobras de preciso, um tamanho admirvel que favorece para voos mais tranquilos e calmos, fiquei extremamente satisfeito pelo preo e frete sugerido, agradeo a promoo, indico a mquina, agradvel e bonita!!!

this plane is excellent beautiful to fly as a trainer or full 3D handles like a dream first flight was excellent and smooth

for this plane if you wish to fly full 3D i recommend the turnigy sk3 620kv motor with the turnigy plush 80hv esc 14x8 prop and a 5s 30c 3300mah battery

this plane is great value for money and i highly recommend it how ever there are a small few bad points the landing gear is crap i bought carbon landing gear from hk for it also if you do not have a futaba radio you will need a servo reverser as you need to run 2 servos on your elevators if you do not have a servo reverser and no futaba radio your elevator will work like your alerons on the subject of servos i recommend not to use mini 18g servos i used full size servos and cut out the slot to fit them

if you buy this plane and make a small few adjustments you will love it and not regret buying it

thanks hk

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this plane is excellent beautiful to fly as a trainer or full 3D handles like a dream first flight was excellent and smooth

for this plane if you wish to fly full 3D i recommend the turnigy sk3 620kv motor with the turnigy plush 80hv esc 14x8 prop and a 5s 30c 3300mah battery

this plane is great value for money and i highly recommend it how ever there are a small few bad points the landing gear is crap i bought carbon landing gear from hk for it also if you do not have a futaba radio you will need a servo reverser as you need to run 2 servos on your elevators if you do not have a servo reverser and no futaba radio your elevator will work like your alerons on the subject of servos i recommend not to use mini 18g servos i used full size servos and cut out the slot to fit them

if you buy this plane and make a small few adjustments you will love it and not regret buying it

thanks hk

  1. 1
  2. 2
  3. 3
Customer files
TUBE BIT 500MM Download [1551]
PUSH RODS STRAIGHT ONES Download [601]
New Manual (2017) Download [6]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!