Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

YAK54 EVP 3D Profil KIT (35.4in)

YAK54 EVP 3D Profil KIT (35.4in)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1158 g
SKU:
Yak54-Kit-EPP
Product
Description
Die Yak54 aus Super Tuff EPP-Schaum machte es das perfekte Flugzeug für das Lernen oder Üben 3D-Kunstflug zu machen. Das einfache Design macht es schnell und einfach in wenigen Minuten zu bauen. Die Yak54 EVP 3D enthält auch eine ausführliche Bedienungsanleitung und alle Hardware (Schubstangen, Hupen usw.) erforderlich zu beenden.
Sie werden 4 x 9g Servos benötigen, 20 ~ 30amp ESC, 22 Größe Brushless Motor um 1400kv, 11.1v 3S Lipo um 800 bis 1300mAh und Ihren eigenen Sender und Empfänger (Tx / Rx), dieses Modell zu vervollständigen.
Spec.
Rumpflänge: 925mm
Spannweite: 900 mm
Fluggewicht: 380 - 470g (mit Batterie)
Erforderlich:
Motor: 22xx Größe ~ 1400kv
ESC: 20 ~ 30 Amp
Servos: 4 x 9g
Akku: 11.1V 800 ~ 1300mAh 20c Lipo
Ihre eigene Tx / Rx
Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    Yak54-Kit-EPP
  • Brand:
    Nein
  • Kapazität ( mAh)
    Nein
  • Gewicht ( g)
    1158.00
  • Länge:
    950.00
  • Breite:
    65.00
  • Höhe
    275.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
great little plane. Replacing my Great Planes EP Yak 55 3D
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a remarkable airplane. I used a l2210a motor and a 9.5 prop trimmed down on the cord to lower the amp output a bit. I extended the ailerons about 1.1/4". I use metal gear servos , 1000mah batteries and no landing gear . Will do anything . Hover , blenders harriers . punch out with vigor. Or super slow high alpha. Best performance is with low or no wind .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awsome plane, flies superb, don`t bother with dual rates just max throws on all control surfaces. People are saying one control rod is to short, not the case if you connect furthest back servo to rudder and other to elevator they fit fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super als Funflyer. Mit ein paar Leds auch in der Nacht spassig zu fliegen. Qualitt ok.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I cannot imagine a higher quality airplane available for the price. Fast shipping and a faster build. Nice and light. Top quality hardware too. Balanced easily per the instructions. First flights tomorrow. Expect it to live up to the Sbach, Hummer and Reakter.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I love this little plane, it is easy to build, flying it is good for its size, very stable and can fly slow too. Good for learning 3D. I use 2200 MAh battery, but i had to mod it a little by cutting new battery mount on the front top of plane (good CG too) and used cutted EPO to close original battery mount behind the motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great plane to build and fly - for learning 3D. it is small but still very stable and it can fly slow too. i just love it...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
just had first maiden flight today, great plane and kit really is top class for under 30. only one complaint is that all four metal linkage wires are the same lenght and one to a bit short so had to cut my own. But still 5/5
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
4xHXT900, dLux30A ESC, Turnigy 2830-11 1000kv, SF 10x4,7 (19A static) ORx400,
3s 1000 - 1300 == 505 - 520gr
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have owned this plane for a couple of years now and its been through hell and back. Very strong will take alot of abuse, even if you manage to break it, hot glue fixes just about everything. I have had several setups on this and eventually settled on a heavier setup. Hobbyking 30A ESC and a big NTM 35-30 1400KV motor turning a 9X6 Prop (approx 270W). I ended up shifting the receiver to the battery slot at front and cut out the receiver hole larger to support larger batteries. Battery sits very close to cg spot and changes in weight dont affect cg much. I usually use turnigy nanotech 1000mah 3 cell, pulls about 24amp and get about 3.5 to 4 min flights. I have also fitted leds for night flying and usually use 1500mah for that or in heavy winds. After a while I noticed my fuselage had flex in it, fixed it by regluing cf rods in fuselage while holding flat on table. On this setup I have lots of power and motor comes down cool even in hot weather, can fly battery after battery after battery no probs, esc gets luke warm on hot days. For the price brillant plane, very capable 3D flyer but prob not extreme 3d. I find mine hard to hold in hover and very pitchy when upside down, prob my big motor isnt helping, lol. Not really for a learner but if you tamed down controls prob make good 2nd or 3rd plane. Great plane to learn 3d with.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.