Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Z700-V2 Quadcopter Rahmen Weiß / Rot mit Krabben Fahrwerk (700 mm) V2

Z700-V2 Quadcopter Rahmen Weiß / Rot mit Krabben Fahrwerk (700 mm) V2

Discontinued Product

Please continue searching for a similar product.
SKU:
450000065-0
WANT FREE SHIPPING? Click here to find out more!

Die Z700-V2 ist ein super-sized und gut 700mm Quad Rahmen aus hochwertigen Materialien gebaut dacht. Der Hauptrahmen ist Glasfaser während die Arme aus extrem haltbaren Polyamid Nylon hergestellt sind.

Die Montage ist ein Kinderspiel mit vorgeGewindeMessingHülsen für alle der Rahmenbolzen, so sind keine Kontermuttern erforderlich. Ein großartiges Feature dieses Rahmens ist die großen Laschen an der Vorder- und Rückseite des Hauptrahmens Bodenplatte für die Montage Kameras oder andere Zubehörteile anbringen. Dies sorgt für eine gute Möglichkeit, Luft Video zu nehmen oder FPV fliegen, ohne dass irgendwelche zusätzlichen Befestigungswinkel hinzuzufügen.

Die Z700 verfügt auch über farbige Arme (2 weiße und 2 rote), die für die Orientierung groß sind. Es hilft zu halten Sie die richtige Richtung, ohne die Notwendigkeit für verschiedene farbige Stützen fliegen.

Das Z700 enthält einen Hallo-Leg Crab Stil Fahrwerk setzen und einen Haken und Stange Halterung. Wir bieten eine vollständige Palette von Multi-Rotorelektronik wie Multirotor-Steuerplatine, ESC & Motoren. Es war noch nie so einfach und erschwinglich ein Quad in die Luft zu bekommen!

Eigenschaften:
• Integrierte von Qualität Glasfaser und Polyamid Nylon.
• Pre-Gewindemessinghülsen für alle der Rahmenbolzen.
• Farbige Arme zur Orientierung, um Sie in die richtige Richtung fliegen.
• Hallo-Leg Crab Stil Fahrwerk
• Haken und Stange Montageoptionen
• Große Montagelaschen am Hauptrahmen Bodenplatte für einfache Kameramontage.
• Einfache Montage.

Specs:
Breite: 700mm
Höhe: 58mm w / o Hundegang 258mm mit Hundegang
Gewicht: 570g (w / eingeschlossen Crab hallo-Lift Gang)
Motor Mount Bolzenlöcher: 16 / 19mm
H
ook Rod Bahn: 55-60mm Mitte zu Mitte 12 mm Stange (11.75mm)

  • Artikelbezeichnung 450000065-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 825.0000
  • Länge 320.00
  • Packaging Width 65.00
  • Höhe 215.00
  • Z700v-2
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

First off, as quadcopter frames go and as the title suggests, this frame is enormous. For that reason, I have given this frame a slightly better score than I should have since it does come with a few errors. The brass sleeves for the screws are slightly covered by plastic and you have to spend a bit of time removing it. The motor mounting holes are irregular and you may need a few extra screws and some adapters to attach your motors. This aside however, I was surprised that my 2kg quad didn't buckle at the arm joints and fall to the ground in spectacular fashion. In fact, it flew almost perfectly first flight with an ardupilot controller. This frame is perfect if you're aiming to build for cinematography, photography (since the included crab legs are a plus) and if you just want to fly a huge quad. Good luck!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First off, as quadcopter frames go and as the title suggests, this frame is enormous. For that reason, I have given this frame a slightly better score than I should have since it does come with a few errors. The brass sleeves for the screws are slightly covered by plastic and you have to spend a bit of time removing it. The motor mounting holes are irregular and you may need a few extra screws and some adapters to attach your motors. This aside however, I was surprised that my 2kg quad didn't buckle at the arm joints and fall to the ground in spectacular fashion. In fact, it flew almost perfectly first flight with an ardupilot controller. This frame is perfect if you're aiming to build for cinematography, photography (since the included crab legs are a plus) and if you just want to fly a huge quad. Good luck!

Just as others have stated the arms are to flexible. I was having problems with stability and the quad wanting to twist to the right no matter what I did. I ordered the Upswept Upgrade Arms for DJI Flamewheel Style Multirotors V500 / H550 (Blue) (2pcs), installed them and all my problems disapeared so if you want wide center frame plates you can buy this but count on doing something to apgrade the weak flexible arms

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just as others have stated the arms are to flexible. I was having problems with stability and the quad wanting to twist to the right no matter what I did. I ordered the Upswept Upgrade Arms for DJI Flamewheel Style Multirotors V500 / H550 (Blue) (2pcs), installed them and all my problems disapeared so if you want wide center frame plates you can buy this but count on doing something to apgrade the weak flexible arms

gran i facil de veure a l'aire. espai de sobres per ficar una apm 2.6 amb tota la trasteria. osd, gps etc. fora estable i facil de monta. els braos flexan bastant pero en vol va fora be.
motors 2830 amb pala 9x4, variadors de 40amp i bateries 3s 5200mha. un dron mes que funciona

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

gran i facil de veure a l'aire. espai de sobres per ficar una apm 2.6 amb tota la trasteria. osd, gps etc. fora estable i facil de monta. els braos flexan bastant pero en vol va fora be.
motors 2830 amb pala 9x4, variadors de 40amp i bateries 3s 5200mha. un dron mes que funciona

There's been a lot of complaints about the flexible arms, and I have a solution. Lightly sand the outer sides so epoxy will adhere, then epoxy carbon fiber strips on both sides of the arms. This will stiffen the arms enough to allow for stable flight. Steve

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There's been a lot of complaints about the flexible arms, and I have a solution. Lightly sand the outer sides so epoxy will adhere, then epoxy carbon fiber strips on both sides of the arms. This will stiffen the arms enough to allow for stable flight. Steve

The arms flex way too much. Lots of vibration. The center section is fine, lots of room, good construction. Stiffen up the arms and it will be fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The arms flex way too much. Lots of vibration. The center section is fine, lots of room, good construction. Stiffen up the arms and it will be fine.

Does not fly well at all. Excessive arm flex creates huge instability problems. Unsuitable for fun flying to say nothing of using it for a video platform. FORGET this platform and look for something else.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Does not fly well at all. Excessive arm flex creates huge instability problems. Unsuitable for fun flying to say nothing of using it for a video platform. FORGET this platform and look for something else.

OK I wanted to go bigger than my F450 Quad so I decided to give this a try even though a few people have said there was too much arm flex. Anyway after putting it all together the first flight was smooth but Quad rotated right and needed left rudder to correct. I went through the quad again after posting for help in a few places and 1 arm may have been twisted enough to cause the problem because after slightly bending it after heating it and letting it cool down may have fixed it ( also went through my KK2.1.5 again and verified everything again it fly perfectly. Yes the arms have flex but I can deal with it. The landing gear could be better & I may swap it out or add to it to strengthen them maybe even add a battery holder to each side some how. I am using some cheap 800kv motors with 12.4.5 props to start with as I'm a novice then go to carbon fiber ones eventually. I am also running a EMAX 25amp 4in1 ESC in the quad as well as my F450 without issue. I have set this up for FPV and have Built my own Ground station and will post some videos of it soon.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OK I wanted to go bigger than my F450 Quad so I decided to give this a try even though a few people have said there was too much arm flex. Anyway after putting it all together the first flight was smooth but Quad rotated right and needed left rudder to correct. I went through the quad again after posting for help in a few places and 1 arm may have been twisted enough to cause the problem because after slightly bending it after heating it and letting it cool down may have fixed it ( also went through my KK2.1.5 again and verified everything again it fly perfectly. Yes the arms have flex but I can deal with it. The landing gear could be better & I may swap it out or add to it to strengthen them maybe even add a battery holder to each side some how. I am using some cheap 800kv motors with 12.4.5 props to start with as I'm a novice then go to carbon fiber ones eventually. I am also running a EMAX 25amp 4in1 ESC in the quad as well as my F450 without issue. I have set this up for FPV and have Built my own Ground station and will post some videos of it soon.

This frame is not rigid and it vibrate with low KV motor and big propeller. In my case I have try it with 12 prop. Too much vibrations! The arms distords.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This frame is not rigid and it vibrate with low KV motor and big propeller. In my case I have try it with 12 prop. Too much vibrations! The arms distords.

For me, It wont fly properly, the arm flex to much creating an unstable craft, it look like the KK2 is always figthing no mater what setting, same goes for the Naze32. I have swap everything to confirm my stating, motor, ESC and board. I have tried everything else. the only way to resolve that where to install smaller and stronger (450) arm. My 3 stars goes to the frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For me, It wont fly properly, the arm flex to much creating an unstable craft, it look like the KK2 is always figthing no mater what setting, same goes for the Naze32. I have swap everything to confirm my stating, motor, ESC and board. I have tried everything else. the only way to resolve that where to install smaller and stronger (450) arm. My 3 stars goes to the frame.

The arms are very weak and flexible. It can not even hold motors. When used with landing skid, arms become curved because of the motor weight. In addition, during flight, it sometimes shakes because of flexible arms. May be good with 22/28 size 0945 size props, where the shaking force is low.
Instead of this frame, you may choose another Hobbyking product; whose arms seem more rigid: http://www.hobbyking.com/hobbyking/store/__56209__Q680_V3_Glass_Fiber_Quadcopter_Frame_680mm_Integrated_PCB_Version.html

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The arms are very weak and flexible. It can not even hold motors. When used with landing skid, arms become curved because of the motor weight. In addition, during flight, it sometimes shakes because of flexible arms. May be good with 22/28 size 0945 size props, where the shaking force is low.
Instead of this frame, you may choose another Hobbyking product; whose arms seem more rigid: http://www.hobbyking.com/hobbyking/store/__56209__Q680_V3_Glass_Fiber_Quadcopter_Frame_680mm_Integrated_PCB_Version.html

  1. 1
  2. 2
Customer files
DoesnotfitDeadCat.JPG Download [2025]
11.87mm Rods instead of 10mm Download [204]
Tarot 2d Gimbal Crab Clips don't fit Download [221]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save