Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

ZERO 850mm (ARF)

ZERO 850mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
Z502-KIT
WANT FREE SHIPPING? Click here to find out more!
Die Zero war ein Schock für die Piloten der Alliierten Kämpfer , als erste in den frühen Tagen des Krieges im Pazifik angetroffen, die Skys damit die Geschwindigkeit, leichte Design und die schwere Ausrüstung zu dominieren. Die Zero tödlich in Nahkämpfen bewiesen , bis es schließlich durch überlegene neue Kämpfer und eine Änderung der Taktik von alliierten Kampfpiloten überwunden wurde.

Dieser große schau Parkfly Modell fängt den Geist des Null mit seinen Maßstab Umriss und bereits aufgetragener Lack matt. Sie werden
mit einem bürstenlosen Motor Glocke um 1300kv für Kämpfer wie Flugleistung und 3 x 9g Servos benötigen die Null wie enge Kurven zu handhaben . Sie haben die Möglichkeit , Start Unterwagen oder Hand fixiert.
 
Spec.
Spannweite: 850 mm
Flügelfläche: 13.6dm2
Länge: 705mm
Fliegen Gewicht: 340g ~ 375g
Motor: 1300kv Brushless Outrunner (Erforderlich)
ESC: 20A (Erforderlich)
Servos: 3x9g (Erforderlich)

Eingeschlossen sind:
Kleben
Werkzeuge
2 x Propeller
Decal Sheet
 
Erforderlich:
Motor: 1300kv Brushless Outrunner
ESC: 20A
Servos: 3x9g
Ihre eigene 4
- Kanal - TX & RX
7,4V 1000mAh 2s ~ 1300mAh 2s Lipo
  • Artikelbezeichnung Z502-KIT
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 1761.0000
  • Länge 1000.00
  • Packaging Width 175.00
  • Höhe 300.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Like most guanli kits, the finish of this frame is poor and the hard foam break easyly. But once in the air, it fly very well, able to very slow or high speed and very responsive. I like it a lot.
my setup; Emax motor 28-12 1534kv (Produit ID: FC2812) with stock 8x6 propeller, a turnigy 20a esc, 3 tg9e servos and a zippy compact 3s 1000 25c. I reinforced the motor hub with checkered tape for strenght during landing and fixed with velcro 2 old AA batteries in the nose to balance the plane.
This setup is cheap and good. the motor is powerfull and give a incredible climbing rate and top speed. The frame is very stable at slow and high speed, stall is preventive and aerobatics are very easy. I recommend to fly without wheels.
And at this price, you can buy 5 and play kamikaze on hobby boats :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Like most guanli kits, the finish of this frame is poor and the hard foam break easyly. But once in the air, it fly very well, able to very slow or high speed and very responsive. I like it a lot.
my setup; Emax motor 28-12 1534kv (Produit ID: FC2812) with stock 8x6 propeller, a turnigy 20a esc, 3 tg9e servos and a zippy compact 3s 1000 25c. I reinforced the motor hub with checkered tape for strenght during landing and fixed with velcro 2 old AA batteries in the nose to balance the plane.
This setup is cheap and good. the motor is powerfull and give a incredible climbing rate and top speed. The frame is very stable at slow and high speed, stall is preventive and aerobatics are very easy. I recommend to fly without wheels.
And at this price, you can buy 5 and play kamikaze on hobby boats :)

To set up the plane correctly you get a lot of good tips by looking up the GWS Zero, this plane is a gws clone.
I run it on 3 cell 1300 amp, 1400 kv outrunner and a 7x4 prop. You need a lot of ballast in the front to get the cg right and some downthrust, otherwise it will rise the nose like a balloon under power.
The foam is fragile and the landing gear to weak so you should do something about that.
But now my zero flies great, is easy to land and very stable even in slow speed.
For the money a very nice warbird but i don't recommended it for beginners

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

To set up the plane correctly you get a lot of good tips by looking up the GWS Zero, this plane is a gws clone.
I run it on 3 cell 1300 amp, 1400 kv outrunner and a 7x4 prop. You need a lot of ballast in the front to get the cg right and some downthrust, otherwise it will rise the nose like a balloon under power.
The foam is fragile and the landing gear to weak so you should do something about that.
But now my zero flies great, is easy to land and very stable even in slow speed.
For the money a very nice warbird but i don't recommended it for beginners

It`s cheap and nasty rubbish. I wasn`t expecting something great but it was a lot worse than i expected...too many fault`s to go on and on about it. Should be $45 including free freight and the warning that it will need a lot of work to correct faults, redo hinges,repaint after a lot of sanding, straighten major parts etc.....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It`s cheap and nasty rubbish. I wasn`t expecting something great but it was a lot worse than i expected...too many fault`s to go on and on about it. Should be $45 including free freight and the warning that it will need a lot of work to correct faults, redo hinges,repaint after a lot of sanding, straighten major parts etc.....

The model is tail heavy and will give you a wild ride until you get the CG well forward. I use a 3s 1300mah battery set right forward, and added fishing sinkers until it balanced 6 cm from the leading edge. I use a 10" slow fly prop, and increased the area of the tailfin by 60pcnt with soft 5mm balsa. I fly the plane as ailerons only, no rudder. Total weight is 540 grams, but it glides quite well, no power needed for landings. The Zero is now a really sweet flier - this and the Hellcat are the best flying warbirds I have had so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The model is tail heavy and will give you a wild ride until you get the CG well forward. I use a 3s 1300mah battery set right forward, and added fishing sinkers until it balanced 6 cm from the leading edge. I use a 10" slow fly prop, and increased the area of the tailfin by 60pcnt with soft 5mm balsa. I fly the plane as ailerons only, no rudder. Total weight is 540 grams, but it glides quite well, no power needed for landings. The Zero is now a really sweet flier - this and the Hellcat are the best flying warbirds I have had so far.

Recht solides Modell wenn man von der Plastikabdeckung vorn absieht.
Allerdings fliegt sich die Zero sehr unruhig in der von HK empfohlenen Konfiguration.
Neben 45g Blei in der Nase musste ich noch einen Orange RX mit Stabilisator einbauen und verwende einen Turnigy nano-tech 950mah 3S Lipo um ein vernnftiges Flugverhalten zu bekommen!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Recht solides Modell wenn man von der Plastikabdeckung vorn absieht.
Allerdings fliegt sich die Zero sehr unruhig in der von HK empfohlenen Konfiguration.
Neben 45g Blei in der Nase musste ich noch einen Orange RX mit Stabilisator einbauen und verwende einen Turnigy nano-tech 950mah 3S Lipo um ein vernnftiges Flugverhalten zu bekommen!

its a shame there is no pnf version for this plane, i had to install a motor and have to do a lot of modification and i ruined it, but when you find the perfect motor and adjust it for a little down thrust it flies great! be carfull the tail is too havey

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

its a shame there is no pnf version for this plane, i had to install a motor and have to do a lot of modification and i ruined it, but when you find the perfect motor and adjust it for a little down thrust it flies great! be carfull the tail is too havey

Fly's well, used an 1500 KV bell and the props delivered with the plane, on 2S lipo 2Ah and with the CG on exactly 6.5cm from leading edge, you need the wheight in the nose.
With the CG on 6cm from leading edge it fly's a little slugish.
Total flying wheight is 451 grams, set the elevator on 4mm up and 4mm down, trust me it is more than enough, roll and rudder as much as possible., about 1cm up and 1cm down, rudder 2cm to the right and also to the left 2cm.
Set the down trust on 2 dgr and the side trust on 3 dgr right.
It will fly very slowly without getting nervous.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fly's well, used an 1500 KV bell and the props delivered with the plane, on 2S lipo 2Ah and with the CG on exactly 6.5cm from leading edge, you need the wheight in the nose.
With the CG on 6cm from leading edge it fly's a little slugish.
Total flying wheight is 451 grams, set the elevator on 4mm up and 4mm down, trust me it is more than enough, roll and rudder as much as possible., about 1cm up and 1cm down, rudder 2cm to the right and also to the left 2cm.
Set the down trust on 2 dgr and the side trust on 3 dgr right.
It will fly very slowly without getting nervous.


First off, the Zero I received was very tail heavy. I needed to add about 150 grams of ballast to get the Center of Gravity (CoG) correct. Also, the elevator control design is very poor. The bar that connects the two elevators has too much slop leading to uneven elevator travels of the two surfaces. I pulled out the existing elevator rod and control horn and replaced it with two rods, one for each elevator (left and right) as well as clevis-type control horns. I used the recommended 1300 kV bell motor, an HK 20A ESC, and three Corona C-DS-929MG servos.

With the above stated equipment and modifications, this plane flies beautifully! Plenty of power and responsiveness. I set the aileron dual rates very low (40pcnt) for scale flying. Hammerheads and loops are a breeze. Love the sound of the motor, a kind of low-pitched drone - very realistic. The fuselage and wing are made of sturdy high density foam and should last many flights. I am very happy with my purchase, even if some unplanned work was needed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:


First off, the Zero I received was very tail heavy. I needed to add about 150 grams of ballast to get the Center of Gravity (CoG) correct. Also, the elevator control design is very poor. The bar that connects the two elevators has too much slop leading to uneven elevator travels of the two surfaces. I pulled out the existing elevator rod and control horn and replaced it with two rods, one for each elevator (left and right) as well as clevis-type control horns. I used the recommended 1300 kV bell motor, an HK 20A ESC, and three Corona C-DS-929MG servos.

With the above stated equipment and modifications, this plane flies beautifully! Plenty of power and responsiveness. I set the aileron dual rates very low (40pcnt) for scale flying. Hammerheads and loops are a breeze. Love the sound of the motor, a kind of low-pitched drone - very realistic. The fuselage and wing are made of sturdy high density foam and should last many flights. I am very happy with my purchase, even if some unplanned work was needed.

You need to be a bit inovative to fit a brushless motor into this. I fitted a 2822 motor , 8x4 prop, and run 1000ma 3s battery. I had to add about 30 gram sinker into the engine cowl to balance, but it does fly very well, albeit not such a good glider, and needs to be landed pretty well under a bit of power. Very nicely finished model, and you can't go wrong for this price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

You need to be a bit inovative to fit a brushless motor into this. I fitted a 2822 motor , 8x4 prop, and run 1000ma 3s battery. I had to add about 30 gram sinker into the engine cowl to balance, but it does fly very well, albeit not such a good glider, and needs to be landed pretty well under a bit of power. Very nicely finished model, and you can't go wrong for this price.

nice model, best value for the price. it flyes great whit correct setup. I use a 1100 kv outrunner brushless motor whit a 9x47 prop and a 20amp esc.

She climbs vert all time, lopps and roll very quickly, never underpowered. Use 1300 /1500 3s lipo and with 1300 lipo she flyes at full speed for 8 minutes, using medium gas power flyes almost 20 minutes. putted 30 gms on nose to have correct COG.

i'm very happty.

look a the video I did in video section.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice model, best value for the price. it flyes great whit correct setup. I use a 1100 kv outrunner brushless motor whit a 9x47 prop and a 20amp esc.

She climbs vert all time, lopps and roll very quickly, never underpowered. Use 1300 /1500 3s lipo and with 1300 lipo she flyes at full speed for 8 minutes, using medium gas power flyes almost 20 minutes. putted 30 gms on nose to have correct COG.

i'm very happty.

look a the video I did in video section.

  1. 1
  2. 2
Customer files
ivanbr Zero F Download [290]
ivanbr Zero F 1 Download [249]
ivanbr Zero F 3 Download [257]
ivanbr Zero F 4 Download [290]
ivanbr Zero F 5 Download [373]
manual zero 850mm 2/2 Download [429]
manual zero 850mm 1/2 Download [434]
Zero colour scheme Download [380]
Zero3 Download [28]
striped the paint w/3536 910 kv motor, g Download [3840]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!