DYS D800 X8 Professional Multi-Rotor Aerial Photography And Heavy Lift Platform (PNF)

The DYS D800 series is an ultra-high quality variation on the more usual multirotor frames with a compliment of class-leading features that give this range unrivalled capability.

The D800 X-8 comes prebuilt from high quality metal and carbon fiber components simply leaving you to add your choice of flight controller and camera package to make up your professional standard aerial video platform.

The center frame has twin battery support platforms, provisions for your FPV equipment and an integrated power distribution board which is supplied ready-wired and features PWM signal support to the flight controller. It also supports the aluminum, CNC machined housing of the screw type retractable landing gear on the lower plate.

One of the more surprising features of this multirotor is the speed with which it can be assembled and broken down again; the quick release arms making on-site assembly simple and the gold plated contacts ensure a long lasting, secure interface with the main body of the D800 X-8. These arms are fully removable in contrast to the more commonly seen foldable types, allowing this 800mm multirotor to be packed into a 430 X 300 x 200mm box for transportation. 

The D800 X-8 comes pre-assembled with 4114 400kv motors, 40A HV ESC’s, Electric screw type retracts and is ready for you to install your flight controller.

The DYS D800 X-8 is a ground breaking multirotor platform capable of carrying your DSLR camera setup with ease and a must  for anyone looking to upgrade to pro level.

Features:
• Quick assembly/breakdown for easy transport or deployment
• Gold Plated self-aligning connections with cam lock quick release O-ring sealed arms
• Pre-built and ready for your flight controller and camera package
• 4114 400KV motors & 40A HV ESC’s pre fitted and configured
• Electric screw type retractable landing gear
• All metal and carbon construction
• 430 x 300 x 200mm packed size

Specs:
Frame: D800 X-8
Wheelbase: 800mm
Motor: BE4114/400KV
ESE: HV40A
Propeller: 1555
Landing gear: Retractable screw type
Total weight of frame: 2.8KG (including motors, ESCs and Propellers, without battery)
Battery: 22.2V (6s) LiPoly >6000 mAh
Flight time: 12min +
Maximum payload: 6.5KG

Included:
D800 X-8 frame
8 x 4114 400kv motors pre-installed
8 x 40A HV ESC pre-installed
Electronic retractable landing gear
8 x 15x5.5 carbon props
PDB and retract manager

Required:
Flight controller
6 Channel (min) R/C system
6s LiPoly flight battery (6000 mAh min)
Charger