The camera uses a quality glass lensed SONY CCD system.
1 x SONY CCD 1/3inch Camera
1 x Wiring Loom1 x Lens cap
Camera spec.Image device: 1/3-inch Sony super HAD color CCD
Pixel: 752 x 582(NTSC)
Synchronization: Internal synchronization
Horizontal resolution: 520TV Lines
Minimum Illumination: 0.1Lux/F1.2
S/N Ratio: Greater than 48dB(AGC OFF/B/W OFF)
White balance: Auto Tracking White Balance
Auto backlight compensation: On/OFF switchableLens: 3.6-6mm
Input voltage: DC12V
Electric current: 80MA±5MA
Electronic Shutter: Auto
PAL: 1/50 to 1/100,000 seconds
Video output: 1.0Vp~p75Ω
Operation Temp.: -10~+50?
Size: 38 x 38
Power supply: 12V/150mA
I received this camera and the picture is great, not as good as 600TVL but acceptable for FPV. I give 3 stars due to the Red and White wires being wired incorrectly. See files tab for correct wiring. Luckily I didn't fry the camera with the backwards wiring.Using that for my TBS Disco. Had to switch the wires to get working. Otherwise - pretty good camera.Very good image quality for the price. Overall good product. It would be nice if HK sold a case for it. To protect the electronics, I started putting hot glue on the circuit board. Its better than nothing.Great little camera for the price. Very good picture quality and good low light performance.Aplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusqweqwwewegood camera for the money, wish the board could be smaller.This camera is great! It has a fantastic image with plenty of saturation. I currently have it on my RiteWing Zypher ZII and there is no noticeable delay in the camera feed which makes for a great flying experience. I have however removed the plug and instead soldered the wires directly into the back of the camera, because the way I was mounting it put a lot of strain on the plug. I would recommend it to anyone!Pretty good camera. I've upgraded mine with a larger FOV lense. With there was better documentaion with this, as I think there are onboard settings, but nothing to tell you how to use them.Very nice camera. It's a lot clearer than I pictured. Simple to hook up, glad it's 12v, and fits the pan-tilt mount perfectly.Received mine in early February 2013. The connector was wired correctly from the factory. Works great!
A little awkward to mount given its shape and exposed IC board, but no biggie for anyone already used to scratchbuilding and/or FPVing