BSR Berserker 1/8 Electric Truggy (Kit)
BSR Berserker 1/8 Electric Truggy (Kit)
Copy and Share the Below URL
The Berserker 1/8 Truggy is for those who like driving on the edge of sensible and it has been built tough and reliable to make sure you can stay there. When we were developing this truggy our brief was for a truggy that was out of the box faster than anything we have made before and capable of doing that time and time again. From the chasiss, to the suspension, to the power system and even it's distinctive yellow and black painted polycarbonate shell, nothing has been overlooked to ensure it is the best available.
The Berserker is packed full of features that will leave the others for dead. To start with there is a solid aluminum chassis with aluminum front and rear shock towers to keep everything aligned and stable. High quality, big bore, oil filled shocks are used for the performance and handling you would expect in a high end race truggy. The sealed radio box keeps your receiver safe from any knocks and the huge soft square pin tires are a great balance of performance to keep you moving over most surfaces from rocky trails to paved roads.
One of the most exciting features of this truggy is that it comes setup for use with 3S or 4S batteries but if you want more speed then you can change out the 46T diff and pinion gear and replace it with the 49T diff and 12T pinion gear included in the box that is designed to run with 6S batteries to get the Berserker really screaming. Don't be fooled though, the Breserker is plenty fast enough on 3S for most drivers, exciting on 4S and...BERSERK on 6S.
This is NOT a kit of parts it is a partially built model, it is designed for people who want to add their own electronics.
The Berserker is simply the most exciting wheeled vehicle we have ever sold and we know you will feel the same when yours arrives and you get out there and break the rules.
A full set of parts can be found here.
Features:
• Stylish polycarbonate shell
• Hardened alloy shock bodies, chassis braces, drive shafts with steel spur gear
• Full-time 4WD system
• Low center of gravity chassis design
• Large square pind tyres for grip on most surfaces
• Big Bore Aluminum Shocks
• 3.5mm Aluminum Chassis
• Steel Diffs
• Standard Diff for 4S installed, Also included Diff for 6S use
Specs:
Battery tray: 145 x 54mm
Length: 530mm
Width: 410mm
Height: 205mm
Wheelbase: 370mm
Ground Clearance: 50mm
Wheel size: 145x80mm
Wheel hex: 17mm
Drive Train: Full-Time 4WD
Required:
1 x 4~6S 4500mAh 30-40C LiPo Battery
1 x 4082 1450KV Electric Motor
1 x 150A Brushless ESC
1 x High Torque Servo
1 x LiPo Battery Charger
1 x 2 Channel wheel style Radio TX/RX system
-
BSR Berserker 1/8 Electric Truggy -
BSR Berserker 1/8 Electric Truggy
-
BSR Berserker 1/8 Electric Truggy
-
BSR Berserker 1/8 Electric Truggy
-
BSR Berserker 1/8 Electric Truggy
-
BSR Berserker 1/8 Electric Truggy
-
Bsr Basher Berserker Hobbyking 1/8 brushless truggy unboxing
RUGRAFF | Verified Buyer
-
Overall
-
Quality
-
Value
Berserker is one of the top rc 1/8 cars!!
Mar 17, 2017
Frank | Verified Buyer
-
Overall
-
Quality
-
Value
It's Ok, if they fixed a few things it would be great
Mar 08, 2017
Tyler | Verified Buyer
-
Overall
-
Quality
-
Value
Very nice Truggy
Jan 25, 2017
mark | Verified Buyer
-
Overall
-
Quality
-
Value
Awesome Truggy absolute value for money
Jan 15, 2017
Jean-Paul | Verified Buyer
-
Overall
-
Quality
-
Value
Fun !
Dec 29, 2016
| Download [12] | |
| Almost finished | Download [1] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!
Accessories
Special Price $3.46
You save $1.67
Was $5.13
Special Price $1.72
You save $0.84
Was $2.56
Special Price $1.72
You save $0.84
Was $2.56
Special Price $1.29
You save $0.67
Was $1.96
Special Price $2.59
You save $1.17
Was $3.76
Special Price $1.72
You save $0.84
Was $2.56
Special Price $1.72
You save $0.84
Was $2.56
Special Price $0.86
You save $0.51
Was $1.37
