New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

2.4Ghz SuperMicro Systems - Receiver, ESC and 2 x Linear Servos All-in-one (5ch)

2.4Ghz SuperMicro Systems - Receiver, ESC and 2 x Linear Servos All-in-one (5ch)

Discontinued Product

Please continue searching for a similar product.
SKU:
HK0104ARX-L
WANT FREE SHIPPING? Click here to find out more!

The 2.4ghz SuperMicro All-in-one unit combines a receiver, 2A brushed ESC, and 2 x linear servos in one compact micro sized PCB.

Specs.
Channels: 5
Frequency: 2.4Ghz
Type: FHSS
ESC: 2A integrated brushed
Size: 45.00mm x 7.80mm x 18.10mm
Weight: 2.7g (w/out wires)
Voltage: 3.0V~4.2V (1S Lipoly)
Antenna Length: 30mm

Features:
Programmable terminal output mode
Programmable ESC
1mm JST connector
Two additional servo ports
Compatible with the SuperMicro single linear servo (HK1300)
Compatible with the SuperMicro brushless ESC (HK030)

Included.
1 x HK0104ARX-L All-in-one unit

Requires.
2.4Ghz SuperMicro System module

  • SKU HK0104ARX-L
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 15.0000
  • Length 0.00
  • Width 0.00
  • Height 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I had the same problem a crafter - the ESC would not run a brushed motor no matter what I did or how I programmed things. I have no small brushless to test with so it's a bad deal in my opinion. Poorly written manual, also.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had the same problem a crafter - the ESC would not run a brushed motor no matter what I did or how I programmed things. I have no small brushless to test with so it's a bad deal in my opinion. Poorly written manual, also.

The Rx comes in an anti-static bag, with no instructions. I highly recommend downloading the manual from the "Files" tab

above, as it covers both the Tx modules and all the Rx in this range. As shown, my Rx weighed 3.04g. The battery connector fits the 1S Minium-style cells as is. Servo travel is around 3.5mm in each direction. This Rx supposedly has a built-in

brushed motor controller, but I think that's a lie! Regardless of which ESC mode I bound my Tx, I could not get my brushed motor to work. Bound in the 'external ESC' mode however, I was able to control an external Brushless ESC/motor via the motor connector. The included motor connector is tiny and may be hard to find a compatible one. I make my own. There are 2 points which will take 1mm screws for mounting this Rx. The antenna is a thin insulated wire, and I would advise strengthening its solder point with a bead of hot-melt glue. The max width of this Rx is 18.2mm, which should suit narrow-body models. I give it only 2 stars for the fact that the brushed motor controller does not work. HK should either tell us how to get the motor controller to work (int. brushed mode), or warn buyers about this fact and reduce its price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Rx comes in an anti-static bag, with no instructions. I highly recommend downloading the manual from the "Files" tab

above, as it covers both the Tx modules and all the Rx in this range. As shown, my Rx weighed 3.04g. The battery connector fits the 1S Minium-style cells as is. Servo travel is around 3.5mm in each direction. This Rx supposedly has a built-in

brushed motor controller, but I think that's a lie! Regardless of which ESC mode I bound my Tx, I could not get my brushed motor to work. Bound in the 'external ESC' mode however, I was able to control an external Brushless ESC/motor via the motor connector. The included motor connector is tiny and may be hard to find a compatible one. I make my own. There are 2 points which will take 1mm screws for mounting this Rx. The antenna is a thin insulated wire, and I would advise strengthening its solder point with a bead of hot-melt glue. The max width of this Rx is 18.2mm, which should suit narrow-body models. I give it only 2 stars for the fact that the brushed motor controller does not work. HK should either tell us how to get the motor controller to work (int. brushed mode), or warn buyers about this fact and reduce its price.

Customer files
Manual Download [1713]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!