Total Price

$0.00

Cart 0 Cart 0 Loading...

2-Axis Brushless Camera Gimbal Stabilization Control Board w/IMU

Generating Links

2-Axis Brushless Camera Gimbal Stabilization Control Board w/IMU

Price:

Now save save $0.00 $0.00

$51.71
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
9387000019-0
want FREE shipping? Click here to find out more!

This is a brushless gimbal control board which utilizes a 6-axis gyro/accel with Motion Processing Unit to stabilize your camera gimbal while in flight. It offers highly precise and smooth brushless gimbal stabilization at a very low price.

Features:
• ATMega328P microcontroller
• Onboard FT232RL for debug
• 2~6 cells lipoly input
• Multiport
• UART port
• MPU6050 6-axis gyro/accel with Motion Processing Unit
• On board logic level converter

Specs:
Dimensions: 50x50x9mm
Weight: 25g (including IMU board)

 

Note: This is a quality unit using new and genuine components from FTDI, TI and FCI. Do not be caught out with low quality equivalents using fake or recycled components. Be on the lookout for any board using components without part numbers printed on them or model and make information scratched off.

 

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

zizugrack | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 08, 2016

muy buen estabilizador, cuesto mucho echarlo a andar no es sencillo, se requiere paciencia y conocimientos previos del hobby, una vez configurado funciona perfectamente. Las entradas de pitch o roll que binen en el circuito impreso no sirven, hay que conectar los cables en las entradas A1 y A2 del circuito impreso.

richgod | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jul 04, 2016

Total waist of money & a lot of time!!!!!! Just don`t buy this board, you`ll spend hours trying to make it work until you just put it to garbage!!!!! if it works, why don`t they install a basic firmware before selling???
Hey HK, you forgot to put zero crown in your list...

richgod | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jun 17, 2016

Not easy to get this board going for a newbie...
None of the files on this site easy to follow, not even a file with the same board...
I have the usbasp adapter I previously used to flash a KK board, but no info for connection available.
Should have bought a rtr board instead....

Gavin | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Dec 25, 2015

The board itself is fine. It works for the most part really well. The software is a whole nother story. Just do yourself a favor and get the USBAVR programmer and flash it with nulled. It will save you some stress.

musaed | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Aug 19, 2015

lost money and time if you buy this control
"" mission impossible '''
:)
to set up this control

Terry | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jul 26, 2015

I have spent countless hours trying to 'tune' this controller. It is an utter nightmare. The so called documentation on the wiki is very very poor. I don't recommend this. It is ridiculously hard to setup. I still have not achieved a working setup.

Ola | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

May 05, 2015

Works perfectly. Flashed SimpleBGC firmware via USB. Soldered pitch cable to control pitch from reciever. Works brilliantly with 2208 motor gimbal.

mario | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Mar 28, 2015

Perfect product, I love it, it was not easy to setup, but with latest firmware 51, and correct setup with brugi sw and a very low P (PID) now it works perfect with my cheap HK Carbon Gimbal and my Gopro Hero 3.

S.K.E. | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jan 28, 2015

I received the V2 version NOT the V3 as advertised here.
Older product and more troublesome to update/configure
it will probably work i guess, still have to test it.
Beware!

AlQubaisi | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jan 18, 2015

You will receive aBGC 2.2 Brushless Camera Gimbal AIO Controller alexmos V2.2 Firmware w/ Sensor Voltage Step-Down Module which cheap clone

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
Martinez Manual Download [1485]
Connection Diagram Download [129]
blg-tool info Download [23]
Martinez Manual- Chinese Download [716]
PID Tuning Guide Download [38]
Anleitung Brushless Gimbal Controller V3 Download [1438]
BruGi_Martinez Set-Up Links - 2014 Download [23]
Martinez V3 pinout Download [200]
USBASP connection Download [11]
Martinez Gimbal Controller link Download [26]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!