MultiStar V-Spec 2205 - 2350KV Multi-Rotor Motor (CCW)
The Turnigy Multistar range of V-Spec Outrunners are designed for maximum performance. We've specified genuine N45SH magnets and copper wire with a very impressive lamination thickness of just .15mm allowing us to densely pack the stator with copper. So what does that mean? Just straight up performance.
V-Spec motors use current best practice manufacturing methods; Japanese bearings, N45SH magnets,NEW more efficient .15mm laminations, 180degC oxygen free copper wire .42mm single wire, 0.005g balancing tolerance, precision windings and rigorous post production inspection to ensure that only motors fully matching the specifications are made available for sale.
V-Spec motors are perfect for 150 to 290 size quads. They come with a larger 3mm shaft and bigger bearings for motors of this size. V-Spec motors have far less sync errors than other motors making them more responsive to pilot input. They are an excellent companion for 4-6” propellers.
• N45SH Magnets
• NEW more efficient 0.15mm Laminations
• 180deg oxygen free Copper wire
• 0.005g or better balancing
• NEW .42mm Single wire wound precision windings
• larger 3mm motor shaft
• larger bearing than similar sized motors
• lower sync errors
• ideal for 4-6" propellers
No Load Current: 0.6A/10V
Number of Poles:12N/14P
Dimensions: 22 x 5mm
Prop shaft: 5mm
Bolt hole spacing: 16 x 19mm
Lamination thickness: 0.15mm
Balancing spec: 0.005g or better
I only bought one because its states 420w just to test it before I committed myself for a set of four. As I thought running on 3s 1000mah battery and a 6x4 gemfan prop it only managed 110w so I tried a different watt meter and a fresh battery but still only got 115w drawing just over 10 amps. Like other reviewers I agree the motor runs smooth and quiet and is of reasonable quality, but dont be taken in by the stated power output.excellent price point look and run really nice.Great motors but i ordered 4... 2cw 2ccw i completed my build to find one motor was not working so hobby king replaced and less that 2 weeks later another motor has failed it still spins but drops power and gets really hot... hobby king is sending me another what a great company just be cautious with these motorsI ordered a set of four for a 210 fpv racer I currently fly, and I am very happy with these motors! I know in terms of benchmarks they don't lead the field, but real world is far from bench marks. These are a full package of excellent build quality, and high performance. The single thick wire is much more efficient than motors with multiple strands, the bearings are extremely smooth and quiet, and the magnets are strong. I have combined these with multistar 20 amp BlHeli-S ESCs, and 4s 65c Turnigy A-spec lipos, for enormous amounts of acceleration. If your looking to speed up your machine, give these motors a shot.Powerful, quiet, strong. Only problem is that they dont come with mounting screws.Great motors, low noise, great quality, cheap during salesAlso, ich bin gerade nicht so beeindruckt von den Motoren, der Erste zeigt schon Unregelmäßigkeiten im Lager nach etwa 1 Stunde Flug. Der Zweite brannte heute ab- und das beim Start, nicht so toll. Dabei habe ich die Motoren gerade mal 3 Wochen.These are good motors, the only issue I have is that it didn't come with mounting screws, which is why it's not five stars across the board.bin sehr zufrieden mit den Motoren.
Leistung satt und das schon an 3s mit 5x4 kingkong props.
kann sie sehr weiter empfehlen bis jetzt die besten die ich hattegreat motors, quiet, and the larger motor shaft gives it power with ease. If you lose a prop adapter you can use the multistar elite 2204 prop adapters