The Turnigy Multistar Elite range of outrunner motors have been designed to maximize performance through integrated design.
Built using the highest quality components including Japanese bearings, N45SH magnets, precision windings and more efficient .15mm laminations that produce 8% more power, these motors are perfect for 150 to 290 sized quads.
They also come with a built-in 30A BL Heli ESC which reduces weight as well as drag and this of course improves overall quad performance. Suitable for 4-6” propellers
These Multistar Elite motors are at the forefront of multirotor design and are a smart choice for your racing quad.
• Built-In 30A ESC for easy fitting
• N45SH Magnets
• NEW more efficient 0.15mm Laminations
• 180deg oxygen free Copper wire
• 0.005g or better balancing
• NEW .42mm Single wire wound precision windings
• larger 3mm motor shaft
• larger bearing than similar sized motors
• lower sync errors
• ideal for 4-6" propellers
ESC: Built-In 30A BL Heli
Max Amps: 25A
No Load Current: 0.6A/10V
Number of Poles:12N/14P
Dimensions: 22 x 5mm
Bolt hole spacing: 16 x 19mm
Lamination thickness: 0.15mm
Balancing spec: 0.005g or better
Thread Direction: CCW
Unit Weight (g)
Max Currents (A):
Length B (mm):
Can Length D(mm)
Total Length E(mm):
Would be nice to know what ESC menu is. (Manual or any literature).
Can this be re-flashed with different variants of BL heli?
Supplied hollow threaded shafts for spinners to screw onto are very thin and prone to breaking.these make nice install, work great good power and fly time.ONLY issue motors labeled wrong CCW MOTOR is CW & CW Motors is CCW install that way work great