New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

2206-140Kv Brushless Gimbal Motor (Ideal for GoPro style Cameras)

2206-140Kv Brushless Gimbal Motor (Ideal for GoPro style Cameras)

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$11.96
Status:
In Stock
SKU:
047000027-0
WANT FREE SHIPPING? Click here to find out more!

Looking to make your video platform ultra-smooth? This is the ultimate in smooth, high pole count purpose built brushless gimbal motors.

2206 motor comes with flush mounting so any DIY to PRO projects are simple and straight forward, it also comes with the standard female connector pre-installed, So wiring is as simple as plugging it in. It’s a perfect match to our Brushless Gimbal Stabilization Board and IMU.

The 2206 is the perfect size for cameras around 100-200 grams (GoPro style).

Specs:
Poles: 12N14P
KV(RPM/V): 140
Resistance: 11.25omh
Weight: 32.3g
Wire: 0.17mm
Torque: 230g
Bottom holes center to center: 16mm and 19mm
Top holes center to center: 12mm

  • SKU 047000027-0
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 38.0000
  • Length 35.00
  • Width 25.00
  • Height 35.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Not bad Motor, bought 2 and 2804 for a gimbal setup, one of the 2206 had open poles, Hobby-king quickly send me a replacement, the second one had issues with windings as well not completely open but high enough resistance to make the storm board crazy...Again Hobby-king replaced them without an issue, for some unapparent reason the first two motors had the grommet that holds the wire to the casing was tearing off the casing, the last one they sent the grommet was thicker...Overall its a good value as long as Hk stands behind their warranty...

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Not bad Motor, bought 2 and 2804 for a gimbal setup, one of the 2206 had open poles, Hobby-king quickly send me a replacement, the second one had issues with windings as well not completely open but high enough resistance to make the storm board crazy...Again Hobby-king replaced them without an issue, for some unapparent reason the first two motors had the grommet that holds the wire to the casing was tearing off the casing, the last one they sent the grommet was thicker...Overall its a good value as long as Hk stands behind their warranty...

In General, the motor is not bad, but has a big drawback, the wire output from the stator is loose and with a slight tension can come off. What happened with me. For mu in the Assembly of motor winding wire was pinched by the motor housing, in the end, it all worked for 2-3 minutes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

In General, the motor is not bad, but has a big drawback, the wire output from the stator is loose and with a slight tension can come off. What happened with me. For mu in the Assembly of motor winding wire was pinched by the motor housing, in the end, it all worked for 2-3 minutes.

Motor para gimbal muito bom desde que o peso da camera no ultrapasse o peso de uma GoPro.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor para gimbal muito bom desde que o peso da camera no ultrapasse o peso de uma GoPro.

These motors offer very smooth and silent operation. They work perfectly for the roll and pitch axises of a GoPro sized gimbal (I can imagine it would work exceptionally for the Mobius cam also).

***One thing to be careful of is splicing the wires or windings by over tightening mount screws on the motor causing them to go too deep.***

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These motors offer very smooth and silent operation. They work perfectly for the roll and pitch axises of a GoPro sized gimbal (I can imagine it would work exceptionally for the Mobius cam also).

***One thing to be careful of is splicing the wires or windings by over tightening mount screws on the motor causing them to go too deep.***

Em conjunto com a "Brushless Camera Gimbal Stabilization Control Board" e a cmara "1/3-inch SONY CCD Video Camera" estabiliza muito bem a imageml.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Em conjunto com a "Brushless Camera Gimbal Stabilization Control Board" e a cmara "1/3-inch SONY CCD Video Camera" estabiliza muito bem a imageml.

I used this motor for my custom 3 axis gimbal. Motor are so smooth compare with other motors that I tried. The only complain I have is the wire. They should use softter silicon and wish it come black rather than server colored wire. It's ugly to to see it on my custom gimbal and need to cut it and replaced. Please HK, release a version with different wire.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I used this motor for my custom 3 axis gimbal. Motor are so smooth compare with other motors that I tried. The only complain I have is the wire. They should use softter silicon and wish it come black rather than server colored wire. It's ugly to to see it on my custom gimbal and need to cut it and replaced. Please HK, release a version with different wire.

Small cheap powerful gimbal motor. The shaft does stick out 1mm so have to plan around that.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Small cheap powerful gimbal motor. The shaft does stick out 1mm so have to plan around that.

Great motor, perfect for small gimbal, with two of them I've build a simple gimbal for my esacopter with mobius action cam, here a first test of motors and gimbal control:

http://www.youtube.com/watch?v=QMgYe2dIWBA





verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor, perfect for small gimbal, with two of them I've build a simple gimbal for my esacopter with mobius action cam, here a first test of motors and gimbal control:

http://www.youtube.com/watch?v=QMgYe2dIWBA





Bottom holes center to center: 16mm and 19mm (this is the stator side of the motor with M3 bolt holes, typical distance of brushless motor mounting holes). Top holes center to center: 12mm (this is the can side of the motor with magnets and the bolt holes are for M2 bolts). Also, Length B is actually 18mm, Total Length E is correct at 19mm as the shaft protrudes 1 mm from the bottom.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bottom holes center to center: 16mm and 19mm (this is the stator side of the motor with M3 bolt holes, typical distance of brushless motor mounting holes). Top holes center to center: 12mm (this is the can side of the motor with magnets and the bolt holes are for M2 bolts). Also, Length B is actually 18mm, Total Length E is correct at 19mm as the shaft protrudes 1 mm from the bottom.

Perfect motor for the GoPro Hero3.
Smooth and silent. Use this for pitch and the bigger motor for roll.
My gimbal with board, motors, gimbal and GoPro only weights 216 grams.
Super pleased.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect motor for the GoPro Hero3.
Smooth and silent. Use this for pitch and the bigger motor for roll.
My gimbal with board, motors, gimbal and GoPro only weights 216 grams.
Super pleased.

  1. 1
  2. 2
Customer files
defect Download [1317]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save