Quanum Chaotic 3D Quad (RTF) (Mode 2)

Quanum Chaotic 3D Quad (RTF) (Mode 2)
Awesome!
Copy and Share the Below URL
Quanum Chaotic 3D Quad (RTF) (Mode 2)
This is Chaotic. What a way to go with this extreme 3D flying quad. There is no telling what you can do with this quad from slow stable (well semi stable) flight to buzzing around upside down for 3D flying with flips and rolls thrown in just for fun of it.
It comes with all the great gear for flying out of the box. The Chaotic is completely fitted out with the Quanum Madcow flight controller driving 2212-1300kv motors, Afro 30A ESC’s and big Gemfan 3D 8” propellers. Orange T-Six 2.4GHz Transmitter with ORX R415X Receiver. Electronics are covered in a vibrant polycarbonate shell for extra protection and easy orientation.
The Madcow flight controller comes preset with three flight modes.
Veal mode: (Stabilized mode) 0 – 100% of the throttle range corresponds to normal motor rotation only. In this mode the multi-rotor will maintain level balance automatically while roll and pitch are centered. The multi-rotor will not flip and roll and the angel of tilt is limited.
Grilling mode: (Acro Stabilized mode) 0% - 100% of the throttle range corresponds to normal motor rotation only. In this mode the multi-rotor will maintain level balance automatically while roll and pitch are centered. The multi-rotor will still flip and roll and the angle of tilt is not limited. This is often called “horizon” or “ratititude” mode but is not capable of inverted flight.
Madcow mode: (3D stabilized mode) 0% - 50% of the throttle range corresponds to reversed motor rotation, 50% - 100% range of the throttle corresponds to normal rotation. In this mode the multi-rotor will maintain level balance automatically while roll and pitch are centered. This is often called “horizon” or “ratittude” mode but with added reversing of motors for inverted flight.
3D flying - the Chaotic way to fly.
Features:
• Tough and light weight carbon fiber frame
• Large 400mm wheelbase
• Quanum Madcow flight controller for 3D flying
• Bi-directional 8” 3D carbon reinforced propellers
• Three stabilization modes – Veal (Stabilized), Grilling (Acro), Madcow (3D)
• OrangeRx T-Six 2.4GHz Transmitter with OrangeRX R415X Receiver
Specs:
Wheelbase: 400mm
Weight: 627g (without battery)
Motor: 2212 1300KV (DJI slot style shaft)
ESC: Afro ESC 30 Amp (SimonK firmware)
Flight Controller: Quanum Madcow 3D
Propellers: Gemfan Bi-directional 8in 3D Carbon Reinforced Propeller set CW/CCW Multirotor (DJI slot style)
Power distribution board: HobbyKing mini PDB with XT60 Connector
Transmitter: OrangeRx T-SIX 2.4GHz DSM 2 compatible 6CH Transmitter – Mode 2
Receiver: OrangeRx 415X
Included:
1 x Quanum Chaotic 3D Quad RTF
1 x Orange 2.4GHz Transmitter 6CH – Mode 2
1 x Manual
1 x Sticker set
1 x Velcro Tape
2 x Gemfan Bidirectional 8” Propellers (CW)
2 x Gemfan Bidirectional 8” Propellers (CCW)
Required:
4 x “AA” Batteries (for transmitter)
1 x Battery 4S 1800~2200mAh LiPoly pack
-
Quanum Chaotic 3D Quad
-
My show & tell + flight demo of the Chaotic :)
Alan | Verified Buyer
-
Overall
-
Quality
-
Value
Quanum Chaotic Quad & Tx.
Aug 15, 2018
FloridaAKM | Verified Buyer
-
Overall
-
Quality
-
Value
Great cruising quad with fragile props!
Jun 30, 2018
Michel | Verified Buyer
-
Overall
-
Quality
-
Value
Great Quad for the price
Nov 21, 2017
Kim Kim | Verified Buyer
-
Overall
-
Quality
-
Value
Wow! Lots of power!
Jul 22, 2017
Tony | Verified Buyer
-
Overall
-
Quality
-
Value
Great deal with great service.
Dec 25, 2016
Taylor | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
Aug 05, 2016
kydawg1 | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
May 02, 2016
kydawg1 | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
Apr 13, 2016
Madcow Manual (updated for OSD) | Download [6777] |
MANUAL | Download [115] |
madcow 3d assistant software zip | Download [220] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!