The Aomway 5.8G 25/200mW transmitter is very versatile and perfect solution for those looking for a high power output AV transmitter, especially for long range FPV use.
The versatility of this transmitter is in its power output settings. It can be operated in either 25mW for standard ranges or increased to the 200mW setting for longer range applications. The selectable 25 to 200mW feature is activated by jumpering the circuit board connections between the 25mW or 200mW pads adjacent to the antenna connector on the VTX board (Instruction manual and power a selection graphic locatd in "files" tab below).
It has adjustable frequency selection with 40 channels selectable so it is also excellent for FPV racing applications. A selectable 5 or 12 Volt camera power output is also incorporated in the design, all of which makes this a must have for those looking for a transmitter with good performance.
Note: Please check with your local authorities regarding the operation of this equipment before you purchase. Regulations on power output, usable frequencies and licenses’ to operate vary from region to region.
Note: For best range and video link stability we recommend using a circular-polarized Antenna (SMA) available below in the accessory’s tab
• Upgraded video circuit and sensitivity, with 25/200mW telemetry
• Powerful signal and long range capable
• 5.8GHz band
Power Consumption: 12V 700mA
Signal Power Output: 25mW/200mW
Channels: 40 A: 5705-5945MHz B: 5733-5866MHz; C: 5725-5865MHz D:5740-5860MHz; E: 5658-5917MHz;
Wide input voltage: DC 7-28V
Current: 80 mA
Output Voltage for CMOS camera operation: 5V or 12V
Antenna Connection: SMA
Aomway 25/200mW AV Transmitter
** The use and operation of this product in some countries may require a license based on local government restrictions. Ensure you check your local government rules before operating this device. **
this is a good little vtx.. cleanest signal ive had over 3 different vtx's so not a bad buy , yet to test the pwm channel selector but will be doing so in near future ,, the pushbotton channel selector is awsome !!!!!!! .. the 25/200mW selector is a bit misleading in design but if your nifty with a soldering iron i mannaged to ge a set of pin headers onto it and a computer style pin jumper onto it for field adjustment :) over all 10/10 for quality , 2/10 for design in reguards to the 25/200 selector .These would have to be one of the best vTx's around, very clean video.
Aomway Tx25-200mW selectable VTX download now [1450kb] Power Selection Instruction download now [27kb] Aomwax TX25 - Handbuch download now [164kb] Aomway Tx25-200mW selectable VTX PDF download now [697kb] TX25_1014777945X72279X27.pdf download now [164.18Kb]