New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

5W Green LED Alloy Strip 150mm x 12mm (3s Compatible)

5W Green LED Alloy Strip 150mm x 12mm (3s Compatible)

Discontinued Product

Please continue searching for a similar product.
Weight:
10 g
SKU:
371000067
WANT FREE SHIPPING? Click here to find out more!

5W Green LED Alloy Strip 150mm x 12mm (3s Compatible)

Specs:
Dimensions: 150 x 12mm
Weight: 8g
Connector: JST
beam angle: 120 degree
Power: 5w
color temperature: 520-525nm                   
Voltage: 11.1v-13.5v (3s Lipoly)               
Current: 300mA            
Luminous flux: 400-450LM            
Color rendering index: 70-85                
Material: aluminum plate                
Service life: 50000 hours                
Operating temperature: -20 - +60 degree Celsius

*Note: please make sure current draw is lower than 300mA or you risk damaging the LED strip
  • SKU 371000067
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight(g) 10.00
  • Length 155.00
  • Width 5.00
  • Height 45.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Brutal hell, kann man nur tagsber verwenden - sind richtig richtig gut. Werden mig warm...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Brutal hell, kann man nur tagsber verwenden - sind richtig richtig gut. Werden mig warm...

Extreme Bright !! be careful, the polarity its reversed on JST connector, you must solder a 4.7ohms/1W in series to avoid overheating

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Extreme Bright !! be careful, the polarity its reversed on JST connector, you must solder a 4.7ohms/1W in series to avoid overheating

Good Quality, extremely bright! If you have proper cooling, this is a very good product for your multicopter or helicopter. There must be direct propwash to the led, otherwise they heat up and melt... running them on 11.1V (3S lipo), works just fine.
Best at 8.4VDC don't get hot.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good Quality, extremely bright! If you have proper cooling, this is a very good product for your multicopter or helicopter. There must be direct propwash to the led, otherwise they heat up and melt... running them on 11.1V (3S lipo), works just fine.
Best at 8.4VDC don't get hot.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!