If you are looking for the ideal LCD monitor for your FPV ground station or any other form of aerial videography, the Fieldview 777 is your best choice! Designed specifically for FPV use and outdoor conditions, a foldable screen shroud is included for optimal viewing. This monitor has a very bright image which is fully adjustable, and a wide power supply voltage range (DC 6~18V).
The most important feature of the Fieldview 777 monitor for FPV users is that it does not switch to the "blue screen" when the signal gets weak. This allows you to fly much further without losing the image. When there is no video input, the monitor just shows static, it never turns blue or black.
• 7.0 inch TFT LCD Display
• Ideal for use with FPV
• No "Blue Screen" caused by weak signal input
• 800 x 480 High Resolution Display
• LED Backlight
• 16:9 Display Ratio
• 15ms Response Time
• 500:1 Contrast Ratio
• Wide 6~18V DC Input Voltage Range
• Foldable Screen Shroud for outdoor use included
Panel Size: 7.0 inch
Panel Type: TFT LCD
Horizontal Frequency Range: 30~60kHz
Field Frequency Range: 50~75Hz
Dot Pitch: 0.0642 (W) x 0.1790 (H) mm
Display Ratio: 16:9
Brightness: 400 cd/m²
Contrast Ratio: 500:1
Response Time: 15ms
Viewing Angle: 70°/70° (L/R) 50°/60° (U/D)
Input Voltage: DC 6~18V
Power Consumption: ≤ 5W
Working Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Dimensions: 182 x 127 x 32mm
Included in box:
7.0 inch TFT LCD monitor
Outdoor screen shroud
AC to DC adapter (100~240V AC input, 12V DC 1.5A output)
This is perfect monitor for FPV flyers. Resolution and image quality in general are very good. You probably can't get anything better for this price.
I've found only two minor disadvantages. The tripod mount is a little bit shallow, so it is better to fasten the monitor some other way. And be aware that the monitor's power adapter comes even from the European warehouse with american plug.
On the other hand, the monitor is really well packaged.
I can honestly recommend this screen.At first I couldn't get this screen working. I got it stuck in PAL M mode with no signal, so the screen is blue and I cannot access the OSD menu. For some reason, this screen does not allow you to access the OSD menu when there is no signal. Solved this problem by switching my FPV camera to PAL mode and so getting a weak signal and allowing me to access the osd menu to switch back into NTSC M for USA. After I got it working its a great screen. Very bright and with the shade on it doesn't matter where the sun is facing I can just setup and FPV right off the bat. Colors are great and resolution is acceptable for CCD cameras. Can screw into tripods too. Overall besides the flaw of not being able to access the OSD menu when there is no signal, this is a great little FPV screen.Bin super zufrieden mit dem Teil.
Kein abschalten wenn mal der Empfang schlecht ist.
Bin sehr zufriedenReplace the 15" computer monitor LCD with this 7" very bright.
You can find lower price on the netSuper Monitor, hlt was er verspricht.Hi,
great monitor for FPV, i use it with Boscam RC305 FPV equipment and have PAL system. It has also speakers, so audio works too. Byevery very good, works fine with the fat sharck predator v2, just use the cable that comes with the goggles plug in the monitor and you can fly with the goggles and someone else can watch what you see, very good!I am really pleased with this screen, I have a Fatshark Predator 2 and I was unconfutable not being able to quickly look for my model when I was further away, so being able to plug this unit into the goggles is the perfect solution! I have my screen mounted on a tripod at the moment and I am powering it with my spare fat shark headset battery, which works perfectly. Really Good!Great FPV monitor! I have to say I do not have any interference with a Vtx that is mounted on the back of the monitor as someone else has mentioned. Having already flown FPV with the monitor for about 20 hours, I totally recommend it for FPV pilots that need a transmitter mounted monitor powered by a 3s lipo in parallel with the Vtx. Thanks HK!Leider funktionierte mein LCD Monitor nicht, offensichtlich irgendein Fehler mit der Stromversorgung, auch nach Versorgung aus 3s Lipo anstelle Netzgert kein Lebenszeichen. Bei der bekannten Ersatzteilpolitik von HK bleibt nur die Bewertung.
Specs and Menue Options download now [233kb] Monitor in Fielduse 1 download now [273kb] Monitor in Fieluse 2 download now [154kb] cheap and easy antireflecting film download now [2060kb]