New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

9306MG Metal Gear Servo 19T 7.4g / 1.1kg / .16sec

9306MG Metal Gear Servo 19T 7.4g / 1.1kg / .16sec

Discontinued Product

Please continue searching for a similar product.
SKU:
9306MG
WANT FREE SHIPPING? Click here to find out more!
9306MG Metal Gear Servo  7.4g / 1.5kg / .16sec
Ultra slim, mini servo.

Weight
: 10.0g
Dimensions: 22 x 25 x 12mm
Torque @ 4.8V: 1.1kg-cm 
Speed @ 4.8V: 0.16sec/60deg @ no load 
Ball Bearing: One ball bearing on the top 
Gear Type: Metal Gear
Spline Count: 19
  • SKU 9306MG
  • Brand -
  • Shipping Weight 15.0000
  • Length 100.00
  • Width 12.00
  • Height 70.00
  • Torque(kg)(min. 0.01kg) 1.10
  • Speed (Sec/60deg) 0.16
  • A(mm) 29.00
  • B(mm) 22.00
  • C(mm) 25.00
  • D(mm) 12.00
  • E(mm) 32.00
  • F(mm) 15.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Nice little servo's, not used as yet though

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice little servo's, not used as yet though

Ordered this servo 2 times - and got different kind of servo .. this one with
12mm and smaller ones with 10mm ... both are not very good ...
the first 12mm i have used died after 3rd time of action. the two other have
problems to remember zero-position after power of and on.
the smaller ones are very slow. when they return to zero-position, the first 4/5
of the way will be done fast, but the last bit takes nearly a second ...
one more bad experience with rc-scanner products; i will not buy things of
this brand anymore ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered this servo 2 times - and got different kind of servo .. this one with
12mm and smaller ones with 10mm ... both are not very good ...
the first 12mm i have used died after 3rd time of action. the two other have
problems to remember zero-position after power of and on.
the smaller ones are very slow. when they return to zero-position, the first 4/5
of the way will be done fast, but the last bit takes nearly a second ...
one more bad experience with rc-scanner products; i will not buy things of
this brand anymore ...

Terrible servo and service. Out of 4 i ordered, 3 were a different model. Same part number but totally different. They asked me to take a tone of pictures to show them the difference then to send them back!!! not really worth my time. So i tried to use the sevos. Three out of the four total failed right away. Fist one was DOA, second the gears don't mesh and slipped! third jittered badly. i will not be trusted HK for their servoes again, and have warned the 200 members of my club, giving a full demo of the problems. I ask then to resend 3 correct servoes but they will not until they have the other s back. I dont have the time to play games. Typical cut rate customer service. IF THESE HAD GONE IN A MODEL THE MODEL WOULD HAVE BEEN DESTROYED FIRST FLIGHT!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Terrible servo and service. Out of 4 i ordered, 3 were a different model. Same part number but totally different. They asked me to take a tone of pictures to show them the difference then to send them back!!! not really worth my time. So i tried to use the sevos. Three out of the four total failed right away. Fist one was DOA, second the gears don't mesh and slipped! third jittered badly. i will not be trusted HK for their servoes again, and have warned the 200 members of my club, giving a full demo of the problems. I ask then to resend 3 correct servoes but they will not until they have the other s back. I dont have the time to play games. Typical cut rate customer service. IF THESE HAD GONE IN A MODEL THE MODEL WOULD HAVE BEEN DESTROYED FIRST FLIGHT!

Su peso real son 12 gramos

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Su peso real son 12 gramos

The servo is ok for the price, good torque and feel, but be carefull with the case, as it's holded by the plastic stripe only and not with screws. I glued one with CA and the glue evaporated through the case locking completely the gears

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The servo is ok for the price, good torque and feel, but be carefull with the case, as it's holded by the plastic stripe only and not with screws. I glued one with CA and the glue evaporated through the case locking completely the gears

Beim testen,vor dem Einbau, schon kaputt!
Ich habe schon mehrere Artikel bei Hobby King bestellt,dies war der erste Artikel der defekt war.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Beim testen,vor dem Einbau, schon kaputt!
Ich habe schon mehrere Artikel bei Hobby King bestellt,dies war der erste Artikel der defekt war.

light and accurate! good choise for metal heads

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

light and accurate! good choise for metal heads

very good servo using in a trex 450 xl

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good servo using in a trex 450 xl

I used their servomotor for swa 28, excellent a version from the servomotor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I used their servomotor for swa 28, excellent a version from the servomotor

rhg srthtr hnbtbs trb tsrnzjrdtjnhhtsrfhg ydg ydrgbs trxfhftdrgy grvs thts htsh st hst hsh st h

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

rhg srthtr hnbtbs trb tsrnzjrdtjnhhtsrfhg ydg ydrgbs trxfhftdrgy grvs thts htsh st hst hsh st h

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save