Total Price

$0.00

Cart 0 Cart 0 Loading...

ABS White 1kg 1.75mm HobbyKing

Generating Links

ABS White 1kg 1.75mm HobbyKing

Price:

Now save save $4.00 $4.00

Special Price $15.99 $15.99

You save save $4.00 $4.00

Was  $19.99

QTY:
Shipped From:
  • USA
  • Global
Already Purchased
Status:
In Stock
SKU:
741000069-0
want FREE shipping? Click here to find out more!

HobbyKing 3D Printer Filament 1.75mm ABS 1KG Spool (White)

HobbyKing have come out with a huge new range of 3D Printer Filaments at prices that will have you printing all day and all night.

The range covers PLA, ABS, Flexible, Color Changing, Luminous, Nylon, Polycarbonate, Acetal (POM), Metal Composite and even a water soluble filament for printing molds. So there is a filament for every project you have in mind. HobbyKing filaments have a stable melting point, good round shape and most importantly a 0.05mm uniform diameter tolerance for a consistent flow rate.

ABS:

ABS is a fantastic plastic for mechanical real world use prints where a durable item is required. It has some give under stress making it perfect for multirotor frames and gears. ABS also has a higher melting point making it more suitable for some applications.

For printing with ABS it is recommended to have a heated print bed or Kapton Tape for proper bed adhesion. ABS can also have a slight odor when printing so a well ventilated room is recommended, please note that it has no odor when the print is finished.

ABS is slightly harder to get dialed in unlike PLA, but once set up the printing is consistent and the prints are truly real world useable. Other popular uses for this material are R/C spare parts, building blocks and toys for the kids.

3D printing is a fun and exciting hobby with a wide range of uses from prototyping parts to making toys for the kids. Picking the right filament for your application is very important.

Features:
• Stable melting point
• Good round shape
• Uniform diameter tolerance 0.05mm
• Consistent colors

Specs:
Filament Material: ABS
Melting Point: 230°C
Print Temperature: 230-260°C
Filament Diameter: 1.75mm
Quantity: 1KG
Color: White

Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Lukrix | Verified Buyer

  • Value
  • Quality
  • Overall

Very good

Apr 22, 2019

Difficult to find the right setting for this filament but there is enough there for many tests, and it's cheap too.

Jan | Verified Buyer

  • Overall
  • Value
  • Quality

Yup it prints on a X5S

Apr 19, 2019

Works great but needs 245-250C for good layer bonding. I print with a bed temperature of 35C, crazy cool right? on vinyl sign tape and it sticks like crazy once you get the first layer close enough to stick.

Patryk | Verified Buyer

  • Overall
  • Value
  • Quality

Pretty darn good

Feb 10, 2019

Prints like a charm on Anycubic i3 Mega. Extruder 255C, bed 110C, simple enclosure and I can hardly see any warping. Seen some cheap PLA warping more than this stuff, actually. And doesn't smell as bad as ABS i printed years back. Great stuff, really.

Lukas | Verified Buyer

  • Value
  • Quality
  • Overall

Great for the price

Oct 08, 2018

So inexpensive using a Prusa P3 steel clone with a bunch of tweaks. I run this hot around 250-260 with 10% fan(after first layer or two), that works well for me to balance quality and strength. If strength isn't important then dropping the temp down will give better surface finish to the parts.
Overall though good stuff, ordering 5 more spools right now.

Michael | Verified Buyer

  • Overall
  • Value
  • Quality

Prints like a Charm on CR-10S

Oct 07, 2018

First test on CR-10s without housing went good on a small rim diameter 50mm hight 5mm.
No warping and good surface quality so far.
Nozzle 260°C
Bed 100°C
Bed Buildtak
Housing None

Major | Verified Buyer

  • Value
  • Quality
  • Overall

Good for this price

Jun 13, 2018

I printed this with my Anet A8 printer and with Mk8 extruder. First time i think its trapped a lot of moisture, while is it popping. After some print i figured out that is not moisture, while the gap happening on the same side (other sides are ok). I turned off the retraction and all gap dissapeared.
I printed it at 235°C and 90°C heatbed temp.
The other solution to eliminate the gap maybe go lower temp with the hotend and i can use the retraction for less stringing.
Isn't warping if you use hairspray on glass sheet. Its holding very strong the part on the heatbed, but after cooling down you just need to take the part without force.

Major | Verified Buyer

  • Value
  • Quality
  • Overall

Good for this price

Jun 13, 2018

I printed this with my Anet A8 printer and with Mk8 extruder. First time i think its trapped a lot of moisture, while is it popping. After some print i figured out that is not moisture, while the gap happening on the same side (other sides are ok). I turned off the retraction and all gap dissapeared.
I printed it at 235°C and 90°C heatbed temp.
The other solution to eliminate the gap maybe go lower temp with the hotend and i can use the retraction for less stringing.
Isn't warping if you use hairspray on glass sheet. Its holding very strong the part on the heatbed, but after cooling down you just need to take the part without force.

Simon | Verified Buyer

  • Quality
  • Overall
  • Value

Good filament

Feb 05, 2018

Printed at 250°C and bed heated at 110°C and got nice prints, without too much warping.
Printed about 500g so far without clogging.
Good for everyday prints, but not enough for really precise prints.

gaekay | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Sep 23, 2016

matière parfait pour nos impression 3D, utilisé sur malyan M150, M180 et minifabrikator!! prix plus que attractif dans un support parfait. j'adore !! je le recommande

Samuel | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jul 09, 2016

Needs high temp, 250° to melt. Warps quite a lot. Nozzle < 0.5 always clogging. Its okay for every day prints. Difficult for large prints.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!