ADS400L Water-cooled Brushless3700 600w
Motor Size: 480 Class
Voltage Range: 7.2v~11.1v (2s~3s )
No Load Curr: 1.1A
Max Load: 40A
Dimensions: 28 x 45
Front Mounting Hole Distance: 16 & 18mm
Front Mount Thread Size: M2.5
Shaft Diameter: 3mm
Shaft Length: 14mm
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Fixed into my JOYSWAY SUPER MONO X, you definitely do not regret this motor ability .combine with Turnigy 60a 9215000124-0 brass Propeller 430 HK-5B11x30 3s 2200 40c. Recommeded item !! Thanks..who can help
want to use this motor in HK sponson boat (outrigger)
what kind of propeller can be used by 2s or 3 s
thank you for answering
hollaendersgasseJust got this motor the other day and installed in one of my boat's the shockwave 26 v.3. This is perfect for upgrading to brushless, running a 60a turnigy marine ESC. Had to drill new holes in the motor mount & grid a flat spot on the motor shaft for the couplers set screw. 2 easy mods, ran on 2s 30-40c the other day & was pleasantly surprised. I ordered a 3s 2650mh 20-30c with this motor & when I ran it the power seemed great till full throttle. It stumbled and didn't want take full throttle. I didn't et a chance to adjust the timing as it was set a step above default like 17 or 18.5. So probably just need to turn timing down, I saw this motor in a impulse 26 with a 70a birdy on 3 s & was stupid fast. Still on 2s its really fast & sounds bad a$$.?????
???????????Nice motor, lots of power. No problems with leakage and it runs cool. I used this to upgrade my Impulse 26 to brushless. I dropped this in with a Birdie 70A boat ESC and a 3S 2500mAh battery and WOW! It's a rocket!i bought this motor and there is a leakage (not at those nipple but at the body of the water cooled thing) that make my motor smooking... so your faith with these motor depends on production quality .. tq.im using this motor in my tear into jet boat, goes great but does have a stutter on start up but once its goin its good on 2 or 3s had the amp meter on it on 3s and pulled 52 amps 564 watts, using the 50 amp watercooled birdie esc. very light weight for the power. only slightly slower than my other boat with the 3900kv watercooled inrunner and 100grams lighter. 4 stars because of the stutter. will try and post vid.Nice strong engine. Put it into my small bolt with the 60A MARINE ESC an a 3s 2200 mah 25C using a octura 430.
Fits with light modification. Ultra fast setup engine temp about 30-40C and a runtime of 8-10 min in average. Tighten the waterinlet only by hand or it will brake.