New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

AeroStar™ AS-170MG Micro MG Servo 3.5kg / 0.11sec / 17.5g

AeroStar™ AS-170MG Micro MG Servo 3.5kg / 0.11sec / 17.5g

Discontinued Product

Please continue searching for a similar product.
SKU:
9399000013
WANT FREE SHIPPING? Click here to find out more!

If you're looking for a high quality micro servo for your new parkflyer project, look no further than the Aerostar AS-170MG.

The AeroStar AS-170MG is a micro size servo featuring a metal gear train, durable plastic case, and a fast 0.11sec transit time.

Specs:
Operating Voltage: DC4.8~6.0 V
Operating Speed: (4.8V) 0.13sec/60°
Operating Speed: (6V) 0.11 sec/60°
Stall Torque: (4.8V) 3.0kg.cm
Stall Torque: (6V) 3.5 kg.cm
Gear Material: Metal
Gear Type: Analogue
Motor: Coreless
Spline Count: 25T
Dimensions:29.5x11.6x30.2mm
Weight: 17.5 g
Connector Wire Length: JR 180mm

 

  • SKU 9399000013
  • Brand AeroStar
  • Shipping Weight 38.0000
  • Length 100.00
  • Width 15.00
  • Height 50.00
  • Torque(kg)(min. 0.01kg) 3.50
  • Speed (Sec/60deg) 0.11
  • A(mm) 35.00
  • B(mm) 30.00
  • C(mm) 32.00
  • D(mm) 12.00
  • E(mm) 41.00
  • F(mm) 20.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I ordered four of these servos and one had a dead spot and jumped over that spot when operating. Hobbyking came through with a replacement in short order. The replacement was a bit jittery at first, especially near the end of sweep, but after running a few minutes on a servo tester it calmed down and is now working fine. Now I have four servos that are smooth, quiet at all speeds and very precise for analog servos (decently powerful too). Adjusting the tester by 1us showed a slight angular change so these servos are comparable to digital for precision. The servos recenter perfectly at 150us repeatedly so that is nice. Originally I was a bit dissapointed that 1 of 4 servos was defective but Hobbyking stood by thier product and made good... (I actually think the postage to send out one replacement servo was more than the cost of the servo...Customer service! :-) )

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

I ordered four of these servos and one had a dead spot and jumped over that spot when operating. Hobbyking came through with a replacement in short order. The replacement was a bit jittery at first, especially near the end of sweep, but after running a few minutes on a servo tester it calmed down and is now working fine. Now I have four servos that are smooth, quiet at all speeds and very precise for analog servos (decently powerful too). Adjusting the tester by 1us showed a slight angular change so these servos are comparable to digital for precision. The servos recenter perfectly at 150us repeatedly so that is nice. Originally I was a bit dissapointed that 1 of 4 servos was defective but Hobbyking stood by thier product and made good... (I actually think the postage to send out one replacement servo was more than the cost of the servo...Customer service! :-) )

The sample I tested is smooth and quiet in operation. The size is similar to New Power XL-16HM/17HMB but slightly taller, so bespoke wing servo mounts will require minor modification.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

The sample I tested is smooth and quiet in operation. The size is similar to New Power XL-16HM/17HMB but slightly taller, so bespoke wing servo mounts will require minor modification.

but heavier then describtion: 20.8g without lever/screw. Smoothly and low noise

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

but heavier then describtion: 20.8g without lever/screw. Smoothly and low noise

Bought 4, all OK. BUT: Weight is 20.8g without lever/screw! 3.3g heavier than described. 4*3.3g=13.2g. Good centering, low noise.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Bought 4, all OK. BUT: Weight is 20.8g without lever/screw! 3.3g heavier than described. 4*3.3g=13.2g. Good centering, low noise.

Bought 4, all OK. BUT: Weight is 20.8g without lever/screw! 3.3g heavier than described. 4*3.3g=13.2g. Good centering, low noise.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Bought 4, all OK. BUT: Weight is 20.8g without lever/screw! 3.3g heavier than described. 4*3.3g=13.2g. Good centering, low noise.

I like the brand, the price and the talk.

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

I like the brand, the price and the talk.

I like the brand, the price and the talk.

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

I like the brand, the price and the talk.

I bought these servos for my Multiplex Twinstar. 5 of the 6 I bought work fine. The 6th works also, but the manufacturer forgot a minor detail: the output shaft bearing...
So the servo is not usable, but for that price, I will not complain.

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

I bought these servos for my Multiplex Twinstar. 5 of the 6 I bought work fine. The 6th works also, but the manufacturer forgot a minor detail: the output shaft bearing...
So the servo is not usable, but for that price, I will not complain.

credo e spero che sono ottimi e la prima volta che li compro

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

credo e spero che sono ottimi e la prima volta che li compro

Be carefull.The servo is very bad and dangerous cause when is back in land looks ok. When the servo is working a lot the first plastic gear (on the motor shaft) starts to fail cause the servo motor becomes hot and the first gear starts to drift on the motor shaft (when the servo colds down the servo looks ok). But in the air you loose the plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Be carefull.The servo is very bad and dangerous cause when is back in land looks ok. When the servo is working a lot the first plastic gear (on the motor shaft) starts to fail cause the servo motor becomes hot and the first gear starts to drift on the motor shaft (when the servo colds down the servo looks ok). But in the air you loose the plane.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save