Alloy DPS 64mm 10 blade Electric Ducted Fan Assembley 3300Kv

• Overall
• Quality
• Value

Customer Rated

Apr 16, 2016

Der Impeller ist super gewuchtet und hat in keinem Drehzahlbereich Vibrationen. Eingebaut in meinem Stinger 64 komme ich auf folgende Messdaten.
Regler Hobbyking 80A ESC 4A SBEC, Timing Auto
Turnigy Graphene 45C 2200
Stromaufnahme 73,5Ah
1104,8Watt
1120gr Schub
Negativ ist nur sein hohes Gewicht, was allerdings beim Stinger kein Nachteil ist, da ich sonst Blei im Heck gebraucht htte, um den Schwerpunkt einzuhalten.

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 20, 2015

Amazing power but mine vibrated like crazy so I've sent it back

• Overall
• Quality
• Value

Customer Rated

Jul 09, 2015

I am using it for the Stinger 64 MK 2 jet. It fits perfect and the power is wow. Measured 228 km/h speed for the stinger. The sound is fantastic.
Operating data: 80 Amp SBEC, 4S 2700mAh 40C Lipo - measured current 58A (974 Watts). For the Stinger is about 1.200W/kg - amazing performance. :-))

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 13, 2014

Get these for any 64mm edf that has gear. Quiet and fast. Takes a little time but they sound and perform great.

• Overall
• Quality
• Value

Customer Rated

Nov 02, 2014

I installed a set of these along with a set of the Turnigy 85 amp ESC into my Dynam A-10
The fit was pretty good with little modification. The ESCs did need some modification. The plane will fly vertical on 4S with no problems. I have not flown on 3S. Take is in half the distance as the stock EDFs. The sound is like the real thing just amazing. I had to mount the ECS into the fuselage under the engine nacelles. I included pictures below. Also I confirm that these units have the Dr. Mad Thrust logos on them.

http://i98.photobucket.com/albums/l247/agennello/IMAG0834_zps86c5eaa4.jpg

http://i98.photobucket.com/albums/l247/agennello/IMAG0835_zpsc81b20c4.jpg

http://i98.photobucket.com/albums/l247/agennello/IMAG0836_zps855f46ec.jpg

• Overall
• Quality
• Value

Customer Rated

Apr 22, 2014

I'm using this on a Freewing 64mm F22. Fits very well, minor foam triming for motor wires to channel through. In air frame produces 63A and 931w using 4s 2650mah lipo. Comes assembled and pretty balanced. There was minor vibration at a specific RPM, not bad though. Ordered 4/2014 and still had Dr Mad Thrust sticker on it.

• Overall
• Quality
• Value

Customer Rated

Mar 20, 2014

fantastic edf sounds like a real jet engine and flies even on a 5s 3000 Mah
Lipo with 50A ESC with Ubec. My speed record with a Garmin GPS in T4 Hawk 155 KM /H . Next Chalenge with 6S in sam e setup. This toy gives me an enormous enjoyment.

• Overall
• Quality
• Value

Customer Rated

Feb 22, 2014

LOVE THIS THING, put it in my Stinger 64 MkII and finally get 150MPH regularly. I recommend this EDF unit for the following reasons:
-Sound
-Performance
-Ease of Use (Installation)
-All Around Value

By the way, the Product Techs at HK recommened this 85a 100amp burst Turnigy ESC:

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=36511

It has made all the difference, I Have added videos and file photos of its performance which were taken when I had just a 60a ESC, so its even more amazing now.

• Overall
• Quality
• Value

Customer Rated

Feb 10, 2014

I fit this on a Sonic 64 along with a 60A UBEC ESC and 2200 mAh 4s 30C battery. The addition of weight to both front and aft seems to have balanced out really well so that it has a good CG.

The airplane now has much more power, but only to be used for short 10 second bursts due to high heat in the cockpit and 85A burst limit of the ESC. It achieves unlimited vertical easily, and cruises at about 35pcnt throttle with a very clean, quiet sound.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 07, 2014

Put this in a T45 64mm Goshawk Jet with a Turnigy dlux 100A sbec esc and running on 4 cell nano-tech A-spec 65-130c , and it flys realy nice its quick for me ,so easy to hand launch, almost takes off from your hand ,and the sound is just amazing not flying flat out yet and getting about 3min with battery still having about 30/40 pcnt left .. will put a watt meter on this week and post figures .