A really scale looking set of oleo's with anti-rotation links and scale twin wheels suitable for the smaller jet models. Robustly made with a sprung shock absorbing strut and a strong anti-rotation link to ensure the wheels stay in the direction intended. Also included is a steering arm for the nose strut.
U/C Pin Size: 3mm
Length of Leg: 79mm (top of strut to center of axle)
Strut Diameter: 8mm
Weight: 37g (main leg each)
Weight: 29g (nose leg)
Wheels: 36 x 9mm (mains)
Wheels: 29 x 8mm (nose)
These things are awesome. For the money its almost like they're giving them away.You can take off the wheels on the mains, cut down the axle and use a single 50mm wheel. I've done this exact thing and now I have oleo struts on my FW 70mm Rebel for less then $15. All three axles are the same the only difference is the wheel size on the nose strut. Even though Ive given this setup 5 stars across the board it did not come with the rotational steering arm. No biggie, I got plenty from motionrc.The three struts are nice, you can remove the axle and use your own which means you can put bigger wheels etc on them. The Oleo sliding seems to work ok, it doesn't bind.
Recommended for 1100-1400mm planes, for the price well worth the upgrade.
- DOES NOT come with rotational linkage, this is a little dissapointing since I saw it in the pic and was expecting it! I ordered two sets and neither had it. (but see above still worth it)
- The tires are a little iffy, but look nice you might need to glue them in place.Quality excellent, as is the value. Would have given 15/15 but only 14/15 because of two sets I received, neither had the Steering Arm assemblies included.I have purchased several sets of this landing gear. For the price, you cannot beat this set!!! I fell in love with this set lol... If you have a park flyer size aircraft, or jet, this is the set for you. The quality is awesome and the shock absorbing ability is unmatched by sets at this price. Trust me, if you buy this set, you will not be disappointed!!
Mike...Great dual wheel legs. I've used the mains as nose wheel legs in my 90mm FlyFly F4 Phantom and the 90mm FlyFly Mirage. They will also be used in my Haoye Global Hawk for main gear. Top quality for a bargain price.Just received these. Very nice for the price. I will cut off the axle on the mains so I will use only one Wheel, will leave both wheels on the nose gear. I will install them on a small 90mm sport jet, less than 3kg, will be just perfect. Price is a killer for 3 oleos, working cissors, 6 aluminum wheels and nice rubber tires.super value for the money. love it!good product.. I like:it..