Very well made and finished lightweight alloy straight oleo strut with swinging arm suitable for mains or noselegs on jets and other scale aircraft. This strut is sprung loaded which helps smooth out those slightly heavy arrivals.
Length to Axle Center: 145mm
Retract Mounting Pin: 5mm (not included)
Axle Diameter: 5mm
Max Wheel Diameter: 64mm (2.5ins)
Max Wheel Width: 22mm
Robustezza e stile semplice e funzionale, montata su JET anteriore.These struts are Great! Much better than the ProLink gear that always side load and wear out in one season. Prolink knows the weak spots and will not fix them so you have to pay $80 a strut every year!! if you fly from grass. With these struts the forces are directed evenly and straight down the middle. Only one problem... the Spring is WAY TO SOFT. You need to add a 20lb spring to each strut if you have a 20lb plane.(yes thats double for hard landings) Had the springs been stronger... this would be a 5 star product. Im using them on my Xcalibur Jet now.Aluminum appears to be very soft as is the spring. quite loose at all joints so will shim up with brass tubing to increase wear ability. Shouldn't have to do this for the price which should be closer to $10 usd.For the size of plane you use these for, spring has to be stronger. but very well made product. I just go to local store to find stronger springDecent quality and construction, I had problems with the springs being too weak for an approx 3.5KG Piper commanche, I had to use different springs from a hardware store to get them working properly.... still good value though.Great look, fine workmanship but the spring inside is too week. I used it on a 83" and 14 lbs electrically propelled Piper Arrow II but during take off run the spring is totally compressed. I'd suggest to use a harder springFits perfekt on my 3,5KG Cessna.
I bought this to replace the stock nose gear on a cessna 140 size. No mods needed, bolts right up and it looks Great too.