Aomway 5.8GHz 1000MW TX1000, RX04 Receiver and 600TV lines CMOS 5V camera set (Pal) w/o DVR

The Aomway 5.8GHz 1000mW TX1000 Transmitter , RX04 Receiver and 600TV lines CMOS 5V camera set is the perfect combo for those that are looking for a high power output set, ideal for long range FPV work in one easy to use package.

The 5.8GHz AV receiver is a great accessory for your FPV system! Nice and small in size for easy integration into your ground station, but big on quality and features. The receiver uses the same two button interface, one for the band and one for channel with a bright LCD, making channel swapping a breeze. There are two independent AV outputs for both audio and video. Powering the receiver at the field is as easy as plugging in a 2~6 cell lipoly into the included prewired cable. It just doesn’t get any simpler than this.

The Mini 600 TV lines camera with built in microphone is a small but high quality camera made for FPV applications. The camera has a shielded A/V cable and standardized 5 pin connector that is plug and play with most video transmitters. The CMOS FPV tuned sensor is great in all light conditions and even comes with a lens adapter if you want to change the FOV.

The TX1000 video transmitter packs 1000mW of ultra clean 5.8GHz power in a conveniently sized and durable video/audio package! Adjustable frequency selection and a selectable 5 or 12 Volt camera power output makes this a must have for those looking for a robust transmitter with good performance. 

Note: Please check with your local authorities regarding the operation of this equipment before you purchase. Regulations on power output, usable frequencies and licenses’ to operate vary from region to region.

Note: For best range and video link stability we recommend using circular-polarized, Patch or Helical Antenna Set (SMA) available below in the accessory’s tab

Features:

Camera
• Fatshark and Aomway direct matched plug (5V)
• Built in microphone
• Shielded A/V cable
• 600TVL resolution
• Mini Sized at just 15x15x23mm

Transmitter
• Upgraded video circuit and sensitivity, with 1W telemetry
• Blue semi - transparent shell, more convenient for use
• 5.8GHz band FM audio/video transmit synchro
• Stereo, left/right audio channel independent transmission

Receiver
• 5.8GHz receiver (No DVR function), with 32 frequency points covering almost all the frequency band
• Frequency band and frequency point independent display
• Upgraded video circuit and sensitivity, with 1W telemetry and approximately 32KM range
• 5 db omni antenna

Specs:

Transmitter 
Range: approximately 32KM
Low consumption: 12V 700mA
Power: 1000mW/30dBm
Frequency: 15CH, CH1-7, +CH1-8
Built-in two emission frequency: 5740-5860MHz/5705-5945MHz
Format: NTSC/PAL
Wide input voltage: DC7-16V
Output Voltage for CMOS camera operation: 5V or 12V (switch through jumper)
Current: 12V 650mA
Antenna Connection: SMA
Size: 63x35x24mm
Weight: 42g with case

Camera
Image sensor: CMOS
Lens: 2.8mm
TV system : Pal
Horizontal resolution: 600TVL
Picture elements: NTSC
S/N Ratio: >=48 db 
Usable illumination: 0.5Lux
Scanning system: NTSC:510x492(H),Pal:500x582(V)
Net weight: 13g
Cable length: 25cm
Size: 15x15x5mm
Connector:  JST: suit for AOMWAY 5.8G 200mW mini Transmitter Dupont: suit for the AOMWAY 5.8G 1w, 500mW transmitter, Fatshark transmitter, Immersion transmitter.  Not for the Boscam transmitter (12v VS 5v)

Receiver
Working Frequency: 5740-5860MHz (Fatshark dedicated) / 5705-5945MHz (Universal) 5733-5866MHZ/5725-5865MHZ
Wide input voltage: 7V-16V
DC:  12V, 170mA
Channels: 15 transmit channels, CH-1 7channels CH-2 8channel
Sound: Two-channel stereo output
AV Video Output: 2 AV output
Weight: 126g
Size: 80x70x25mm

Package Includes:
One 1000mW Transmitter
One 32 Frequency point Receiver
Two 5db Antennas
Two DC cables
Two Video cables

Attention Customers

** The use and operation of this product in some countries may require a license based on local government restrictions.  Ensure you check your local government rules before operating this device. **