The Aomway 5.8GHz 1000mW TX1000 is the perfect option for those that are looking for a high power output transmitter with integral cooling fan, ideal for long range FPV work in one easy to use unit.
The TX1000 video transmitter packs 1000mW of ultra clean 5.8GHz power in a conveniently sized and durable video/audio package! Adjustable frequency selection and a selectable 5 or 12 Volt camera power output makes this a must have for those looking for a robust transmitter with good performance.
Note: Please check with your local authorities regarding the operation of this equipment before you purchase. Regulations on power output, usable frequencies and licenses’ to operate vary from region to region.
Note: For best range and video link stability we recommend using a circular-polarized Antenna (SMA) available below in the accessory’s tab
• Upgraded video circuit and sensitivity, with 1W telemetry
• Blue semi - transparent shell, more convenient for use
• 5.8GHz band FM audio/video transmit synchro
• Stereo, left/right audio channel independent transmission
Range: approximately 32KM
Low consumption: 12V 700mA
Frequency: 15CH, CH1-7, +CH1-8
Built-in two emission frequency: 5740-5860MHz/5705-5945MHz
Wide input voltage: DC7-16V
Output Voltage for CMOS camera operation: 5V or 12V (switch through jumper)
Current: 12V 650mA
Antenna Connection: SMA
Weight: 42g with case
One 1000mW Transmitter
One 3db Antenna
One Video cable
Awesome transmitter I've done over 20km with this it's super reliable and added advantage of setting the voltage regulator 5v or 12v for feeding your flight cam power.
The guy below either had a bad unit or more then likely stuffed it upAbsolutely terrible. It is getting hot and turns off. It worked only for couple of flights and the range was moderate. Nowhere near claimed range ( I used good antennas)