New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Aomway Mini 200mW VTX and FPV Tuned 600TVL Camera Combo (NTSC 2)

Aomway Mini 200mW VTX and FPV Tuned 600TVL Camera Combo (NTSC 2)

Shipped From:
  • Global

Now save save $0.00 $0.00

$39.07

We are sorry, this product is not available in your country

Status:
In Stock
SKU:
523000022-0
WANT FREE SHIPPING? Click here to find out more!

The Aomway Mini 200mW VTX and FPV tuned 600 TVL combo with match Plug and play cables

The Aomway Mini video transmitter packs 200mW of ultra-clean 5.8GHz power in a micro sized video/audio package! A must have for those looking to save size and weight while still getting good performance. The Aowmay is transmitting a full range of 32 channels and only weighs 6g. It’s perfect for a wide range of aircraft, especially small models and 350 size multi-rotors such as Quanum Nova, DJI Phantom, QR X350 and more!

Aomway's new Mini 600 TV lines camera with built in microphone is the perfect plug and play Camera for Mini to large models needing a small but yet quality camera made for FPV applications.

The camera has a shielded A/V cable and standardized 5 pin connector that is plug and play with most video transmitters. The CMOS FPV tuned sensor is great in all light conditions and even comes with a lens adapter if you want to change the FOV.

Features:
• Micro sized and light weight - perfect for use with small models
• 32 channels: Cover A, B, E and F bands
• Transmitter frequency: 5645-5945MHz with 200mW power output
• Built in microphone
• Shielded A/V cable
• 600TVL resolution
• Mini sized at just 15x15x23mm

TX Spec:
Modulate: Wideband FM Modulate
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Output Power: 23~24dBm
Channel: 32CH
Operating Voltage: 7V~24V
Supply Current: 190mA
Operating Temperature: -10~85 Video Band Width : 0~8.0 MHz
Audio Carrier Frequency: 6.5MHz
Video Input Level: 0.8~1.2 Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5~2.0 Vp-p
Audio Input Impedance: 10K Ohm
Connector: SMA (NOT RP)
Dimension: 26mm x 23mm x 8mm
Weight: 6g (without antenna)

Cam Spec:
Image sensor: CMOS
Lens: 2.8mm
TV system : Pal 
Horizontal resolution: 600TVL
Picture elements: NTSC
S/N Ratio:>=45d
Usable illumination: 0.5Lux
Scanning system : NTSC
Net weight:13g
Cable length: 25cm
Size : 15mm x 15mm x 5mm
Connector:  JST: suit for AOMWAY 5.8G 200MW mini Transmitter Dupont: suit for the AOMWAY 5.8G 1w, 500mw transmitter, Fatshark transmitter, Immersion transmitter.  Not for the Boscam transmitter (12v VS 5v) 

Included:
Aowmay 5.GHz 200mW 32CH A/V transmitter
Aomway 600TVL FPV Tuned Cam (NTSC)
A/V cable and Power cable
3dbi Omni antenna 

Note: Feedback has shown that transmitting distances in the vacintiy of 1500m (open area) have been achieved.

Attention Customers

** The use and operation of this product in some countries may require a license based on local government restrictions.  Ensure you check your local government rules before operating this device. **

  • SKU 523000022-0
  • Brand Aomway
  • Capacity (mAh) -
  • Shipping Weight 82.0000
  • Length 135.00
  • Width 45.00
  • Height 45.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Nice combo set, and very small to fit in even my Mini Sparrow FT plane, has a good image and decent range

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice combo set, and very small to fit in even my Mini Sparrow FT plane, has a good image and decent range

Awesome plug and play setup on a small plane. Good range for a 200mw when combined with an inverted vee and a helical antenna. the wire on the vtx connectors break away easily so put some rubber cement on them and dont work them anymore than you have to. Camera has decent clarity, light response, good on cloudy days but not at dawn or dusk. All in all a great buy for the money. Works with my friends fatsharks too!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome plug and play setup on a small plane. Good range for a 200mw when combined with an inverted vee and a helical antenna. the wire on the vtx connectors break away easily so put some rubber cement on them and dont work them anymore than you have to. Camera has decent clarity, light response, good on cloudy days but not at dawn or dusk. All in all a great buy for the money. Works with my friends fatsharks too!

The transmitter works great with my Immersion receiver. But unfortunately the camera sends a NTSC signal which cannot be displayed by my video goggles. :-(
So all I get is a black image. And it does not look like you can switch the camera to PAL...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The transmitter works great with my Immersion receiver. But unfortunately the camera sends a NTSC signal which cannot be displayed by my video goggles. :-(
So all I get is a black image. And it does not look like you can switch the camera to PAL...

TX great. Camera is OK.

Works with most 32CH receivers and will probably be able to hit Fatshark bands?

Very happy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

TX great. Camera is OK.

Works with most 32CH receivers and will probably be able to hit Fatshark bands?

Very happy.

Transmitter is nice and camera is good for outside sunny day use. It requires a lot of light or it will just show s black and white picture. Granted it is a small $15 camera. Why are the cables always so long and heavy on mini camera. Would have been nice for them to have a socket on the cam and not hardwired it out wit a foot long cable. Shortening it correctly would be a real pain and cutting and splicing always looks like a hack job and doesn't bend well at the joint. Good thing is it uses standard picoblade connectors so repinning is an option.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Transmitter is nice and camera is good for outside sunny day use. It requires a lot of light or it will just show s black and white picture. Granted it is a small $15 camera. Why are the cables always so long and heavy on mini camera. Would have been nice for them to have a socket on the cam and not hardwired it out wit a foot long cable. Shortening it correctly would be a real pain and cutting and splicing always looks like a hack job and doesn't bend well at the joint. Good thing is it uses standard picoblade connectors so repinning is an option.

Trasmitter is great and does what is expected of a 200MW but the camera is horrible. Visual quality is average and the wiring is worse, playing with the cable and a wire disconnects from the board in the camera.. Theres $20 gone

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Trasmitter is great and does what is expected of a 200MW but the camera is horrible. Visual quality is average and the wiring is worse, playing with the cable and a wire disconnects from the board in the camera.. Theres $20 gone

Just got it and wow its small, only tested it a little with both my fatsharks and my diversity monitor . no issues as of yet but will check out range and stuff soon. put the tiny circular antenna on it as well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just got it and wow its small, only tested it a little with both my fatsharks and my diversity monitor . no issues as of yet but will check out range and stuff soon. put the tiny circular antenna on it as well.

Super nice product, work good with my Fatshark Attitude v2 Goggle. See more info at :http://www.miniquadreviews.com/aomway-mini-200mw-vtx-and-fpv-tuned-600-tvl-combo/

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super nice product, work good with my Fatshark Attitude v2 Goggle. See more info at :http://www.miniquadreviews.com/aomway-mini-200mw-vtx-and-fpv-tuned-600-tvl-combo/

Customer files
Aomway 200 Mini Manual Download [488]
IMG_20180111_102554.jpg Download [2]
IMG_20180111_102554.jpg Download [2]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!