Arkbird 2.0 Autopilot System New Firmware V3.3024
Arkbird 2.0 Autopilot System New Firmware V3.3024
Copy and Share the Below URL
The Arkbird 2.0 Autopilot System is a second generation flight stabilisation, autopilot and navigation system that is the perfect choice for fixed wing model aircraft especially those being flown in FPV mode where a reliable autopilot is almost a mandatory inclusion.
The Arkbird 2.0 is a fantastic plug and play system that is easy to install, easy to use and is packed full of features such as GPS waypoint flight, "Return to Home" functionality, auto-leveling, altitude hold and much more!
For critical flight stabilisation it utilizes GPS, barometer and attitude sensors to stabilize the model in flight but that's not all this system can do.
With the Arkbird 2.0 Autopilot System on-board your model, there is also no need to worry about losing control if ever you fly out of sight! You simply flick a switch and the "Return to Home" function can be activated. You can do this at any time to fly your model back to its take-off position and as a safety feature it is activated automatically if your model flies out of RF range.
In FPV mode the integrated OSD system will provide you with all of the critical information you need during your flights such as altitude, direction, home direction, roll angle, pitch angle and time since take-off, just to name a few.
The Arkbird Autopilot System comes with everything you need to setup your FPV model for the ultimate in GPS based Autopilot flight including a GPS unit, battery current sensor and airspeed meter. All power plugs and wire connections are included or pre-installed.
Autopilot systems are becoming more popular in radio control operations and especially so in FPV flying and that's why it makes sense to go with a system that has fantastic functionality, versatility, has been tried, tested and works and that's the ARKBIRD 2.0 Autopilot System.
**Update in new firmware V3.3024**
1. New “Fighter 3D” option in OSD. The airplane attitudes will be shown as a 3D animation. 8 airplane 3D image selectable.
2. “Data Diagram” function was optimized to cope with sudden change in altitude.
3. New “Semi-Balance Mode” in CTL. Balance mode activated when CH1 & 2 is less than 50%. Gyro Mode activated when CH1 & 2 is more than 50%.
Features:
• GPS, barometer and attitude sensors to stabilize/control your model's flight
• Integrated HD OSD functionality
• GPS based "Return to Home" functionality
• GPS waypoint flight/Geofencing programmable
• "Cruise Flight" mode offering straight and level flight pattern holding
• Auto-leveling
• Programmable for V tails, delta wings, flying wings and other configurations
• Easy to setup and adjust
• Can be installed flat or on its side
• Hand launch assist
• Hover (hang on prop) mode
• Flight data logging
Specs:
Autopilot board Dimensions: 60x40x20mm
Weight:27.7g
Includes:
Arkbird 2.0 Autopilot System
Airspeed Meter
GPS Unit
Battery Current Sensor
Cables
Instructions
| Manual | Download [1816] |
| arkbird 2.o manual by go229 | Download [1778] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!
