Total Price


Cart 0 Cart 0 Loading...

Avios (PNF) Extra 330LX V2 3D Aerobatic Airplane EPO 1420mm (56")

Generating Links

Avios (PNF) Extra 330LX V2 3D Aerobatic Airplane EPO 1420mm (56")


Now save save $20.00 $20.00

Special Price $329.99 $329.99

You save save $20.00 $20.00

Was  $349.99

Shipped From:
  • USA
  • Global
Already Purchased
In Stock
want FREE shipping? Click here to find out more!

The all-new Avios Extra 330LX V2 builds on the foundations laid by the V1, but with some much-needed improvements. It's now not only a great introduction to 3D flying but a true, hardcore 3D performer!

Working in collaboration with top Belgium 3D pilot Tom De Weerdt, the Avios team has created in the V2, a model made BY 3D pilots, for 3D pilots. Improvements include a more powerful, out-of-the-box 4S set-up giving incredible sports aerobatics performance that's ideal for getting to grips with 3D maneuvers, and an option for a 5S set-up, delivering full-blown 3D power, control, and prowess with just the change of the ESC. The control surfaces have been refined over many hours of flying and tuning by Tom De Weerdt and the team, improving servo resolution and control. The airframe itself has been strengthened too, with a stronger/reinforced firewall design and tail wheel system, yet remains lightweight and rigid. And, most noticeably of all, the Avios Extra 330LX now sports a stunning new scheme, masterfully painted and with pre-applied decals that looks impressive from any angle.

In-flight, the Extra 330LX V2 now tracks with great precision, rolls are axial and crisp, and on high throws the roll rate is phenomenal. There is next to no coupling in knife-edge, making it a perfect platform for classic/pattern flying. The out-of-the-box standard 4S set-up generates more than enough power for unlimited vertical performance, switch to high rates/3D throws and the 3D creature emerges! The stock set-up has ample power for most of the "low and slow" 3D maneuvers. With very little wing rock it's the perfect airplane to practice harriers, high alpha knife edge, hovering, and rolling circles, etc.

Want some extra power to practice modern-day extreme aerobatics? Then upgrade to a 70 or 80amp ESC, plug in a 5S LiPo, and you are ready to have some extreme fun. You will notice straight away the extra speed, but more importantly, you'll be able to use that extra pull-out power and throttle control during your maneuvers. This added power will make your pop tops, rifle rolls, and all the extreme 3D moves that much more aggressive, ideal for experienced 3D pilots.

The "Plug N Fly" Extra is made of EPO foam and is big enough to provide great presence in the air yet breaks down quickly for transport thanks to the 'click in' wing system. The new power set-up includes a more powerful 4248-600KV brushless outrunner with a lightweight 14x7 wood propeller and 60amp Aerostar ESC. Pre-installed 25g, metal-geared, digital high torque servos provide plenty of power and strength for the large control surfaces.

Want to get into 3D flying? Then the Extra 330LX V2 is the perfect choice, and the sky your playground. Start with the recommended set-up, and gradually increase your throws and expo. This way the plane's capabilities will grow with your own skills and progression. With strengthened firewall and landing gear, and the upgraded power system, the Extra will take a bit of a beating, it will be the go-to airplane in your hangar for a very long time!

So if you are new to 3D flying or are an experienced 3D pilot looking for that quick 3D flying fix only PNP models can offer, then look no further than the new 1450mm Avios Extra 330LX V2.

• Lightweight aerobatic 3D sports plane in EPO foam
• Plug N Fly format for optimum performance and quick build time
• V2 version has been refined over many hours of flying by Tom De Weerdt, and the Avios team
• Upgraded 4S power system, 3D power out-of-the-box
• Strengthened airframe, landing gear, and motor mount
• The fit and finish of components has been improved
• New striking color scheme
* Option to run 5S for full raw 3D performance, with no changes other than the ESC (70amp recommended)

Wingspan: 1420mm (56")
Length: 1350mm (53")
Weight: 1950g (4.3lbs)
ESC: Aerostar 60A
Motor: 4248 600KV Brushless Outrunner
Servos: 4 x 25g high torque metal gear
Propeller: 14x7

Avios Extra 330LX V2 EPO airframe
4248-600KV brushless motor
60A Aerostar brushless speed controller
14x7 lightweight wood propeller and spinner
Main wheels and tailwheel assembly
Large diameter carbon wing joining tube
Complete hardware pack including horns, control rods, nuts, bolts, screws, etc

4 Channel or more transmitter and receiver
3000~4000mAh 4S LiPo battery 40C+ or 4S LiHV for stock set-up, 2700-3700mah 40C+ for option 5S set-up
70~80A ESC for 5S set-up

Note: A copy of the instruction manual is available under the "Files" tab.

  • IC/2:Elec Electric
  • Motorsize(diam-or-cc) 42.00
  • Wingspan(mm) 1420.00
  • Length(mm) 1350.00
  • Avios Extra 330LX V2 Official HobbyKing Flight Review
  • Avios Extra 330LX V2 Unboxing, Tips and Flight Review by Tom De Weerdt of Sky Studio
  • Avios Extra 330LX V2 Unboxing by Essential RC
  • Avios Extra 330LX V2 Flight Review by Essential RC
  • Martin Pickering review of Avios Extra 330LX V2
  • Avios Extra 330LX V2 (PNF) 3D Aerobatic Airplane EPO 1420mm (56") - 3D Flight Demo
Upload video

Only registered users can upload video. Please, log in or register

Sort by
Most Recent Topics
* Nickname:

* Your Reply:

Please, enter the text shown in the image into the field below
*Verification Code:
Post a new Topic
* Nickname:

* Your Topic:

Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Teemu | Verified Buyer

  • Quality
  • Overall
  • Value

Very good size quality plane

Jun 15, 2021

This was bigger than I expected. Very nice features and a well thought-out layout with plenty of space inside the fuselage. Did not come pre-adjusted contrary to as Tom said in a video. Had to adjust all the pushrods, servo arms etc.
Landing gear is the weak spot in this plane. Aluminum bends on hard impacts and the wheel arches break easily. Also the wheel screws bend very easily and are not that convincing on holding on to the wheels.
All in all very good plane for the cost.

enrevat | Verified Buyer

  • Quality
  • Overall
  • Value

bel avion

Jun 14, 2021

avion de bonne qualite

John Howard | Verified Buyer

  • Quality
  • Overall
  • Value


Jun 10, 2021

This plane could be good
Howaver the paint was flaking off during assembly
The elevator and rudder servos dont centre accurately. They pick up different positions depending on which direction the servos drive.
The plastic fairings around the undercarriage are fragile and dont fit properly
The wheels run on 2.5mm screw threads so they wont last long
The model was very well packed but went downhill after.

cubnuts | Verified Buyer

  • Quality
  • Overall
  • Value

a good airplane

May 20, 2021

Great airplane, very acrobatic and a good value for the money. Only short coming is the landing gear. It's not at all robust, really requires good flying skills and a very smooth runway.

Fabryking | Verified Buyer

  • Quality
  • Overall
  • Value


May 16, 2021

materiale ottimo come sempre avios ma' questa volta la verniciatura e' orribile
e mancano pcb innesto ali servi era fondamentale che vi fossero.

Customer files
Avios (PNF) Extra 330LX V2 Instruction Manual Download [7]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!