This model is one every pilot should own, performance is excellent and the quick, simple build will have you in the air in no time, when it comes to smiles for Dollars, the Floater-Jet can't be beaten, happy to be flown at speed or float around on minimal power, it's the perfect choice for beginners and experienced flyers.
Equipped with a high-kv motor, small propeller and a very smooth finish EPO foam surface (almost glossy) this plane can reach high speeds in a short amount of time, yet glide in gently to land thanks to it's forgiving stall and low wing loading.
An extremely easy plane to fly, ideal for beginners at half throttle and for experienced fliers, open the throttle for a noisy, fast eye opener flight.
• Plug and Fly - Just add battery and receiver
• Tough molded EPO foam airframe
• Easy to fly, great for learing to fly
• Fuselage access hatch for easy battery swap
• Fast assembly time, be in the air in no time
Fuse Length: 830mm
Motor: 2100Kv 3S Outrunner
Propeller: 5x5inch x 2pc
Servos: 4 x 9g servo
4 Channel Transmitter and Receiver
1800~2200mAh 3S Lipoly
- Blade Count:
Can you put this beautifuuul plane in EU WH again for 60-70$! If yes tyvm.
Have a nice day! :)
1)Excellent materials - solid and looks great!
2)Quick and easy assembly (i put the battery and i not care about the GC)
3)Easy to lauch and landing (really! i'm absolute beginner)
4)It can fly very slowly and it is easy to fly for beginners (I flew only 2 times, long time ago). it can glide well with no gas.
5) Can be fast also (motor has very good power) and can do acrobatics (i make a loop)
6) very cheap!
7) The servos looks not very durable... but they still work!
i flew only 1 time with this plane, no crash no problem.
i fly with 3s 2200 mah (30 min approx. cutted automatically at 3,3v per cell)
thank you HK!!!
Video of one of the first fly.
Very good model! Light ! Awesome flys !
Very good plane for who wants to learn flying or looks for something cheap and not so big to fly with standard 2200 3s batteries to keep in the car and fly everywhere you are.
Best prop for learning is 6x4, for fun 6x5. I would not recommend the 5x5 provided on this setup. Using a colet will burn the motor after some time due to vibrations, I recommend to keep using the o ring and prop saver provided on this 2208 motor.
good jet, although i dont know how to fly. its a good learner plane that can be crashed and quickly put back together with some hot glue :)
awesome plane from beginner to pro you can still have a blast with this plane, very easy to fly and great value for money.
Excellent Plane. After watching youtubes on how to assemble it took about 2 hours, but I was working really slow and it was my first time.
On the second launch, I had it in the air flying all smooth, all over the park. This was my first flight. It even survived a hard landing when I lost sight.
I can't say enough about the build quality, flying experience, and handling. I had a seasoned rc flyer with me, and he was amazed at the balance.
What a great experience with a great plane.
Mine didn't come with glue, but I had my own. I also installed the larger battery 2200mah. I put some tape on the bottom for landings and only glued in one of the rods for the wing (in case i had to take it apart for travel.)
first fly. speed controller wigged out turned off everything and hit the ground. originally thought it was my receiver. repaired plane. different receiver and flew again. same thing. Changed speed controller over to a brand name one and it's fine. so i have a brand new plane which has been repaired twice due to a Dodge speed controller. First real maiden flight was crap while i waited for it to crash again. But no, fly's now i have replaced the speedie.
Overall, very pleased with the AXN, the aileron push rods could do with being a little longer as on my 5th or 6th flight one came loose and fell out, never to be seen again. butchered and old plane and made replacements for both and she flies on
word of warning to new buyers....the included servos ( blue 9g ) are complete an utter crap.
i had to replace the rudder one after the second flight and yesterday the elevator servo jammed and i lost my plane. it crashed 500 meters away as i was unable to regain control with a jammed elevator. my friend and i recovered the plane and i discovered the elevator servo was jammed. i removed the faulty servo. when i opened the faulty servo i found the 3rd gear had broken which jammed it.Another weak point and a design flaw, is the air vent under the motor on the fuselage boom...the opening os the vent is causing a stress point and weakening the tail boom, so on even a belly flop it will snap the boom.
2200 3S Battery modificatio download now [126kb] horn modification download now [42kb] AXN Floater-jet with Turnigy 30fps micro download now [351kb] my axn floater-jet download now [233kb] Manual download now [493kb] Ukraine Ivano-Frankivsk download now [293kb] Official Clouds Fly manual download now [493kb] AXN Floater Jet manual feb2011 download now [1362kb] minsk download now [1202kb] Avec EDF rapide download now [1653kb] No File Name download now [1892kb] Avec EDF rapide download now [1653kb] Avec EDF rapide download now [1653kb] Aoxan AE-25A ESC (Similar Version) download now [945kb] AXN FPV w/ gear download now [7kb] my axn download now [1548kb] Me and axn download now [686kb] AXN PROP download now [83kb] axn 1 download now [48kb] axn repair download now [34kb] axn repair 2 download now [50kb] 873713700X1632080X3.png download now [55kb] CRASH download now [3263kb] CRASH download now [3263kb]