New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

B2040-3500kv Brushless Motor (Gold+Black)

B2040-3500kv Brushless Motor (Gold+Black)

Discontinued Product

Please continue searching for a similar product.
Weight:
89 g
SKU:
B2040-3500
WANT FREE SHIPPING? Click here to find out more!

RPM: 3500kv
Max Watts: 315W
Max Voltage: 11.1v 3S
Resistance (MΩ): 80
Idle Current: 1.6a
Recomended ESC: 25A

*Limited Stock

  • SKU B2040-3500
  • Brand -
  • Shipping Weight(g) 89.00
  • Length 0.00
  • Width 0.00
  • Height 0.00
  • Kv(rpm/v) 3500.00
  • Max Current (A) 25.00
  • Resistance (mh) 0.00
  • Max Voltage(V) 11.00
  • Power (W) 315.00
  • Shaft A(mm) 2.30
  • Length B (mm) 40.00
  • Diameter C(mm) 20.00
  • Can Length D(mm) 40.00
  • Total Length E(mm) 62.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Put this in My Firebird phantom. Absolutely Screams. Wing snapped in half because there was so much speed:) If planning to use this setup be sure to reenforce your wing. Using with 18a plush and 4.1x4.1 prop. Awesome motor. Thanks HK!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Put this in My Firebird phantom. Absolutely Screams. Wing snapped in half because there was so much speed:) If planning to use this setup be sure to reenforce your wing. Using with 18a plush and 4.1x4.1 prop. Awesome motor. Thanks HK!

Stosunek Ceny do Jakoci Bardzo dobry.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Stosunek Ceny do Jakoci Bardzo dobry.

I had an EasyGlider with a brushed motor. After three attempts to get it to climb, I went with this and a 25 amp ESC. Amazing difference. Now climbs to almost out of sight in 90 seconds, 25 min flights are easy.
The threads fit the gearbox perfectly and the pinion gear (10 tooth) fits right off the old brushed motor. A drop in replacement and at least 3X the performance. Used Turginy 2 cell 2200 mah battery. This is good!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had an EasyGlider with a brushed motor. After three attempts to get it to climb, I went with this and a 25 amp ESC. Amazing difference. Now climbs to almost out of sight in 90 seconds, 25 min flights are easy.
The threads fit the gearbox perfectly and the pinion gear (10 tooth) fits right off the old brushed motor. A drop in replacement and at least 3X the performance. Used Turginy 2 cell 2200 mah battery. This is good!

I have installed it in my 1/16 Monster Beatle as a replacement to the original motor that was burnt.
I am operating it on 2S Lipo but I tried it also with 3S.
So far no problem at all apart from the fact that after 10 minutes of use it becomes very hot and it is a little slower compared to the original (that one was 4814 KV).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have installed it in my 1/16 Monster Beatle as a replacement to the original motor that was burnt.
I am operating it on 2S Lipo but I tried it also with 3S.
So far no problem at all apart from the fact that after 10 minutes of use it becomes very hot and it is a little slower compared to the original (that one was 4814 KV).

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!