Copy and Share the Below URL
R8DM 40mhz Dual Modulation 8Channel Receiver
BLUEARROW R8 series are BLUEARROW newly developed high performance dual conversion
receiver with digital circuit. The stable performance of these receivers are ensured by BLUEARROW
patented technology and unique MCU programming technology.
BLUEARROW R8 series dual conversion receiver come with excellent sensitivity rand very high
selectivity. And their low-signal auto-cutoff & protection feature is great to protect your plane from
All BLUEARROW R8 series dual conversion receiver come with standard JR socket.
BLUEARROW R8D uses 50T dual conversion crystal which is compatible with standard Futaba/Hitec
dual conversion crystal.
BLUEARROW R8DM uses ultra small UM-5D dual conversion crystal which is the smallest in the
Selectivity: =53dB+/- 4KHz
Weight: R8DM 10.5g R8D 10.7g (with antenna, socket and shrink wrap)
Channel: R8D/ R8DM 1-8CH
Compatibility:FM PPM transmitter (automatically compatible with positive and negative shift
transmitters like Futaba, JR, Hitec, Multiplex, Sanwa, GWS etc.)
Effective Receiving ranging: >800M (>0.5 mile)
Note: This is the basic spec of R8D/ R8DM dual conversion receiver; field test could exceed this
data due to different radio used.
Interference test: Connect the receiver to servo (radio and receiver should be on the same channel).
Turn on another radio on an adjacent channel and put it close to the receiver. The receiver should
work properly (servo does not glitch at all).
Operating current: 10mA
Input current: V (4-cell) ESC is recommended to power these receivers.
Available frequency: 35M, 36M, 40M,41M,72M.
To view the manual, please visit our documentation section;
Capacity (mAh) -
Shipping Weight 50.0000