BAE Hawk EDF kit
This kit is a full kit, complete with the following.
Brushless Outrunner & EDF
40A Brushless Speed Controller
Landing gear & steerable nose wheel.This is a beautifully painted and detailed kit. Its no wonder the BAE Hawk has a cult following and very popular amoung EDF enthusiests!
The wing comes lightened and includes balsa inserts for the aileron servos.
It will take you around 3-4hrs to finish this model.
Required.2200mah 14.8v Lipo (Not included)Servos (Aileron, elevator, rudder) 9-20g sized
Wiring accessories, such as shrink tube, connectors and 12AWG silicon wire.
5min or 15min Epoxy Glue.
Fan is built into the kit, so be sure to test the power system prior to installation. We recomend epoxy glue for a faster build. Included glue can take up to 1day to dry completely.
*Plane will fly well if run with a 5S or 6S pack. A 3S pack will not power the EDf sufficiently.
EDF fan has been replaced with a larger and more robust unit.
i received mine today....but im very sad that the kit has a little damage...a fracture to the body and a hole bcos of the motor shaft .......the ducted motor was put on the body during packaging.......im a little disapointed.....n last week i ordered 2 more plane kit...,...i hope this matter doesn't happen to my other kit i've odered........,The Jet is clearly NOT vectored thrust. Vectored thrust is generally used WITH standard flight surfaces.
I just ordered one of these (leaving 1 in stock afterwards) And hope there is no issue of bad stock count!! Or a dud!
Really look forward to get this jet in the air. I may change fan asap!I bought this Hawk and it came without any info on motor or esc no programming info for esc no name on esc so how are you going to set up the esc without infoHei. Flott fly for utstilling, men det m mye motor til for at det skal bli fart p denne. Prvde med et friskt 5S batteri. Da brant motoren opp.. Men morro var det.No esta conseguido, necesita mas bateria de la indicada y ser lanzado con lanzadra para coger antes la velocidad adecuada.Cames with 4200 mAh, very nice and very light and very good price.
RamonEte kit viene con un completo equipo ara , en pocas horas disfrutar de un vuelo muy agradable.
Muy recomendableLas instrucciones de montaje son deficientes y el avion tiene un golpe y se desintegraI got mine with a 75A speed controller and a 3S 2200mAh Lipo which I never used. I started straight ahead with a 5S 2200mAh Lipo from Polyquest. The manual to build the plane is more than pore. It took me about a day to figure out how to put the jet together. I made my 1st flight today and it flew perfect at the first two minutes than I had to land because the EDF simply melted away. The motor is too small for 5S Lipos, it overheated. Bought now a 7 blade EDF and a bigger motor. Overall the plane is the price worth any time.Anyone tell whether it is vector thrust or normal controls